Re: Port forwarding behind two routers
On Wed, 19 Nov 2008, Jakub T wrote: 2008/11/15 Luke Dean <[EMAIL PROTECTED]> Port-forwarding through two NATs is something I've never had any success with. I have a few suggestions that have worked for me and my friends with this setup. A) Disable NAT on the ADSL router. I think the term is "bridged mode". Turn it into a dumb box and shift all the NAT/firewall/routing responsibilities over to your wireless router. Depending on your ISP, the hardware, and the protocols involved, this may not be an option for you. B) Disable NAT on the wireless router. This allows it to be a simple switch and wireless access point. The price is that you're probably relying on the DHCP server in the wireless router for your wireless devices and you'll have to disable the DHCP when you disable NAT. This creates new problems to be solved. C) Plug the FreeBSD box into the ADSL router, skipping the wireless router. Your wireless devices will still be double-NATted, but if you're not running servers on them, you might be able to live with that. Luke, Thank you very much, your advices were very helpful and I now have a working port forwarding through two routers. Sorry for the delay in the answering, it took me some time to test various options... Actually your (A) advice is what did the job. I turned off DHCP server on ADSL router and enabled "NAT - DMZ Host" option on it (for which I realized that it was the closest to your description of "bridged mode"). Then I configured the wireless router to use static IP config instead of expecting DHCP server. The situation is now this: INTERNET | telephone/adsl-wire | | ADSL router wan : xx.xx.xx.xx FreeBSD box (wired) lan : 192.168.1.1 ip: 192.168.0.102 | laptopgateway: 192.168.0.1 | (wireless)| [internet plug]ip: 192.168.0.101 | Wireless router gateway: 192.168.0.1 | wan : 192.168.1.2:| lan : 192.168.0.1 . . . . . :| [ethernet plug] | | | +---+ DMZ host for ADSL router is 192.168.1.2 -- and it works! I have one question more (forgive my ignorance): now the wireless router is configured to use static IP config and I must provide one or more "Static DNS servers" to it. Is it ok to type just "192.168.1.1" as DNS (which works for now) or to copy DNS servers which are automatically provided to the ADSL router by the ISP? Your solution is a little different from what I was suggesting, but it might be a better solution in some ways. If 192.168.1.1 really works as a source of DNS, I would take that to mean that your ADSL router is passing your name requests along to the nameservers that the ISP provided it. That's good. If your ISP ever moves its nameservers, it will tell your ADSL box about it, and the changes should propogate. If you hardcoded your DNS addresses into your wireless router, you would have to change them by hand if a change was ever required. I believe your wireless router is now responsible for being the firewall for your network, so make sure you've set that up. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Port forwarding behind two routers
2008/11/15 Luke Dean <[EMAIL PROTECTED]> > > Port-forwarding through two NATs is something I've never had any success > with. I have a few suggestions that have worked for me and my friends with > this setup. > > A) Disable NAT on the ADSL router. I think the term is "bridged mode". > Turn it into a dumb box and shift all the NAT/firewall/routing > responsibilities over to your wireless router. Depending on your ISP, the > hardware, and the protocols involved, this may not be an option for you. > > B) Disable NAT on the wireless router. This allows it to be a simple > switch and wireless access point. The price is that you're probably relying > on the DHCP server in the wireless router for your wireless devices and > you'll have to disable the DHCP when you disable NAT. This creates new > problems to be solved. > > C) Plug the FreeBSD box into the ADSL router, skipping the wireless router. > Your wireless devices will still be double-NATted, but if you're not > running servers on them, you might be able to live with that. > > Luke, Thank you very much, your advices were very helpful and I now have a working port forwarding through two routers. Sorry for the delay in the answering, it took me some time to test various options... Actually your (A) advice is what did the job. I turned off DHCP server on ADSL router and enabled "NAT - DMZ Host" option on it (for which I realized that it was the closest to your description of "bridged mode"). Then I configured the wireless router to use static IP config instead of expecting DHCP server. The situation is now this: INTERNET | telephone/adsl-wire | | ADSL router wan : xx.xx.xx.xx FreeBSD box (wired) lan : 192.168.1.1 ip: 192.168.0.102 | laptopgateway: 192.168.0.1 | (wireless)| [internet plug]ip: 192.168.0.101 | Wireless router gateway: 192.168.0.1 | wan : 192.168.1.2:| lan : 192.168.0.1 . . . . . :| [ethernet plug] | | | +---+ DMZ host for ADSL router is 192.168.1.2 -- and it works! I have one question more (forgive my ignorance): now the wireless router is configured to use static IP config and I must provide one or more "Static DNS servers" to it. Is it ok to type just "192.168.1.1" as DNS (which works for now) or to copy DNS servers which are automatically provided to the ADSL router by the ISP? Once again, thank you. Jakub ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Port forwarding behind two routers
B) Disable NAT on the wireless router. This allows it to be a simple switch and wireless access point. The price is that you're probably relying on the DHCP server in the wireless router for your wireless devices and you'll have to disable the DHCP when you disable NAT. This creates new problems to be solved. no problem. ADSL router can do DHCP for everything. C) Plug the FreeBSD box into the ADSL router, skipping the wireless router. Your wireless devices will still be double-NATted, but if you're not running servers on them, you might be able to live with that. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Port forwarding behind two routers
On Sat, 15 Nov 2008, Jakub T wrote: Good day people, I'm trying to get wireless Internet access for my laptop and to use this wireless router as a switch for my FreeBSD box at the same time. This wireless router has one Internet plug and for Ethernet plugs for wired boxes. Now I have this situation: INTERNET | telephone/adsl-wire | | ADSL router wan : xx.xx.xx.xx FreeBSD box (wired) lan : 192.168.1.1 ip: 192.168.0.102 | laptopgateway: 192.168.0.1 | (wireless)| [internet plug]ip: 192.168.0.101 | Wireless router gateway: 192.168.0.1 | lan : 192.168.0.1 . . . . . :| [ethernet plug] | | | +---+ The wireless router software configured the router like this: Destination LAN IP Subnet Mask GatewayInterface 0.0.0.0 0.0.0.0 192.168.1.1 WAN (Internet) 192.168.0.0 255.255.255.0 192.168.0.1 LAN & Wireless 192.168.1.0 255.255.255.0 192.168.1.2 WAN (Internet) ... so it works as a switch for two boxes and as a router at the same time. The FreeBSD box is configured like this: ifconfig_XXX0="inet 192.168.0.102 netmask 255.255.255.0" defaultrouter="192.168.0.1" Now I have Internet connection on both computers. However, I can't get aMule and other apps that need port forwarding working on FreeBSD box. First, I tried to configure ADSL router (192.168.1.1) just to forward 4662 port to 192.168.0.102, doesn't work. Then, I tried this: 192.168.1.1 router: forward 4662 to 192.168.0.1 192.168.0.1 router: forward 4662 to 192.168.0.102 not working again. I have a feeling that I'm missing something very simple, but can't figure out what. (A note: before I acquired a wireless router, forwarding with one router was just working, with FreeBSD box configured as 192.168.1.101, so that side of things is ok. And, no, it's not possible to use just wireless router because I can't plug telephone wire in it.) Can anyone help me? Should I post more details? TIA, Jakub Port-forwarding through two NATs is something I've never had any success with. I have a few suggestions that have worked for me and my friends with this setup. A) Disable NAT on the ADSL router. I think the term is "bridged mode". Turn it into a dumb box and shift all the NAT/firewall/routing responsibilities over to your wireless router. Depending on your ISP, the hardware, and the protocols involved, this may not be an option for you. B) Disable NAT on the wireless router. This allows it to be a simple switch and wireless access point. The price is that you're probably relying on the DHCP server in the wireless router for your wireless devices and you'll have to disable the DHCP when you disable NAT. This creates new problems to be solved. C) Plug the FreeBSD box into the ADSL router, skipping the wireless router. Your wireless devices will still be double-NATted, but if you're not running servers on them, you might be able to live with that. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"