On Dec 11, 2003, at 5:32 PM, Alex (ander Sendzimir) wrote:
When I issue the command
shutdown -p now
the system shuts down normally. However, I have to manually turn the
power off. Does anyone know how to get the system to turn power off? I
have wake-on-lan working. So, this is the other end of
On Thu, 11 Dec 2003 17:42:48 -0500, Charles Swiger wrote:
# Power management support (see LINT for more options)
device apm0at nexus? disable flags 0x20 # Advanced Power
Management
...to enable and rebuild your kernel.
I don't know about 5.x, but in 4.x you also need
Yup. I've recompiled my kernel with device apm0 and added
appropriately to rc.conf. So, far no luck. Perhaps the motherboard
doesn't support it. I need to track down the board's manual.
Thanks,
Alex
On Thursday, December 11, 2003, at 06:25 PM, Tijl Coosemans wrote:
On Thu, 11 Dec 2003
I couldn't get this to work with my mobo(not the same brand) on 4.x as
well. Now that I've upgraded to 5.1 it's working with no problems.
crr
--- Alex [EMAIL PROTECTED] wrote:
Yup. I've recompiled my kernel with device apm0 and added
appropriately to rc.conf. So, far no luck. Perhaps the
- Original Message -
From: Alex (ander Sendzimir) [EMAIL PROTECTED]
To: Tijl Coosemans [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Friday, December 12, 2003 12:50 AM
Subject: Re: Powering off after shutdown...
# Power management support (see LINT for more options)
device
I have an Intel MS440GX motherboard and I can't find
any information on
the net regarding its soft power off feature which I
believe it has (I could be wrong).
I'm not sure what mine is, but it's from a Dell, and
all I really know about it, is it's an Intell too,
with Wake-on-LAN.
shutdown -p
Okay. I'll try again.
Alex
On Thursday, December 11, 2003, at 07:45 PM, Mark wrote:
- Original Message -
From: Alex (ander Sendzimir) [EMAIL PROTECTED]
To: Tijl Coosemans [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Friday, December 12, 2003 12:50 AM
Subject: Re: Powering off after
