Re: usb scanner
On Tue, 4 Mar 2008, Wojciech Puchar wrote: tried plustek opticpro st12 got: ugen0: vendor 0x07b3 product 0x0600, rev 1.10/0.00, addr 2 ugen0: setting configuration index 0 failed device_attach: ugen0 attach returned 6 ugen0: at uhub0 port 1 (addr 2) disconnected and even /dev/ugen* doesn't exist so sane-find-scanner is unable to find anything Usually that means the USB vendor and product IDs need to be added to uscanner.c (/usr/src/sys/dev/usb). Scanners that require a firmware download may be different. There are two variants of the ST12, and unfortunately, the 0x0600 version is not currently supported by SANE: http://www.sane-project.org/unsupported/plustek-opticpro-st12.html http://www.meier-geinitz.de/sane/gt68xx-backend/ -Warren Block * Rapid City, South Dakota USA ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: usb scanner
Wojciech Puchar wrote: tried plustek opticpro st12 got: ugen0: vendor 0x07b3 product 0x0600, rev 1.10/0.00, addr 2 ugen0: setting configuration index 0 failed device_attach: ugen0 attach returned 6 ugen0: at uhub0 port 1 (addr 2) disconnected and even /dev/ugen* doesn't exist so sane-find-scanner is unable to find anything FreeBSD usually uses /dev/uscanner0 as a device node for scanners (and driver uscanner)unless you are using HPLIP driver. It is true though that in OpenBSD some scanners has to be seen as /dev/ugen0 since uscanner driver for OpenBSD does not support receiving vendor name and product. Are you sure you have right permissions? Also for plustek backend you have to add your-self into _saned group. Did you reboot (I hope not server:- the thing after you plug the scanner What is the output of sane-find-scanner ? Which version of SANE-backends do you have. They came up 2 weeks ago with 1.19 release which I use on 4.3 beta OpenBSD but on my FreeBSD machines the version is 1.17. Did you check if the scanner is listed in the sane data base. Cheers, Predrag ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: usb scanner
Usually that means the USB vendor and product IDs need to be added to uscanner.c (/usr/src/sys/dev/usb). Scanners that require a firmware download may be different. thank you very much i will test it There are two variants of the ST12, and unfortunately, the 0x0600 version is not currently supported by SANE: http://www.sane-project.org/unsupported/plustek-opticpro-st12.html http://www.meier-geinitz.de/sane/gt68xx-backend/ -Warren Block * Rapid City, South Dakota USA ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: usb scanner
ugen0: setting configuration index 0 failed device_attach: ugen0 attach returned 6 ugen0: at uhub0 port 1 (addr 2) disconnected and even /dev/ugen* doesn't exist so sane-find-scanner is unable to find anything FreeBSD usually uses /dev/uscanner0 as a device node for scanners (and driver uscanner)unless you are using HPLIP driver. It is true though that in OpenBSD some scanners has to be seen as /dev/ugen0 since uscanner driver for OpenBSD does not support receiving vendor name and product. this device is not detected as uscanner, and attaching ugen fails - no /dev/.. for it exist. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: USB scanner
On Sat, Aug 14, 2004 at 01:32:17PM +0400, Fractal wrote: Does uscanner driver on FreeBSD 4.8-stable support USB 2.0 interface? It seems that my scanner (EPSON Perfection 2400) does not work at maximum speed. Besides this, it becomes inaccessible via scanimage (sane-find-scanner also cannot find it) in several time interval after system startup if it was not used during this time, and to work with it again it's necessary to completely restart computer. 4.8-STABLE is a bit old, could you try on a 4.10 please? Marc ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: usb scanner won't work
On Tue, 14 Jan 2003 20:19:33 -0700 (MST) Warren Block [EMAIL PROTECTED] wrote: On Mon, 13 Jan 2003, chip wiegand wrote: Okay, I've checked the previous messages on the subject in the archives, still doesn't work. The handbook apparently has no info on setting up flat-bed scanners. There's nothing in the FAQ or other documents part of freebsd.org. I did read the xsane man page. I'm still stuck. Is there a tutorial of other doc available somewhere? My scanner - Umax 1220usb. My kernel does load uhci on boot up, usb does work, my usb mouse works. I installed xsane, backends and frontends. I edited umax1220u.conf like this: # Options for the umax1220u backend # Autodetect the UMAX Astra 1220U #usb 0x1606 0x0010 usb 0x03F0 0x0605 Does this apply to FreeBSD? Yes # The following line enables autodetection for the # Astra 2000U. However, this driver isn't entirely # compatible, so expect color problems :) #usb 0x1606 0x0030 # device list for non-linux-systems (enable if autodetect fails): #/dev/scanner /dev/uscanner0 For my (working) Epson, I have usb /dev/uscanner0 Well, I'll give it a try... -- Chip -Warren Block * Rapid City, South Dakota USA To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
