Teletronics wlan 200mW card supported under 5.x?
Has anyone got the Teletronics XI-325HP 200mW PRISM 2.5-based PCMCIA card to work under freebsd 5.4, which I currently run? or 6.x? The Teletronics XI-325HP 200mW PRISM 2.5-based PCMCIA card is high on my list of possible cards with external antenna jacks to buy. Older reports say they had to flash firmware back to 1.5.6 on the card to get it working under Freebsd 4.x. Current firmware as sold now appears to be 1.8.4 or higher. Seems like a big jump backwards to take. Thanks. -- Gordon Pedersen [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Teletronics wlan 200mW card supported under 5.x?
On 10/16/06, Gordon Pedersen [EMAIL PROTECTED] wrote: Has anyone got the Teletronics XI-325HP 200mW PRISM 2.5-based PCMCIA card to work under freebsd 5.4, which I currently run? or 6.x? The Teletronics XI-325HP 200mW PRISM 2.5-based PCMCIA card is high on my list of possible cards with external antenna jacks to buy. Older reports say they had to flash firmware back to 1.5.6 on the card to get it working under Freebsd 4.x. Current firmware as sold now appears to be 1.8.4 or higher. Seems like a big jump backwards to take. Thats a rebranded zcom card, should have RP-MMCX antenna connector. It depend what you want to do with the card?, IIRC secondary firmware 1.8.4 / primary 1.1.1 doesn't support hostap mode... IIRC you'll have to reflash it with secondary 1.7.4 ~ 1.4.9 (I forget which is best) to get hostap mode working. I have all the firmware, utilites, and docs if you need them. Secondary firmware 1.7.4 and up supports WPA and 1.3.7 and up supports Prism 3 chipsets. I forget which firmwares supports 802.11d but I know 1.8.4 does. I think I have the secondary firmware changelog up to 1.4.9, primary firmware changelog up to 1.1.0 and a 2003 version of the driver programmers manual. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Teletronics wlan 200mW card supported under 5.x?
On Mon, Oct 16, 2006 at 03:34:55PM -0500, Nikolas Britton wrote: On 10/16/06, Gordon Pedersen [EMAIL PROTECTED] wrote: Has anyone got the Teletronics XI-325HP 200mW PRISM 2.5-based PCMCIA card to work under freebsd 5.4, which I currently run? or 6.x? Older reports say they had to flash firmware back to 1.5.6 on the card to get it working under Freebsd 4.x. Current firmware as sold now appears to be 1.8.4 or higher. Seems like a big jump backwards to take. Thats a rebranded zcom card, should have RP-MMCX antenna connector. It Yes, has RP-MMCX exposed after you remove the internal antenna piece, according to my info. depend what you want to do with the card?, IIRC secondary firmware I want to use it in laptop as client, not as AP. I like it due to good sensitivity vs cost. ... Secondary firmware 1.7.4 and up supports WPA and Would want WPA, wonder if 1.7.4 will work under freebsd 6.x? ... forget which firmwares supports 802.11d but I know 1.8.4 does. I think I have the secondary So I wonder where 802.11d is needed? For instance, anywhere in Europe or Latin America or China? -- Gordon Pedersen [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
