Re: Wireless(if_wi): supported card attachment problems
Just to clarify about my messages. I didn't intend to spam the list,there was a problem a problem with our mail-server. At first ,after the registation, I sent the first message, since I didn't see the message on the list i though about a problem with my mail client so i fixed it and tried again. But , again, I couldn't see my message so I began to trouble-shoot mail server. It turned out to be a problem about reverse-resolution of our IP addresses there was not reverse-resolution:( In fact it seems that the MailServer at FreeBSD.org is a little bit 'susceptible' about that while other aren't. So I fixed it, I waited a day and sent the message again and again it didn't work. Now the problem was about the hostname sent in the 'HELO' ,our mail server sent the 'internal' hostname, that , of course, isn't resolved by our external DNS ... I know this is a configuration problem of our mailserver but I couldn't help it since I'm not the mail administrator of my provider,so I tricked our external DNS to resolve also some internal names.. And finally it worked... but I didn't know that my previuos messages were queued.. and as soon as the service became available they were sent. :( So, i didn't send many times the same message on pourpose ... it was not intended, neverthless I regret my mistake, and apologize to anyone who feels offended by that. Sorry.It won't happen again. P.S. I apologize also for my bad english... To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-questions" in the body of the message
Wireless(if_wi): supported card attachment problems
Hi All! I bought a card that, according to the man page of wi driver, should have been supported. The card is a Sohoware/NCP 130 and this is the output of 'man wi': The following cards are among those supported by the wi driver: Card Chip Bus .. .. NANOSPEED ROOT-RZ2000Prism-II PCMCIA --> NDC/Sohoware NCP130 Prism-II PCI <-- NEC CMZ-RT-WPPrism-II PCMCIA ... But the driver simply doesn't see it... This is the output of pciconf : none2@pci0:8:0: class=0x028000 card=0x013115e8 chip=0x013115e8 rev=0x01 hdr=0x00 vendor = 'National Datacomm Corp.' device = 'Prism II InstantWave HR PCI card' class= network I modified the driver sources and i added my card among those supported: static struct { unsigned int vendor,device; int bus_type; char *desc; } pci_ids[] = { /* Sorted by description */ {0x10b7, 0x7770, WI_BUS_PCI_PLX, "3Com Airconnect"}, {0x16ab, 0x1101, WI_BUS_PCI_PLX, "GLPRISM2 WaveLAN"}, {0x1260, 0x3873, WI_BUS_PCI_NATIVE, "Intersil Prism2.5"}, {0x16ab, 0x1102, WI_BUS_PCI_PLX, "Linksys WDT11"}, {0x1385, 0x4100, WI_BUS_PCI_PLX, "Netgear MA301"}, {0x1638, 0x1100, WI_BUS_PCI_PLX, "PRISM2STA WaveLAN"}, --> {0x15E8, 0x0131, WI_BUS_PCI_PLX, "Prism II InstantWave HR PCI card"} and in this flavour --> {0x15E8, 0x0131, WI_BUS_PCI_NATIVE, "Prism II InstantWave HR PCI card"} Because I didnt know if the card was PLX based or not. Now I get the following messages: wi0: port 0xdc00-0xdc3f,0xd800-0xd80f irq 11 at device 8.0 on pci0 wi0: No Mem space on prism2.5? device_probe_and_attach: wi0 attach returned 6 or wi0: port 0xdc00-0xdc3f,0xd800-0xd80f irq 11 at device 8.0 on pci0 wi0: No I/O space?! device_probe_and_attach: wi0 attach returned 6 Using the WI_BUS_PCI_PLX. I have a FreeBSD 4.7 system with no other cards except for the NCP130. Does anyone have some ideas? Thanks! To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-questions" in the body of the message
Appropriate use of FreeBSD mailing lists (was: Wireless(if_wi): supported card attachment problems)
On Saturday, 8 February 2003 at 14:01:17 +0100, Andrea Franceschini wrote: > Hi All! > > I bought a card that, according to the man page of wi driver, should have been >supported. > The card is a Sohoware/NCP 130 and this is the output of 'man wi': On Saturday, 8 February 2003 at 14:01:34 +0100, Andrea Franceschini wrote: > Hi All! > > I bought a card that, according to the man page of wi driver, should have been >supported. > The card is a Sohoware/NCP 130 and this is the output of 'man wi': On Sunday, 9 February 2003 at 14:18:45 +0100, Andrea Franceschini wrote: > Hi All! > > I bought a card that, according to the man page of wi driver, should have been >supported. > The card is a Sohoware/NCP 130 and this is the output of 'man wi': On Sunday, 9 February 2003 at 14:20:25 +0100, Andrea Franceschini wrote: > Hi All! > > I bought a card that, according to the man page of wi driver, should have been >supported. > The card is a Sohoware/NCP 130 and this is the output of 'man wi': On Sunday, 9 February 2003 at 14:20:50 +0100, Andrea Franceschini wrote: > Hi All! > > I bought a card that, according to the man page of wi driver, should have been >supported. > The card is a Sohoware/NCP 130 and this is the output of 'man wi': On Sunday, 9 February 2003 at 14:28:29 +0100, Andrea Franceschini wrote: > Just a test. On Sunday, 9 February 2003 at 14:41:03 +0100, Andrea Franceschini wrote: > Just a test. On Sunday, 9 February 2003 at 15:40:19 +0100, Andrea Franceschini wrote: > Hi All! > > I bought a card that, according to the man page of wi driver, should have been >supported. > The card is a Sohoware/NCP 130 and this is the output of 'man wi': Please do not send messages more than once. Please also don't post separate messages to different mailing lists (this message was sent to FreeBSD-hardware as well, where it is off topic). Please also do not send "test" messages to FreeBSD-questions. Use FreeBSD-test for that purpose. There are thousands of people on FreeBSD-questions. Each of these messages gets delivered to each of them. The result is that you will annoy people and lower your chances of getting a useful reply. Greg -- When replying to this message, please copy the original recipients. If you don't, I may ignore the reply or reply to the original recipients. For more information, see http://www.lemis.com/questions.html See complete headers for address and phone numbers msg18651/pgp0.pgp Description: PGP signature
Wireless(if_wi): supported card attachment problems
Hi All! I bought a card that, according to the man page of wi driver, should have been supported. The card is a Sohoware/NCP 130 and this is the output of 'man wi': The following cards are among those supported by the wi driver: Card Chip Bus .. .. NANOSPEED ROOT-RZ2000Prism-II PCMCIA --> NDC/Sohoware NCP130 Prism-II PCI <-- NEC CMZ-RT-WPPrism-II PCMCIA ... But the driver simply doesn't see it... This is the output of pciconf : none2@pci0:8:0: class=0x028000 card=0x013115e8 chip=0x013115e8 rev=0x01 hdr=0x00 vendor = 'National Datacomm Corp.' device = 'Prism II InstantWave HR PCI card' class= network I modified the driver sources and i added my card among those supported: static struct { unsigned int vendor,device; int bus_type; char *desc; } pci_ids[] = { /* Sorted by description */ {0x10b7, 0x7770, WI_BUS_PCI_PLX, "3Com Airconnect"}, {0x16ab, 0x1101, WI_BUS_PCI_PLX, "GLPRISM2 WaveLAN"}, {0x1260, 0x3873, WI_BUS_PCI_NATIVE, "Intersil Prism2.5"}, {0x16ab, 0x1102, WI_BUS_PCI_PLX, "Linksys WDT11"}, {0x1385, 0x4100, WI_BUS_PCI_PLX, "Netgear MA301"}, {0x1638, 0x1100, WI_BUS_PCI_PLX, "PRISM2STA WaveLAN"}, --> {0x15E8, 0x0131, WI_BUS_PCI_PLX, "Prism II InstantWave HR PCI card"} and in this flavour --> {0x15E8, 0x0131, WI_BUS_PCI_NATIVE, "Prism II InstantWave HR PCI card"} Because I didnt know if the card was PLX based or not. Now I get the following messages: wi0: port 0xdc00-0xdc3f,0xd800-0xd80f irq 11 at device 8.0 on pci0 wi0: No Mem space on prism2.5? device_probe_and_attach: wi0 attach returned 6 or wi0: port 0xdc00-0xdc3f,0xd800-0xd80f irq 11 at device 8.0 on pci0 wi0: No I/O space?! device_probe_and_attach: wi0 attach returned 6 Using the WI_BUS_PCI_PLX. I have a FreeBSD 4.7 system with no other cards except for the NCP130. Does anyone have some ideas? Thanks! To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-questions" in the body of the message
Wireless(if_wi): supported card attachment problems
Hi All! I bought a card that, according to the man page of wi driver, should have been supported. The card is a Sohoware/NCP 130 and this is the output of 'man wi': The following cards are among those supported by the wi driver: Card Chip Bus .. .. NANOSPEED ROOT-RZ2000Prism-II PCMCIA --> NDC/Sohoware NCP130 Prism-II PCI <-- NEC CMZ-RT-WPPrism-II PCMCIA ... But the driver simply doesn't see it... This is the output of pciconf : none2@pci0:8:0: class=0x028000 card=0x013115e8 chip=0x013115e8 rev=0x01 hdr=0x00 vendor = 'National Datacomm Corp.' device = 'Prism II InstantWave HR PCI card' class= network I modified the driver sources and i added my card among those supported: static struct { unsigned int vendor,device; int bus_type; char *desc; } pci_ids[] = { /* Sorted by description */ {0x10b7, 0x7770, WI_BUS_PCI_PLX, "3Com Airconnect"}, {0x16ab, 0x1101, WI_BUS_PCI_PLX, "GLPRISM2 WaveLAN"}, {0x1260, 0x3873, WI_BUS_PCI_NATIVE, "Intersil Prism2.5"}, {0x16ab, 0x1102, WI_BUS_PCI_PLX, "Linksys WDT11"}, {0x1385, 0x4100, WI_BUS_PCI_PLX, "Netgear MA301"}, {0x1638, 0x1100, WI_BUS_PCI_PLX, "PRISM2STA WaveLAN"}, --> {0x15E8, 0x0131, WI_BUS_PCI_PLX, "Prism II InstantWave HR PCI card"} and in this flavour --> {0x15E8, 0x0131, WI_BUS_PCI_NATIVE, "Prism II InstantWave HR PCI card"} Because I didnt know if the card was PLX based or not. Now I get the following messages: wi0: port 0xdc00-0xdc3f,0xd800-0xd80f irq 11 at device 8.0 on pci0 wi0: No Mem space on prism2.5? device_probe_and_attach: wi0 attach returned 6 or wi0: port 0xdc00-0xdc3f,0xd800-0xd80f irq 11 at device 8.0 on pci0 wi0: No I/O space?! device_probe_and_attach: wi0 attach returned 6 Using the WI_BUS_PCI_PLX. I have a FreeBSD 4.7 system with no other cards except for the NCP130. Does anyone have some ideas? Thanks! To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-questions" in the body of the message
Wireless(if_wi): supported card attachment problems
Hi All! I bought a card that, according to the man page of wi driver, should have been supported. The card is a Sohoware/NCP 130 and this is the output of 'man wi': The following cards are among those supported by the wi driver: Card Chip Bus .. .. NANOSPEED ROOT-RZ2000Prism-II PCMCIA --> NDC/Sohoware NCP130 Prism-II PCI <-- NEC CMZ-RT-WPPrism-II PCMCIA ... But the driver simply doesn't see it... This is the output of pciconf : none2@pci0:8:0: class=0x028000 card=0x013115e8 chip=0x013115e8 rev=0x01 hdr=0x00 vendor = 'National Datacomm Corp.' device = 'Prism II InstantWave HR PCI card' class= network I modified the driver sources and i added my card among those supported: static struct { unsigned int vendor,device; int bus_type; char *desc; } pci_ids[] = { /* Sorted by description */ {0x10b7, 0x7770, WI_BUS_PCI_PLX, "3Com Airconnect"}, {0x16ab, 0x1101, WI_BUS_PCI_PLX, "GLPRISM2 WaveLAN"}, {0x1260, 0x3873, WI_BUS_PCI_NATIVE, "Intersil Prism2.5"}, {0x16ab, 0x1102, WI_BUS_PCI_PLX, "Linksys WDT11"}, {0x1385, 0x4100, WI_BUS_PCI_PLX, "Netgear MA301"}, {0x1638, 0x1100, WI_BUS_PCI_PLX, "PRISM2STA WaveLAN"}, --> {0x15E8, 0x0131, WI_BUS_PCI_PLX, "Prism II InstantWave HR PCI card"} and in this flavour --> {0x15E8, 0x0131, WI_BUS_PCI_NATIVE, "Prism II InstantWave HR PCI card"} Because I didnt know if the card was PLX based or not. Now I get the following messages: wi0: port 0xdc00-0xdc3f,0xd800-0xd80f irq 11 at device 8.0 on pci0 wi0: No Mem space on prism2.5? device_probe_and_attach: wi0 attach returned 6 or wi0: port 0xdc00-0xdc3f,0xd800-0xd80f irq 11 at device 8.0 on pci0 wi0: No I/O space?! device_probe_and_attach: wi0 attach returned 6 Using the WI_BUS_PCI_PLX. I have a FreeBSD 4.7 system with no other cards except for the NCP130. Does anyone have some ideas? Thanks! To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-questions" in the body of the message
Wireless(if_wi): supported card attachment problems
Hi All! I bought a card that, according to the man page of wi driver, should have been supported. The card is a Sohoware/NCP 130 and this is the output of 'man wi': The following cards are among those supported by the wi driver: Card Chip Bus .. .. NANOSPEED ROOT-RZ2000Prism-II PCMCIA --> NDC/Sohoware NCP130 Prism-II PCI <-- NEC CMZ-RT-WPPrism-II PCMCIA ... But the driver simply doesn't see it... This is the output of pciconf : none2@pci0:8:0: class=0x028000 card=0x013115e8 chip=0x013115e8 rev=0x01 hdr=0x00 vendor = 'National Datacomm Corp.' device = 'Prism II InstantWave HR PCI card' class= network I modified the driver sources and i added my card among those supported: static struct { unsigned int vendor,device; int bus_type; char *desc; } pci_ids[] = { /* Sorted by description */ {0x10b7, 0x7770, WI_BUS_PCI_PLX, "3Com Airconnect"}, {0x16ab, 0x1101, WI_BUS_PCI_PLX, "GLPRISM2 WaveLAN"}, {0x1260, 0x3873, WI_BUS_PCI_NATIVE, "Intersil Prism2.5"}, {0x16ab, 0x1102, WI_BUS_PCI_PLX, "Linksys WDT11"}, {0x1385, 0x4100, WI_BUS_PCI_PLX, "Netgear MA301"}, {0x1638, 0x1100, WI_BUS_PCI_PLX, "PRISM2STA WaveLAN"}, --> {0x15E8, 0x0131, WI_BUS_PCI_PLX, "Prism II InstantWave HR PCI card"} and in this flavour --> {0x15E8, 0x0131, WI_BUS_PCI_NATIVE, "Prism II InstantWave HR PCI card"} Because I didnt know if the card was PLX based or not. Now I get the following messages: wi0: port 0xdc00-0xdc3f,0xd800-0xd80f irq 11 at device 8.0 on pci0 wi0: No Mem space on prism2.5? device_probe_and_attach: wi0 attach returned 6 or wi0: port 0xdc00-0xdc3f,0xd800-0xd80f irq 11 at device 8.0 on pci0 wi0: No I/O space?! device_probe_and_attach: wi0 attach returned 6 Using the WI_BUS_PCI_PLX. I have a FreeBSD 4.7 system with no other cards except for the NCP130. Does anyone have some ideas? Thanks! To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-questions" in the body of the message
Wireless(if_wi): supported card attachment problems
Hi All! I bought a card that, according to the man page of wi driver, should have been supported. The card is a Sohoware/NCP 130 and this is the output of 'man wi': The following cards are among those supported by the wi driver: Card Chip Bus .. .. NANOSPEED ROOT-RZ2000Prism-II PCMCIA --> NDC/Sohoware NCP130 Prism-II PCI <-- NEC CMZ-RT-WPPrism-II PCMCIA ... But the driver simply doesn't see it... This is the output of pciconf : none2@pci0:8:0: class=0x028000 card=0x013115e8 chip=0x013115e8 rev=0x01 hdr=0x00 vendor = 'National Datacomm Corp.' device = 'Prism II InstantWave HR PCI card' class= network I modified the driver sources and i added my card among those supported: static struct { unsigned int vendor,device; int bus_type; char *desc; } pci_ids[] = { /* Sorted by description */ {0x10b7, 0x7770, WI_BUS_PCI_PLX, "3Com Airconnect"}, {0x16ab, 0x1101, WI_BUS_PCI_PLX, "GLPRISM2 WaveLAN"}, {0x1260, 0x3873, WI_BUS_PCI_NATIVE, "Intersil Prism2.5"}, {0x16ab, 0x1102, WI_BUS_PCI_PLX, "Linksys WDT11"}, {0x1385, 0x4100, WI_BUS_PCI_PLX, "Netgear MA301"}, {0x1638, 0x1100, WI_BUS_PCI_PLX, "PRISM2STA WaveLAN"}, --> {0x15E8, 0x0131, WI_BUS_PCI_PLX, "Prism II InstantWave HR PCI card"} and in this flavour --> {0x15E8, 0x0131, WI_BUS_PCI_NATIVE, "Prism II InstantWave HR PCI card"} Because I didnt know if the card was PLX based or not. Now I get the following messages: wi0: port 0xdc00-0xdc3f,0xd800-0xd80f irq 11 at device 8.0 on pci0 wi0: No Mem space on prism2.5? device_probe_and_attach: wi0 attach returned 6 or wi0: port 0xdc00-0xdc3f,0xd800-0xd80f irq 11 at device 8.0 on pci0 wi0: No I/O space?! device_probe_and_attach: wi0 attach returned 6 Using the WI_BUS_PCI_PLX. I have a FreeBSD 4.7 system with no other cards except for the NCP130. Does anyone have some ideas? Thanks! To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-questions" in the body of the message