At 2003-10-15T04:28:58Z, Constantine <[EMAIL PROTECTED]> writes:
> Why to this file and not to /etc/sysctl.conf? I have no monitor on that
> box, so I want to make sure it is more likely to work after the
> reboot. :-)
That's a read-only sysctl knob, so you can't adjust it once the system has
boo
On Wednesday 15 October 2003 01:46 am, Mike Maltese wrote:
> > acd0: DVDROM at ata1-master UDMA66
>
> I stand corrected, although I maintain that no optical drive is
> capable of that kind of throughput. =) I was kinda wondering if he'd
> been duped on the specs of the drive.
>
Neither are the HD
> acd0: DVDROM at ata1-master UDMA66
I stand corrected, although I maintain that no optical drive is capable of
that kind of throughput. =) I was kinda wondering if he'd been duped on the
specs of the drive.
Thanks, Mike
___
[EMAIL PROTECTED] mailing
On Tuesday 14 October 2003 10:04 pm, Mike Maltese wrote:
> > Why to this file and not to /etc/sysctl.conf? I have no monitor on
> > that box, so I want to make sure it is more likely to work after
> > the reboot.
> >
> :-)
>
> I can't remember exactly why, but trust me, it will work.
>
> > But why
>> Add the following to /boot/loader.conf:
>> hw.ata.atapi_dma="1"
> Why to this file and not to /etc/sysctl.conf? I have no monitor on that
> box, so I want to make sure it is more likely to work after the reboot.
loader.conf(5) is the system bootstrap configuration file (third step)
and is read
> Why to this file and not to /etc/sysctl.conf? I have no monitor on that
> box, so I want to make sure it is more likely to work after the reboot.
:-)
I can't remember exactly why, but trust me, it will work.
> But why does it sets it to UDMA33, but not to UDMA66?
Have you actually tried it ye
On 2003-10-15 00:20, Mike Maltese wrote:
Second, where do I have to indicate that my DVD-ROM supports UDMA66? I
assume that after saying "atacontrol mode 1 udma66 udma66", the settings
are going to be vanished the next reboot.
Add the following to /boot/loader.conf:
hw.ata.atapi_dma="1"
R
> Second, where do I have to indicate that my DVD-ROM supports UDMA66? I
> assume that after saying "atacontrol mode 1 udma66 udma66", the settings
> are going to be vanished the next reboot.
Add the following to /boot/loader.conf:
hw.ata.atapi_dma="1"
Reboot. Check dmesg.
> Third, why it doe
Hello,
I have a few questions about atacontrol.
First, why the option 'enclosure' does not seem to work?
<<
cnst# atacontrol enclosure 0 0
atacontrol: ioctl(ATAENCSTAT): Device not configured
>>
Second, where do I have to indicate that my DVD-ROM supports UDMA66? I
assume that after saying "atac
