has problem
Dear Sir: I learning the freebsd 8.1, I installed many times with 8.1, but the result always you may also user sysinstall(8) the installation and ** what can i do, ? newer just on the load ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: has problem
There is installation information on freebsdchina.org which may assist you. 去freebsdchina.org上面去看一下，有安装文档的。 On Wed, Feb 16, 2011 at 1:29 PM, zhong song samzhong2...@yahoo.com wrote: Dear Sir: I learning the freebsd 8.1, I installed many times with 8.1, but the result always you may also user sysinstall(8) the installation and ** what can i do, ? newer just on the load ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org -- Hugh ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
ahd driver on 4.9 has problem with more than 3 drives
Hello All, I am trying to run FreeBSD 4.9 on a server that has 4x146GB ultra 320 SCSI drives. The motherboard is a Tyan S2720 with an Adaptec 7902 Ultra 320 onboard. (Also tried it with 4x73GB drives). The systems works fine when there are 3 drives in the system. As, soon as I plug in the 4th drive and boot the system in starts to 'dump card state' after the 'waiting for 15 secs for scsi devices to settle' line and never boots up completely. It just repeats dumps card state. I then loaded FreeBSD 5.2.1-REL and even that dumps card state, but it boots up fine. I have included the dmesg in the mail. (Sorry for including everything. I didnt know what might be important). I havent changed anything in the kernel, its a standard install. Does anyone have any clue as to why this could be happening on 4.9. Am I missing some parameter or something here. Or, is it possible to load the 5.2.1 ahd driver on 4.9. If so can somebody give some instructions on how to do that. I would appreciate any kind of help. Please let me know if you want me to do anything else or provide any other information. Thanks -Pranav dmesg output on 5.2.1 Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel /boot/kernel/kernel at 0xc0a35000. Preloaded elf module /boot/kernel/acpi.ko at 0xc0a3526c. ACPI APIC Table: A M I OEMAPIC Timecounter i8254 frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2799.22-MHz 686-class CPU) Origin = GenuineIntel Id = 0xf25 Stepping = 5 Features=0xbfebfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE Hyperthreading: 2 logical CPUs real memory = 4160684032 (3967 MB) avail memory = 4044111872 (3856 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 Version 2.0 irqs 0-23 on motherboard ioapic1 Version 2.0 irqs 24-47 on motherboard ioapic2 Version 2.0 irqs 48-71 on motherboard Pentium Pro MTRR support enabled npx0: [FAST] npx0: math processor on motherboard npx0: INT 16 interface acpi0: A M I OEMRSDT on motherboard pcibios: BIOS version 2.10 Using $PIR table, 14 entries at 0xc00f2fb0 acpi0: Power Button (fixed) Timecounter ACPI-fast frequency 3579545 Hz quality 1000 acpi_timer0: 24-bit timer at 3.579545MHz port 0x408-0x40b on acpi0 acpi_cpu0: CPU on acpi0 acpi_cpu1: CPU on acpi0 acpi_cpu2: CPU on acpi0 device_probe_and_attach: acpi_cpu2 attach returned 6 acpi_cpu2: CPU on acpi0 device_probe_and_attach: acpi_cpu2 attach returned 6 pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0 pci0: ACPI PCI bus on pcib0 pcib1: ACPI PCI-PCI bridge at device 2.0 on pci0 pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P2 - AE_NOT_FOUND pci2: ACPI PCI bus on pcib1 pci2: base peripheral, interrupt controller at device 28.0 (no driver attached) pcib2: ACPI PCI-PCI bridge at device 29.0 on pci2 pci4: ACPI PCI bus on pcib2 em0: Intel(R) PRO/1000 Network Connection, Version - 1.7.19 port 0xc000-0xc03f mem 0xfe98-0xfe99 irq 48 at device 1.0 on pci4 em0: Speed:N/A Duplex:N/A em1: Intel(R) PRO/1000 Network Connection, Version - 1.7.19 port 0xc400-0xc43f mem 0xfe9c-0xfe9d irq 53 at device 1.1 on pci4 em1: Speed:N/A Duplex:N/A ahd0: Adaptec AIC7902 Ultra320 SCSI adapter port 0xc800-0xc8ff,0xd000-0xd0ff mem 0xfe9fc000-0xfe9fdfff irq 50 at device 4.0 on pci4 aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs ahd1: Adaptec AIC7902 Ultra320 SCSI adapter port 0xd400-0xd4ff,0xd800-0xd8ff mem 0xfe9fe000-0xfe9f irq 51 at device 4.1 on pci4 aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs pci2: base peripheral, interrupt controller at device 30.0 (no driver attached) pcib3: ACPI PCI-PCI bridge at device 31.0 on pci2 pci3: ACPI PCI bus on pcib3 uhci0: Intel 82801CA/CAM (ICH3) USB controller USB-A port 0xe800-0xe81f irq 16 at device 29.0 on pci0 usb0: Intel 82801CA/CAM (ICH3) USB controller USB-A on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pcib4: ACPI PCI-PCI bridge at device 30.0 on pci0 pci1: ACPI PCI bus on pcib4 pci1: display, VGA at device 2.0 (no driver attached) fxp0: Intel 82551 Pro/100 Ethernet port 0xa400-0xa43f mem 0xfe4a-0xfe4b,0xfe4fe000-0xfe4fefff irq 17 at device 3.0 on pci1 fxp0: Ethernet address 00:e0:81:27:ce:99 miibus0: MII bus on fxp0 inphy0: i82555 10/100 media interface on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: PCI-ISA bridge at device 31.0 on pci0 isa0: ISA bus on isab0 atapci0: Intel ICH3 UDMA100 controller port 0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0x7
Re: ahd driver on 4.9 has problem with more than 3 drives (update)
When I boot the machine with the -v option it boots up completely. I can provide you with the dmesg if needed. So, what do you think could be reason for that? is it stable enough to run as a production server. -Pranav On Tue, 20 Jul 2004 06:28:23 -0700 (PDT), Pranav [EMAIL PROTECTED] wrote: Hello All, I am trying to run FreeBSD 4.9 on a server that has 4x146GB ultra 320 SCSI drives. The motherboard is a Tyan S2720 with an Adaptec 7902 Ultra 320 onboard. (Also tried it with 4x73GB drives). The systems works fine when there are 3 drives in the system. As, soon as I plug in the 4th drive and boot the system in starts to 'dump card state' after the 'waiting for 15 secs for scsi devices to settle' line and never boots up completely. It just repeats dumps card state. I then loaded FreeBSD 5.2.1-REL and even that dumps card state, but it boots up fine. I have included the dmesg in the mail. (Sorry for including everything. I didnt know what might be important). I havent changed anything in the kernel, its a standard install. Does anyone have any clue as to why this could be happening on 4.9. Am I missing some parameter or something here. Or, is it possible to load the 5.2.1 ahd driver on 4.9. If so can somebody give some instructions on how to do that. I would appreciate any kind of help. Please let me know if you want me to do anything else or provide any other information. Thanks -Pranav dmesg output on 5.2.1 Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel /boot/kernel/kernel at 0xc0a35000. Preloaded elf module /boot/kernel/acpi.ko at 0xc0a3526c. ACPI APIC Table: A M I OEMAPIC Timecounter i8254 frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2799.22-MHz 686-class CPU) Origin = GenuineIntel Id = 0xf25 Stepping = 5 Features=0xbfebfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE Hyperthreading: 2 logical CPUs real memory = 4160684032 (3967 MB) avail memory = 4044111872 (3856 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 Version 2.0 irqs 0-23 on motherboard ioapic1 Version 2.0 irqs 24-47 on motherboard ioapic2 Version 2.0 irqs 48-71 on motherboard Pentium Pro MTRR support enabled npx0: [FAST] npx0: math processor on motherboard npx0: INT 16 interface acpi0: A M I OEMRSDT on motherboard pcibios: BIOS version 2.10 Using $PIR table, 14 entries at 0xc00f2fb0 acpi0: Power Button (fixed) Timecounter ACPI-fast frequency 3579545 Hz quality 1000 acpi_timer0: 24-bit timer at 3.579545MHz port 0x408-0x40b on acpi0 acpi_cpu0: CPU on acpi0 acpi_cpu1: CPU on acpi0 acpi_cpu2: CPU on acpi0 device_probe_and_attach: acpi_cpu2 attach returned 6 acpi_cpu2: CPU on acpi0 device_probe_and_attach: acpi_cpu2 attach returned 6 pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0 pci0: ACPI PCI bus on pcib0 pcib1: ACPI PCI-PCI bridge at device 2.0 on pci0 pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P2 - AE_NOT_FOUND pci2: ACPI PCI bus on pcib1 pci2: base peripheral, interrupt controller at device 28.0 (no driver attached) pcib2: ACPI PCI-PCI bridge at device 29.0 on pci2 pci4: ACPI PCI bus on pcib2 em0: Intel(R) PRO/1000 Network Connection, Version - 1.7.19 port 0xc000-0xc03f mem 0xfe98-0xfe99 irq 48 at device 1.0 on pci4 em0: Speed:N/A Duplex:N/A em1: Intel(R) PRO/1000 Network Connection, Version - 1.7.19 port 0xc400-0xc43f mem 0xfe9c-0xfe9d irq 53 at device 1.1 on pci4 em1: Speed:N/A Duplex:N/A ahd0: Adaptec AIC7902 Ultra320 SCSI adapter port 0xc800-0xc8ff,0xd000-0xd0ff mem 0xfe9fc000-0xfe9fdfff irq 50 at device 4.0 on pci4 aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs ahd1: Adaptec AIC7902 Ultra320 SCSI adapter port 0xd400-0xd4ff,0xd800-0xd8ff mem 0xfe9fe000-0xfe9f irq 51 at device 4.1 on pci4 aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs pci2: base peripheral, interrupt controller at device 30.0 (no driver attached) pcib3: ACPI PCI-PCI bridge at device 31.0 on pci2 pci3: ACPI PCI bus on pcib3 uhci0: Intel 82801CA/CAM (ICH3) USB controller USB-A port 0xe800-0xe81f irq 16 at device 29.0 on pci0 usb0: Intel 82801CA/CAM (ICH3) USB controller USB-A on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pcib4: ACPI PCI-PCI bridge at device 30.0 on pci0 pci1: ACPI PCI bus on pcib4 pci1: display, VGA at device 2.0 (no driver attached) fxp0: Intel 82551
ahd driver on 4.9 has problem with more than 3 drives (update)
I have an update on the problem. When I boot the machine with the -v option it boots up completely. It does dump card state and give a few other messages, but it boots up completely unlike before wherei t used to just dump card state repeatedly. I can provide you with the dmesg if needed. What do you think could be reason for that? is it stable enough to run like this (with the -v option and with those error messages) as a production server. -Pranav __ Do you Yahoo!? Vote for the stars of Yahoo!'s next ad campaign! http://advision.webevents.yahoo.com/yahoo/votelifeengine/ ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
ahd driver on 4.9 has problem with more than 3 drives.
Hello All, I am trying to run FreeBSD 4.9 on a server that has 4x146GB ultra 320 SCSI drives. The motherboard is a Tyan S2720 with an Adaptec 7902 Ultra 320 onboard. (Also tried it with 4x73GB drives). The systems works fine when there are 3 drives in the system. As, soon as I plug in the 4th drive and boot the system in starts to 'dump card state' after the 'waiting for 15 secs for scsi devices to settle' line and never boots up completely. It just repeats dumps card state. I then loaded FreeBSD 5.2.1-REL and even that dumps card state, but it boots up fine. I have included the dmesg in the mail. (Sorry for including everything. I didnt know what might be important). I havent changed anything in the kernel, its a standard install. Does anyone have any clue as to why this could be happening on 4.9. Am I missing some parameter or something here. Or, is it possible to load the 5.2.1 ahd driver on 4.9. If so can somebody give some instructions on how to do that. I would appreciate any kind of help. Please let me know if you want me to do anything else or provide any other information. Thanks -Pranav dmesg output on 5.2.1 Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel /boot/kernel/kernel at 0xc0a35000. Preloaded elf module /boot/kernel/acpi.ko at 0xc0a3526c. ACPI APIC Table: A M I OEMAPIC Timecounter i8254 frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2799.22-MHz 686-class CPU) Origin = GenuineIntel Id = 0xf25 Stepping = 5 Features=0xbfebfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE Hyperthreading: 2 logical CPUs real memory = 4160684032 (3967 MB) avail memory = 4044111872 (3856 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 Version 2.0 irqs 0-23 on motherboard ioapic1 Version 2.0 irqs 24-47 on motherboard ioapic2 Version 2.0 irqs 48-71 on motherboard Pentium Pro MTRR support enabled npx0: [FAST] npx0: math processor on motherboard npx0: INT 16 interface acpi0: A M I OEMRSDT on motherboard pcibios: BIOS version 2.10 Using $PIR table, 14 entries at 0xc00f2fb0 acpi0: Power Button (fixed) Timecounter ACPI-fast frequency 3579545 Hz quality 1000 acpi_timer0: 24-bit timer at 3.579545MHz port 0x408-0x40b on acpi0 acpi_cpu0: CPU on acpi0 acpi_cpu1: CPU on acpi0 acpi_cpu2: CPU on acpi0 device_probe_and_attach: acpi_cpu2 attach returned 6 acpi_cpu2: CPU on acpi0 device_probe_and_attach: acpi_cpu2 attach returned 6 pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0 pci0: ACPI PCI bus on pcib0 pcib1: ACPI PCI-PCI bridge at device 2.0 on pci0 pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P2 - AE_NOT_FOUND pci2: ACPI PCI bus on pcib1 pci2: base peripheral, interrupt controller at device 28.0 (no driver attached) pcib2: ACPI PCI-PCI bridge at device 29.0 on pci2 pci4: ACPI PCI bus on pcib2 em0: Intel(R) PRO/1000 Network Connection, Version - 1.7.19 port 0xc000-0xc03f mem 0xfe98-0xfe99 irq 48 at device 1.0 on pci4 em0: Speed:N/A Duplex:N/A em1: Intel(R) PRO/1000 Network Connection, Version - 1.7.19 port 0xc400-0xc43f mem 0xfe9c-0xfe9d irq 53 at device 1.1 on pci4 em1: Speed:N/A Duplex:N/A ahd0: Adaptec AIC7902 Ultra320 SCSI adapter port 0xc800-0xc8ff,0xd000-0xd0ff mem 0xfe9fc000-0xfe9fdfff irq 50 at device 4.0 on pci4 aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs ahd1: Adaptec AIC7902 Ultra320 SCSI adapter port 0xd400-0xd4ff,0xd800-0xd8ff mem 0xfe9fe000-0xfe9f irq 51 at device 4.1 on pci4 aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs pci2: base peripheral, interrupt controller at device 30.0 (no driver attached) pcib3: ACPI PCI-PCI bridge at device 31.0 on pci2 pci3: ACPI PCI bus on pcib3 uhci0: Intel 82801CA/CAM (ICH3) USB controller USB-A port 0xe800-0xe81f irq 16 at device 29.0 on pci0 usb0: Intel 82801CA/CAM (ICH3) USB controller USB-A on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pcib4: ACPI PCI-PCI bridge at device 30.0 on pci0 pci1: ACPI PCI bus on pcib4 pci1: display, VGA at device 2.0 (no driver attached) fxp0: Intel 82551 Pro/100 Ethernet port 0xa400-0xa43f mem 0xfe4a-0xfe4b,0xfe4fe000-0xfe4fefff irq 17 at device 3.0 on pci1 fxp0: Ethernet address 00:e0:81:27:ce:99 miibus0: MII bus on fxp0 inphy0: i82555 10/100 media interface on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: PCI-ISA bridge at device 31.0 on pci0 isa0: ISA bus on isab0 atapci0: Intel ICH3 UDMA100 controller port
