Re: port net/acx100 for usr5410 pcmcia wireless FBSD 6.3
Is your wireless network a non-authentication one, if it is wpa, wep, you may want to try follow the handbook[1]. I am not using rc.conf to start my wireless, but I think give the ssid in rc.conf may help, because there may be more wireless network in your area if it is a non-authentication one. ifconfig_ath0="ssid your_ssid_here DHCP" After you give the ssid, what the ifconfig output? Does the status change to associate? If yes, you can try: #dhclient ndis0 to get the ip from DHCP. Kemian [1]http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/network-wireless.html On 21/02/2008, Anton Shterenlikht <[EMAIL PROTECTED]> wrote: > > > > > On 19/02/2008, Anton Shterenlikht <[EMAIL PROTECTED]> wrote: > > > > > > Is anybody using usr5410? With what driver? And what version of FBSD? > > > > > > > > > > On Wed, Feb 20, 2008 at 12:21:22PM +, Kemian Dang wrote: > > > > Try ndis, it works for my broadcom wireless adapter. > > > > > > > On 20/02/2008, Anton Shterenlikht <[EMAIL PROTECTED]> wrote: > > > > I added ndis to the kernel and built the kernel module using > > > http://www.linuxant.com/usr11gv40q.zip driver. > > > > > > However, when I load the module: > > > > I get errors. From dmesg: > > > > > > cardbus1: Expecting link target, got 0xed > > > cardbus1: Resource not specified in CIS: id=10, size=2000 > > > cardbus1: Resource not specified in CIS: id=14, size=2 > > > ndis0: mem > 0x8802-0x88021fff,0x8800-0x8801 irq 11 at device 0.0 on cardbus1 > > > ndis0: NDIS API version: 5.1 > > > ndis0: init handler failed > > > device_attach: ndis0 attach returned 6 > > > > > > What am I doing wrong? > > > > > On Wed, Feb 20, 2008 at 04:39:22PM +, Kemian Dang wrote: > > Try add it to the /boot/loader.conf and restart to see whether it works. > > My ndis0 can not get response from "ifconfig ndis0 scan", but I can > > give it the ssid manually and make it work. > > > thanks, it seems to be detected now, from dmesg: > > cardbus1: Expecting link target, got 0xfd > > cardbus1: Resource not specified in CIS: id=10, size=2000 > cardbus1: Resource not specified in CIS: id=14, size=2 > ndis0: mem > 0x8802-0x88021fff, > 0x8800-0x8801 irq 11 at device 0.0 on cardbus1 > ndis0: NDIS API version: 5.1 > > ndis0: Ethernet address: 00:c0:49:a9:22:59 > > I still cannot connect to the wireless network, but this > is probably another problem.. > > # ifconfig ndis0 up scan > SSIDBSSID CHAN RATE S:N INT CAPS > UoB-Wireless00:16:c7:71:9d:631 52M 18:0 100 E > # > > # tail /etc/rc.conf > ifconfig_ndis0="DHCP" > > # /etc/rc.d/netif start > ndis0: no link .. giving up > ndis0: flags=8843 mtu 1500 > ether 00:c0:49:a9:22:59 > media: IEEE 802.11 Wireless Ethernet autoselect > status: no carrier > ssid "" channel 1 > authmode OPEN privacy OFF txpowmax 100 bmiss 7 > # > > I also tried > > # ifconfig ndis0 ssid UoB-Wireless > > but that didn't help. > > I'll try to update the driver version from 4.0q to 6.0b15, but > the latter is not working fine yet. I think it is because I mixed > different versions of inf, sys and firmware. > > many thanks > anton > > > -- > > Anton Shterenlikht > Room 2.6, Queen's Building > Mech Eng Dept > Bristol University > University Walk, Bristol BS8 1TR, UK > Tel: +44 (0)117 928 8233 > Fax: +44 (0)117 929 4423 > ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: port net/acx100 for usr5410 pcmcia wireless FBSD 6.3
> > > > On 19/02/2008, Anton Shterenlikht <[EMAIL PROTECTED]> wrote: > > > > Is anybody using usr5410? With what driver? And what version of FBSD? > > > > > > > On Wed, Feb 20, 2008 at 12:21:22PM +, Kemian Dang wrote: > > > Try ndis, it works for my broadcom wireless adapter. > > > > On 20/02/2008, Anton Shterenlikht <[EMAIL PROTECTED]> wrote: > > I added ndis to the kernel and built the kernel module using > > http://www.linuxant.com/usr11gv40q.zip driver. > > > > However, when I load the module: > > I get errors. From dmesg: > > > > cardbus1: Expecting link target, got 0xed > > cardbus1: Resource not specified in CIS: id=10, size=2000 > > cardbus1: Resource not specified in CIS: id=14, size=2 > > ndis0: mem > > 0x8802-0x88021fff,0x8800-0x8801 irq 11 at device 0.0 on cardbus1 > > ndis0: NDIS API version: 5.1 > > ndis0: init handler failed > > device_attach: ndis0 attach returned 6 > > > > What am I doing wrong? > > On Wed, Feb 20, 2008 at 04:39:22PM +, Kemian Dang wrote: > Try add it to the /boot/loader.conf and restart to see whether it works. > My ndis0 can not get response from "ifconfig ndis0 scan", but I can > give it the ssid manually and make it work. thanks, it seems to be detected now, from dmesg: cardbus1: Expecting link target, got 0xfd cardbus1: Resource not specified in CIS: id=10, size=2000 cardbus1: Resource not specified in CIS: id=14, size=2 ndis0: mem 0x8802-0x88021fff, 0x8800-0x8801 irq 11 at device 0.0 on cardbus1 ndis0: NDIS API version: 5.1 ndis0: Ethernet address: 00:c0:49:a9:22:59 I still cannot connect to the wireless network, but this is probably another problem.. # ifconfig ndis0 up scan SSIDBSSID CHAN RATE S:N INT CAPS UoB-Wireless00:16:c7:71:9d:631 52M 18:0 100 E # # tail /etc/rc.conf ifconfig_ndis0="DHCP" # /etc/rc.d/netif start ndis0: no link .. giving up ndis0: flags=8843 mtu 1500 ether 00:c0:49:a9:22:59 media: IEEE 802.11 Wireless Ethernet autoselect status: no carrier ssid "" channel 1 authmode OPEN privacy OFF txpowmax 100 bmiss 7 # I also tried # ifconfig ndis0 ssid UoB-Wireless but that didn't help. I'll try to update the driver version from 4.0q to 6.0b15, but the latter is not working fine yet. I think it is because I mixed different versions of inf, sys and firmware. many thanks anton -- Anton Shterenlikht Room 2.6, Queen's Building Mech Eng Dept Bristol University University Walk, Bristol BS8 1TR, UK Tel: +44 (0)117 928 8233 Fax: +44 (0)117 929 4423 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: port net/acx100 for usr5410 pcmcia wireless FBSD 6.3
Try add it to the /boot/loader.conf and restart to see whether it works. My ndis0 can not get response from "ifconfig ndis0 scan", but I can give it the ssid manually and make it work. kemian On 20/02/2008, Anton Shterenlikht <[EMAIL PROTECTED]> wrote: > > On 19/02/2008, Anton Shterenlikht <[EMAIL PROTECTED]> wrote: > > > I tried to contact the port maintainer, but haven't heard anything back. > > > > > > I'd like to use US Robotics usr5410 wireless pcmcia card on my FBSD 6.3 > > > laptop. I understand this card is (was?) supported by port net/acx100. > > > However, the net/acx100/Makefile has: > > > > > > BROKEN= Does not compile on FreeBSD >= 6.x > > > > > > In addition the port maintainer's website, dev.kewl.org, states that > > > acx100 is obsolete, and was replaced by acx100+111. However, there > > > is no FBSD port for acx100+111. > > > > > > Is anybody using net/acx100? On what version of FBSD? > > > > > > Is anybody using acx100+111? What is the best way to install it? > > > > > > Is anybody using usr5410? With what driver? And what version of FBSD? > > > > > > Any other advice on getting usr5410 working on FBSD 6.3? > > > > On Wed, Feb 20, 2008 at 12:21:22PM +, Kemian Dang wrote: > > Try ndis, it works for my broadcom wireless adapter. > > I added ndis to the kernel and built the kernel module using > http://www.linuxant.com/usr11gv40q.zip driver. > > However, when I load the module: > > # kldstat -vn usr* > Id Refs AddressSize Name > 21 0xc216c000 3d000usr11g_sys.ko > Contains modules: > Id Name > 180 pci/usr11g_sys > 181 cardbus/usr11g_sys > 182 pccard/usr11g_sys > 183 uhub/usr11g_sys > # > > I get errors. From dmesg: > > cardbus1: Expecting link target, got 0xed > cardbus1: Resource not specified in CIS: id=10, size=2000 > cardbus1: Resource not specified in CIS: id=14, size=2 > ndis0: mem > 0x8802-0x88021fff,0x8800-0x8801 irq 11 at device 0.0 on cardbus1 > ndis0: NDIS API version: 5.1 > ndis0: init handler failed > device_attach: ndis0 attach returned 6 > > > What am I doing wrong? > > -- > Anton Shterenlikht > Room 2.6, Queen's Building > Mech Eng Dept > Bristol University > University Walk, Bristol BS8 1TR, UK > Tel: +44 (0)117 928 8233 > Fax: +44 (0)117 929 4423 > ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: port net/acx100 for usr5410 pcmcia wireless FBSD 6.3
> On 19/02/2008, Anton Shterenlikht <[EMAIL PROTECTED]> wrote: > > I tried to contact the port maintainer, but haven't heard anything back. > > > > I'd like to use US Robotics usr5410 wireless pcmcia card on my FBSD 6.3 > > laptop. I understand this card is (was?) supported by port net/acx100. > > However, the net/acx100/Makefile has: > > > > BROKEN= Does not compile on FreeBSD >= 6.x > > > > In addition the port maintainer's website, dev.kewl.org, states that > > acx100 is obsolete, and was replaced by acx100+111. However, there > > is no FBSD port for acx100+111. > > > > Is anybody using net/acx100? On what version of FBSD? > > > > Is anybody using acx100+111? What is the best way to install it? > > > > Is anybody using usr5410? With what driver? And what version of FBSD? > > > > Any other advice on getting usr5410 working on FBSD 6.3? > > On Wed, Feb 20, 2008 at 12:21:22PM +, Kemian Dang wrote: > Try ndis, it works for my broadcom wireless adapter. I added ndis to the kernel and built the kernel module using http://www.linuxant.com/usr11gv40q.zip driver. However, when I load the module: # kldstat -vn usr* Id Refs AddressSize Name 21 0xc216c000 3d000usr11g_sys.ko Contains modules: Id Name 180 pci/usr11g_sys 181 cardbus/usr11g_sys 182 pccard/usr11g_sys 183 uhub/usr11g_sys # I get errors. From dmesg: cardbus1: Expecting link target, got 0xed cardbus1: Resource not specified in CIS: id=10, size=2000 cardbus1: Resource not specified in CIS: id=14, size=2 ndis0: mem 0x8802-0x88021fff,0x8800-0x8801 irq 11 at device 0.0 on cardbus1 ndis0: NDIS API version: 5.1 ndis0: init handler failed device_attach: ndis0 attach returned 6 What am I doing wrong? -- Anton Shterenlikht Room 2.6, Queen's Building Mech Eng Dept Bristol University University Walk, Bristol BS8 1TR, UK Tel: +44 (0)117 928 8233 Fax: +44 (0)117 929 4423 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: port net/acx100 for usr5410 pcmcia wireless FBSD 6.3
Try ndis, it works for my broadcom wireless adapter. Kemian On 19/02/2008, Anton Shterenlikht <[EMAIL PROTECTED]> wrote: > I tried to contact the port maintainer, but haven't heard anything back. > > I'd like to use US Robotics usr5410 wireless pcmcia card on my FBSD 6.3 > laptop. I understand this card is (was?) supported by port net/acx100. > However, the net/acx100/Makefile has: > > BROKEN= Does not compile on FreeBSD >= 6.x > > In addition the port maintainer's website, dev.kewl.org, states that > acx100 is obsolete, and was replaced by acx100+111. However, there > is no FBSD port for acx100+111. > > Is anybody using net/acx100? On what version of FBSD? > > Is anybody using acx100+111? What is the best way to install it? > > Is anybody using usr5410? With what driver? And what version of FBSD? > > Any other advice on getting usr5410 working on FBSD 6.3? > > many thanks > anton > > -- > Anton Shterenlikht > Room 2.6, Queen's Building > Mech Eng Dept > Bristol University > University Walk, Bristol BS8 1TR, UK > Tel: +44 (0)117 928 8233 > Fax: +44 (0)117 929 4423 > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
port net/acx100 for usr5410 pcmcia wireless FBSD 6.3
I tried to contact the port maintainer, but haven't heard anything back. I'd like to use US Robotics usr5410 wireless pcmcia card on my FBSD 6.3 laptop. I understand this card is (was?) supported by port net/acx100. However, the net/acx100/Makefile has: BROKEN= Does not compile on FreeBSD >= 6.x In addition the port maintainer's website, dev.kewl.org, states that acx100 is obsolete, and was replaced by acx100+111. However, there is no FBSD port for acx100+111. Is anybody using net/acx100? On what version of FBSD? Is anybody using acx100+111? What is the best way to install it? Is anybody using usr5410? With what driver? And what version of FBSD? Any other advice on getting usr5410 working on FBSD 6.3? many thanks anton -- Anton Shterenlikht Room 2.6, Queen's Building Mech Eng Dept Bristol University University Walk, Bristol BS8 1TR, UK Tel: +44 (0)117 928 8233 Fax: +44 (0)117 929 4423 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
