AGP, AMD and FreeBSD

I'm getting this message when starting X with the nvidia driver... NVRM: AGP cannot be enabled on this combination of the AMD CPU and OS kernel NVRM: kernel upgrade recommended. NVRM: AGP cannot be enabled on this combination of the AMD CPU and OS kernel NVRM: kernel upgrade recommended. It always

FBSD 5.3 w/ Silicon Image SATA

I have a Asus A7N8X-E Deluxe with a Silicon Image Sil 3112a controller. I was able to create the ar0 device while loading the OS but cannot boot off the resulting load (the image is mirrored on both drives). The ar0 device does not appear in the kernel messages. The error I get is: Mounting

Re: anyone using the umodem(4) module/driver?

In message: <[EMAIL PROTECTED]> Julian Elischer <[EMAIL PROTECTED]> writes: : If so I'd like to hear success/failure reports.. : looking at closing or otherwise acting on: : http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/39341 : however the original submitter has dissappeared. I use u

Re: Suspend problem on FreeBSD 5.3-STABLE

M. Warner Losh wrote: In message: <[EMAIL PROTECTED]> Christopher Sean Hilton <[EMAIL PROTECTED]> writes: : Second, what I haven't been able to completely research: : : The PC card bus dies when on the first suspend resume. There : seems to be no way to restart it. : : The s

Re: Suspend problem on FreeBSD 5.3-STABLE

In message: <[EMAIL PROTECTED]> Christopher Sean Hilton <[EMAIL PROTECTED]> writes: : Second, what I haven't been able to completely research: : : The PC card bus dies when on the first suspend resume. There : seems to be no way to restart it. : : The second issue may be a c

Re: gcc segfaults on RELENG_5_3 buildworld

Ok, bad RAM. Sorry for posting uneccessarily. Aron On Sun, 9 Jan 2005 14:28:25 +0100, Aron Stansvik <[EMAIL PROTECTED]> wrote: > I'm going to test my RAM with memtest86, but I just wanted to check; > is anyone else seeing this? I'm using /usr/src as of a couple of hours > ago. The segfault occurs

gcc segfaults on RELENG_5_3 buildworld

I'm going to test my RAM with memtest86, but I just wanted to check; is anyone else seeing this? I'm using /usr/src as of a couple of hours ago. The segfault occurs when linking 'genconfig'. This is the first buildworld on a completely fresh 5.3-RELEASE install. Best regards, Aron Stansvik ___

Re: USB scanner not attached when connected after system startup]

On Wed, Jan 05, 2005 at 10:44:05PM +0100, Harald Weis wrote: > On Mon, Jan 03, 2005 at 09:32:20PM +0100, Roland Smith wrote: > > That's not good. AFAICT, the code that reports a new scanner to dmesg is > > also present in 4.x, so if you don't see a message, it looks like the > > scanner is not fou