On Sat, Nov 09, 2019 at 04:51:38PM -0500, Chris Ross wrote:
> > > Can you provide some guidance of what I need to do to get the mrsas
> > > driver to identify it when booting the install ISO?
> >
> > See the "PRIORITY" section of
> >
> > https://www.freebsd.org/cgi/man.cgi?query=mrsas=4
> >
> >
On Sat, Nov 09, 2019 at 04:48:10PM +, Gary Palmer wrote:
> > Hi Doug! Thanks. Okay, I infer from that that the mpr driver is for
> > HBAs that aren't raid? Grepping through the sources for 3516 found me
> > only mpr. Looking more carefully, at mrsas while knowing specifically
> > what I'm
On Sat, Nov 09, 2019 at 11:38:54AM -0500, Chris Ross wrote:
> On Fri, Nov 08, 2019 at 02:28:17PM -0800, Doug Ambrisko wrote:
> > On Tue, Nov 05, 2019 at 09:44:36PM +0100, Miroslav Lachman wrote:
> > | Chris Ross wrote on 11/05/2019 21:19:
> > | > On Tue, Nov 05, 2019 at 08:20:15PM +0100, Miroslav
On Fri, Nov 08, 2019 at 02:28:17PM -0800, Doug Ambrisko wrote:
> On Tue, Nov 05, 2019 at 09:44:36PM +0100, Miroslav Lachman wrote:
> | Chris Ross wrote on 11/05/2019 21:19:
> | > On Tue, Nov 05, 2019 at 08:20:15PM +0100, Miroslav Lachman wrote:
> | >> Chris Ross wrote on 11/05/2019 19:34:
> | >>>
On Tue, Nov 05, 2019 at 09:44:36PM +0100, Miroslav Lachman wrote:
| Chris Ross wrote on 11/05/2019 21:19:
| > On Tue, Nov 05, 2019 at 08:20:15PM +0100, Miroslav Lachman wrote:
| >> Chris Ross wrote on 11/05/2019 19:34:
| >>> Hello. I have a Cisco UCS C220-M5 with a RAID controller. It calls
On Wed, Nov 06, 2019 at 08:44:35AM +1100, Dewayne Geraghty wrote:
> Chris,
> After you've booted the kernel, the correct way to load a module that isn't
> already in the kernel, is to:
> kldload mpr
> To check if mpr is loaded, try
> kldstat -v|grep mpr
Thanks for this. I was able to boot and
Chris,
After you've booted the kernel, the correct way to load a module that isn't
already in the kernel, is to:
kldload mpr
To check if mpr is loaded, try
kldstat -v|grep mpr
However, if you've already placed
mpr_load="YES" in your /etc/loader.conf and rebooted your device, then you
probably
On Tue, Nov 05, 2019 at 12:29:00PM -0800, Freddie Cash wrote:
> > I tried "load", but wasn't able to devine how to load the mpr module with
> > that. Is that needed, or should 'mpr_load="YES"' have accomplished the
> > desired result?
>
> modulename_load="YES" is the syntax used in the
Chris Ross wrote on 11/05/2019 21:19:
On Tue, Nov 05, 2019 at 08:20:15PM +0100, Miroslav Lachman wrote:
Chris Ross wrote on 11/05/2019 19:34:
Hello. I have a Cisco UCS C220-M5 with a RAID controller. It calls itself
"Cisco 12G Modular Raid Controller with 2GB cache", PPID UCSC-RAID-M5.
On Tue, Nov 5, 2019 at 12:20 PM Chris Ross wrote:
> On Tue, Nov 05, 2019 at 08:20:15PM +0100, Miroslav Lachman wrote:
> > Chris Ross wrote on 11/05/2019 19:34:
> > > Hello. I have a Cisco UCS C220-M5 with a RAID controller. It calls
> itself
> > > "Cisco 12G Modular Raid Controller with 2GB
On Tue, Nov 05, 2019 at 08:20:15PM +0100, Miroslav Lachman wrote:
> Chris Ross wrote on 11/05/2019 19:34:
> > Hello. I have a Cisco UCS C220-M5 with a RAID controller. It calls itself
> > "Cisco 12G Modular Raid Controller with 2GB cache", PPID UCSC-RAID-M5.
> > Looking at the CIMC, it shows the
Chris Ross wrote on 11/05/2019 19:34:
Hello. I have a Cisco UCS C220-M5 with a RAID controller. It calls itself
"Cisco 12G Modular Raid Controller with 2GB cache", PPID UCSC-RAID-M5.
Looking at the CIMC, it shows the PCI vendor/device ids 1000:0014, which
looks to be an LSI MegaRAID Tri-Mode
Hello. I have a Cisco UCS C220-M5 with a RAID controller. It calls itself
"Cisco 12G Modular Raid Controller with 2GB cache", PPID UCSC-RAID-M5.
Looking at the CIMC, it shows the PCI vendor/device ids 1000:0014, which
looks to be an LSI MegaRAID Tri-Mode SAS3516. It looks like this should
be
13 matches
Mail list logo
