On Sat, Jun 04, 2011 at 01:56:15AM +0800, Ken Chen wrote:
Hello,
Anyone tried Realtek 8111e on 8.2-RELEASE? Realtek8111e should be supported,
but I got following message:
re0: RealTek 8168/8111 B/C/CP/D/DP/E PCIe Gibabit Ethernet port
0xe800-0xe8ff mem 0xfdfff000-0xfdff,
On Mon, Jul 18, 2011 at 03:06:40PM -0600, Scott Long wrote:
On Jul 18, 2011, at 12:02 PM, John Baldwin wrote:
On Friday, July 15, 2011 6:07:31 pm Mark McConnell wrote:
Dear folks,
I have two LSI raid cards, one of which (SCSI 320-I) supports
64-bit DMA when 4GB+ of DDR is present and
On Wed, Jul 20, 2011 at 11:54:06AM +0200, Stefan Esser wrote:
Am 19.07.2011 20:17, schrieb Artem Belevich:
On Tue, Jul 19, 2011 at 6:31 AM, John Baldwin j...@freebsd.org wrote:
The only reason it might be nice to stick with two fields is due to the
line
length (though the first line is
On Sun, Aug 21, 2011 at 04:01:10PM +0200, Willem Jan Withagen wrote:
Hi,
I'm assembling a few system with a ASUS P8 H161-MLE motherboard
which was supposed to have a 'Realtek® 8112L, 1 x Gigabit LAN
Controller(s)' onboard.
And to be honestly I never expected that version not to be
On Fri, Sep 16, 2011 at 12:41:23AM +0700, Eugene Grosbein wrote:
16.09.2011 00:14, John Baldwin пишет:
On Thursday, September 15, 2011 12:44:32 pm Eugene Grosbein wrote:
Hi!
I understand that it is a bit late for RELENG_6 reports as 6.4-RELEASE
was out in 2008
but the breakage had
On Fri, Sep 16, 2011 at 02:02:37AM +0700, Eugene Grosbein wrote:
16.09.2011 01:15, YongHyeon PYUN пишет:
I remember re(4) in 6.x also have a couple of bus_dma(9) bugs. How
about applying the following revision?
http://svnweb.freebsd.org/base?view=revisionrevision=175337
Not sure whether
On Fri, Sep 16, 2011 at 11:45:25AM +0700, Eugene Grosbein wrote:
16.09.2011 02:19, YongHyeon PYUN пишет:
On Fri, Sep 16, 2011 at 02:02:37AM +0700, Eugene Grosbein wrote:
16.09.2011 01:15, YongHyeon PYUN пишет:
I remember re(4) in 6.x also have a couple of bus_dma(9) bugs. How
about
On Sat, Sep 17, 2011 at 09:03:50PM +0700, Eugene Grosbein wrote:
17.09.2011 02:13, YongHyeon PYUN пишет:
On Fri, Sep 16, 2011 at 11:45:25AM +0700, Eugene Grosbein wrote:
16.09.2011 02:19, YongHyeon PYUN пишет:
On Fri, Sep 16, 2011 at 02:02:37AM +0700, Eugene Grosbein wrote:
16.09.2011 01
On Sun, Sep 18, 2011 at 03:11:46AM +0700, Eugene Grosbein wrote:
18.09.2011 03:05, YongHyeon PYUN пишет:
I have back-ported re(4)/rl(4) for latest 6.x.
http://people.freebsd.org/~yongari/re/6.x/README.txt
Just compile tested and not sure whether it fixes the issue.
I confirm
On Sun, Sep 25, 2011 at 03:57:02AM -0300, Nenhum_de_Nos wrote:
On Sun, September 25, 2011 03:46, Jeremy Chadwick wrote:
On Sun, Sep 25, 2011 at 03:32:36AM -0300, Nenhum_de_Nos wrote:
On Sat, September 24, 2011 22:12, Adrian Chadd wrote:
Surely this is something to take up with the
Hi,
If you have ALi/ULi M5261/M5263 ethernet controller please try the
patch at the following URL and let me know how it works.
http://people.freebsd.org/~yongari/dc/dc.uli562x.diff
The patch was generated against latest HEAD and it should be
cleanly applied to latest stable/8 and stable/7.
On Wed, Oct 19, 2011 at 12:09:41PM +0200, Marco Steinbach wrote:
YongHyeon PYUN wrote on 17.10.2011 02:22:
Hi,
If you have ALi/ULi M5261/M5263 ethernet controller please try the
patch at the following URL and let me know how it works.
http://people.freebsd.org/~yongari/dc/dc.uli562x.diff
On Wed, Oct 19, 2011 at 11:50:10AM -0700, Jeremy Chadwick wrote:
On Wed, Oct 19, 2011 at 11:43:17AM -0700, YongHyeon PYUN wrote:
Thanks for testing!
I already got a feedback from user and the user also said the patch
does not work. I'm trying to debug the issue as the user is willing
On Sun, Oct 16, 2011 at 05:22:13PM -0700, YongHyeon PYUN wrote:
Hi,
If you have ALi/ULi M5261/M5263 ethernet controller please try the
patch at the following URL and let me know how it works.
http://people.freebsd.org/~yongari/dc/dc.uli562x.diff
The patch was generated against latest HEAD
On Sat, Nov 26, 2011 at 04:05:58PM -0500, Mike Andrews wrote:
I have a Supermicro 5015A-H (Intel Atom 330) server with two Realtek
RTL8111C-GR gigabit NICs on it. As far as I can tell, these support
jumbo frames up to 7422 bytes. When running them at an MTU of 5000 on
Actually the maximum
On Mon, Nov 28, 2011 at 05:38:16PM -0500, Mike Andrews wrote:
On 11/27/11 8:39 PM, YongHyeon PYUN wrote:
On Sat, Nov 26, 2011 at 04:05:58PM -0500, Mike Andrews wrote:
I have a Supermicro 5015A-H (Intel Atom 330) server with two Realtek
RTL8111C-GR gigabit NICs on it. As far as I can tell
On Thu, Dec 29, 2011 at 10:51:25PM -0500, Mike Andrews wrote:
On 11/28/2011 6:42 PM, YongHyeon PYUN wrote:
On Mon, Nov 28, 2011 at 05:38:16PM -0500, Mike Andrews wrote:
On 11/27/11 8:39 PM, YongHyeon PYUN wrote:
On Sat, Nov 26, 2011 at 04:05:58PM -0500, Mike Andrews wrote:
I have a Supermicro
On Sun, Jan 01, 2012 at 09:03:07PM -0500, Mike Andrews wrote:
On Fri, 30 Dec 2011, YongHyeon PYUN wrote:
On Thu, Dec 29, 2011 at 10:51:25PM -0500, Mike Andrews wrote:
On 11/28/2011 6:42 PM, YongHyeon PYUN wrote:
On Mon, Nov 28, 2011 at 05:38:16PM -0500, Mike Andrews wrote:
On 11/27/11 8:39
On Wed, Jan 04, 2012 at 01:53:46AM +, FreeBSD Tinderbox wrote:
TB --- 2012-01-03 23:59:19 - tinderbox 2.8 running on freebsd-stable.sentex.ca
TB --- 2012-01-03 23:59:19 - starting RELENG_9 tinderbox run for
powerpc/powerpc
TB --- 2012-01-03 23:59:19 - cleaning the object tree
TB ---
On Sat, Jan 28, 2012 at 09:24:53PM -0500, Michael L. Squires wrote:
Sorry for late reply. Had been busy due to relocation.
There is a bug in the Tyan S4881/S4882 PCI-X bridges that was fixed with a
patch in 7.x (thank you very much). This patch is not present in the
8.2-STABLE code and
On Sun, Jan 29, 2012 at 01:19:40PM +0900, Randy Bush wrote:
What happens if you set hw.bge.allow_asf to 0 and use auto-negotiation
on both sides?
it works! the switch was already auto-neg, and i forced auto-neg on the
server side.
Apart from suspend/resume issue, bge(4) still needs
On Wed, Feb 22, 2012 at 08:49:31AM +0100, Attila Nagy wrote:
Hi,
I get this on a recent stable/9 system with uhci support removed from
the kernel config:
da0 at ciss0 bus 0 scbus0 target 0 lun 0
da0: COMPAQ RAID 0 VOLUME OK Fixed Direct Access SCSI-5 device
da0: 135.168MB/s transfers
On Wed, Feb 22, 2012 at 03:43:54PM +0100, Attila Nagy wrote:
On 02/23/12 05:15, YongHyeon PYUN wrote:
bge0:Broadcom unknown BCM5719, ASIC rev. 0x5719001 mem
0xf6bf-0xf6bf,0xf6be-0xf6be,0xf6bd-0xf6bd irq 32
at device 0.0 on pci3
bge0: CHIP ID 0x05719001; ASIC REV
On Thu, Feb 23, 2012 at 07:41:25AM +0100, Attila Nagy wrote:
On 02/23/12 21:44, YongHyeon PYUN wrote:
I have to ask more information for the controller to Broadcom.
Not sure whether I can get some hint at this moment though. :-(
Is there anything I can do? I ask this because I have to give
On Thu, Feb 23, 2012 at 09:46:20AM -0500, John Baldwin wrote:
On Tuesday, February 14, 2012 7:56:00 pm YongHyeon PYUN wrote:
On Sat, Jan 28, 2012 at 09:24:53PM -0500, Michael L. Squires wrote:
Sorry for late reply. Had been busy due to relocation.
There is a bug in the Tyan S4881
On Wed, Feb 29, 2012 at 01:03:29AM +0400, Pavel Gorshkov wrote:
My laptop running 9.0-RELEASE/amd64/GENERIC freezes and
(sometimes) unfreezes intermittently, logging the following:
Feb 28 23:07:36 lifebook kernel: interrupt storm detected on irq259:;
throttling interrupt source
$ vmstat
On Fri, Mar 02, 2012 at 01:13:56AM +0400, Pavel Gorshkov wrote:
On Thu, Mar 01, 2012 at 05:29:55PM -0800, YongHyeon PYUN wrote:
On Wed, Feb 29, 2012 at 01:03:29AM +0400, Pavel Gorshkov wrote:
My laptop running 9.0-RELEASE/amd64/GENERIC freezes and
(sometimes) unfreezes intermittently
On Tue, Mar 06, 2012 at 10:36:05AM -0500, John Baldwin wrote:
On Thursday, March 01, 2012 8:29:55 pm YongHyeon PYUN wrote:
On Wed, Feb 29, 2012 at 01:03:29AM +0400, Pavel Gorshkov wrote:
My laptop running 9.0-RELEASE/amd64/GENERIC freezes and
(sometimes) unfreezes intermittently, logging
On Tue, Mar 13, 2012 at 02:08:46PM +0100, Jan Winter wrote:
Hello,
on an Dell Blade m610 is not possible to change the network media option:
ifconfig bce0 media 100baseTX mediaopt full-duplex up
ifconfig: SIOCSIFMEDIA (media): Device not configured
Setting the media option to autoselect
On Wed, Mar 14, 2012 at 11:44:37PM +0100, Paul Guyot wrote:
Hello,
Changes brought to bce(4) prevents booting a R410 Dell server with
GELI-encrypted root ZFS partition requiring a passphrase, something that was
possible with 9-RELEASE.
Using a binary search, the bug comes from the
On Wed, Mar 14, 2012 at 03:34:20PM +0100, Jan Winter wrote:
On 03/14/12 19:40, YongHyeon PYUN wrote:
On Tue, Mar 13, 2012 at 02:08:46PM +0100, Jan Winter wrote:
Hello,
on an Dell Blade m610 is not possible to change the network media option:
ifconfig bce0 media 100baseTX mediaopt full
On Wed, Mar 14, 2012 at 10:58:33PM +0200, Sami Halabi wrote:
Hi,
I'm having this card on my IBM X3550, FBSD8.1-R-p8:
# pciconf -lv
bce0@pci0:11:0:0: class=0x02 card=0x03a91014 chip=0x163914e4
rev=0x20 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'NetXtreme II
On Thu, Mar 15, 2012 at 09:19:27AM +0100, Paul Guyot wrote:
Le 15 mars 2012 ? 18:10, YongHyeon PYUN a ?crit :
On Wed, Mar 14, 2012 at 11:44:37PM +0100, Paul Guyot wrote:
Hello,
Changes brought to bce(4) prevents booting a R410 Dell server with
GELI-encrypted root ZFS partition
On Thu, Mar 15, 2012 at 03:20:10PM +0100, Jan Winter wrote:
On 03/15/12 18:29, YongHyeon PYUN wrote:
On Wed, Mar 14, 2012 at 03:34:20PM +0100, Jan Winter wrote:
On 03/14/12 19:40, YongHyeon PYUN wrote:
On Tue, Mar 13, 2012 at 02:08:46PM +0100, Jan Winter wrote:
Hello,
on an Dell Blade m610
On Fri, Mar 16, 2012 at 04:49:54PM -0400, Mike Tancsa wrote:
I dont recall seeing this on RELENG_7, but I dont have a box to test with
anymore confirm. On one box I upgraded to RELENG_8 I just noticed the nic
will bounce if I enable tcpdump on it. Sure enough, trying on a different
On Fri, Mar 16, 2012 at 04:50:22PM +0100, Jan Winter wrote:
On 03/16/12 18:32, YongHyeon PYUN wrote:
On Thu, Mar 15, 2012 at 03:20:10PM +0100, Jan Winter wrote:
On 03/15/12 18:29, YongHyeon PYUN wrote:
On Wed, Mar 14, 2012 at 03:34:20PM +0100, Jan Winter wrote:
On 03/14/12 19:40, YongHyeon
On Fri, Mar 16, 2012 at 11:41:51PM +0100, Paul Guyot wrote:
Le 16 mars 2012 ? 18:06, YongHyeon PYUN a ?crit :
On Thu, Mar 15, 2012 at 09:19:27AM +0100, Paul Guyot wrote:
Le 15 mars 2012 ? 18:10, YongHyeon PYUN a ?crit :
On Wed, Mar 14, 2012 at 11:44:37PM +0100, Paul Guyot wrote
On Sat, Mar 17, 2012 at 09:53:31PM -0400, Mike Tancsa wrote:
On 3/17/2012 6:58 PM, YongHyeon PYUN wrote:
On Fri, Mar 16, 2012 at 04:49:54PM -0400, Mike Tancsa wrote:
tcpdump -ni fxp0 -c 20
fxp0: link state changed to DOWN
fxp0: promiscuous mode enabled
fxp0: link state changed to UP
On Mon, Apr 23, 2012 at 10:24:41AM -0400, John Baldwin wrote:
On Wednesday, March 07, 2012 3:40:53 pm YongHyeon PYUN wrote:
On Tue, Mar 06, 2012 at 10:36:05AM -0500, John Baldwin wrote:
On Thursday, March 01, 2012 8:29:55 pm YongHyeon PYUN wrote:
On Wed, Feb 29, 2012 at 01:03:29AM +0400
On Wed, Apr 25, 2012 at 09:35:28AM -0400, John Baldwin wrote:
On Tuesday, April 24, 2012 3:07:14 pm John Baldwin wrote:
On Tuesday, April 24, 2012 4:07:19 pm YongHyeon PYUN wrote:
On Mon, Apr 23, 2012 at 10:24:41AM -0400, John Baldwin wrote:
On Wednesday, March 07, 2012 3:40:53 pm
On Thu, Jun 21, 2012 at 02:05:33PM -0500, Pedro Giffuni wrote:
Hello;
I noticed a regression from 9.0 and I cannot boot directly FreeBSD
and access the network. Unfortunately I cannot recall the exact
commit where this started happening.
uname -a
FreeBSD pcbsd-8555 9.0-STABLE FreeBSD
On Sat, Jun 23, 2012 at 01:04:44PM -0700, Pedro Giffuni wrote:
Hello;
[...]
Iff I boot Windows first and then reboot to start
FreeBSD the network works fine.
This looks strange and I can't narrow down what other
changes made
since 9.0-RELEASE broke the driver. Would you try
On Mon, Jun 25, 2012 at 02:22:54PM -0700, Pedro Giffuni wrote:
Hi again;
--- Dom 24/6/12, Pedro Giffuni p...@freebsd.org ha scritto:
...
--- Lun 25/6/12, YongHyeon PYUN pyu...@gmail.com
ha scritto:
...
Could you narrow down which commit broke bge(4)?
Sean Bruno
On Tue, Jul 03, 2012 at 08:57:04PM +0200, Anders Nordby wrote:
Hi,
I'm having lots of difficulties with BCM5719, which is the default
network card of HP Proliant DL 360 G8 servers. I can get a few ping
replies before I get a couple of these:
bge0: watchdog timeout -- resetting
On Mon, Jul 09, 2012 at 10:34:21AM -0700, Sean Bruno wrote:
On Wed, 2012-07-04 at 18:01 -0700, YongHyeon PYUN wrote:
here is a WIP version at the following URL.
http://people.freebsd.org/~yongari/bge/if_bge.c
http://people.freebsd.org/~yongari/bge/if_bgereg.h
http://people.freebsd.org
On Wed, Aug 08, 2012 at 02:33:25PM +0300, George Mamalakis wrote:
Hi all,
Suddenly I am facing a problem on a new PC, using a configuration that I
have been using on more than 10 servers for the last few years. The only
thing that I find that differs from my other configuratinos is the NIC
On Thu, Aug 23, 2012 at 06:15:05PM +0200, Anders Nordby wrote:
Hi,
On ons, jul 04, 2012 at 06:01:36pm -0700, YongHyeon PYUN wrote:
There is a WIP version at the following URL.
http://people.freebsd.org/~yongari/bge/if_bge.c
http://people.freebsd.org/~yongari/bge/if_bgereg.h
http
On Fri, Nov 16, 2012 at 10:30:04AM -0500, Richard Kuhns wrote:
Hi all,
Over the last month or so I've installed FreeBSD 9 (-stable) on several Mac
Minis via the memstick image; they seem to be pretty good little boxes for
things like offsite secondary nameservers, for example, and they're
On Wed, Nov 21, 2012 at 02:59:34PM -0500, Richard Kuhns wrote:
On 11/20/12 03:52, YongHyeon PYUN wrote:
On Fri, Nov 16, 2012 at 10:30:04AM -0500, Richard Kuhns wrote:
Hi all,
Over the last month or so I've installed FreeBSD 9 (-stable) on several Mac
Minis via the memstick image
On Thu, Nov 22, 2012 at 10:49:21AM +0900, YongHyeon PYUN wrote:
On Wed, Nov 21, 2012 at 02:59:34PM -0500, Richard Kuhns wrote:
On 11/20/12 03:52, YongHyeon PYUN wrote:
On Fri, Nov 16, 2012 at 10:30:04AM -0500, Richard Kuhns wrote:
Hi all,
Over the last month or so I've installed
On Mon, Nov 26, 2012 at 10:13:47AM -0500, Richard Kuhns wrote:
On 11/21/12 21:08, YongHyeon PYUN wrote:
On Thu, Nov 22, 2012 at 10:49:21AM +0900, YongHyeon PYUN wrote:
On Wed, Nov 21, 2012 at 02:59:34PM -0500, Richard Kuhns wrote:
On 11/20/12 03:52, YongHyeon PYUN wrote:
On Fri, Nov 16
On Tue, Nov 27, 2012 at 08:34:13AM -0500, Richard Kuhns wrote:
On 11/27/12 00:24, YongHyeon PYUN wrote:
On Mon, Nov 26, 2012 at 10:13:47AM -0500, Richard Kuhns wrote:
On 11/21/12 21:08, YongHyeon PYUN wrote:
On Thu, Nov 22, 2012 at 10:49:21AM +0900, YongHyeon PYUN wrote:
On Wed, Nov 21
On Wed, Nov 28, 2012 at 10:12:05AM -0500, Richard Kuhns wrote:
On 11/27/12 19:19, YongHyeon PYUN wrote:
On Tue, Nov 27, 2012 at 08:34:13AM -0500, Richard Kuhns wrote:
On 11/27/12 00:24, YongHyeon PYUN wrote:
On Mon, Nov 26, 2012 at 10:13:47AM -0500, Richard Kuhns wrote:
On 11/21/12 21:08
On Thu, Nov 29, 2012 at 08:14:12AM -0500, Richard Kuhns wrote:
On 11/28/12 19:08, YongHyeon PYUN wrote:
On Wed, Nov 28, 2012 at 10:12:05AM -0500, Richard Kuhns wrote:
On 11/27/12 19:19, YongHyeon PYUN wrote:
On Tue, Nov 27, 2012 at 08:34:13AM -0500, Richard Kuhns wrote:
On 11/27/12 00:24
On Wed, Jan 02, 2013 at 08:33:41AM +0200, Daniel Braniss wrote:
Hi,
the last batch of changes to bge caused the ipmi to stop working on a
Sun Fire X2200 M2, and
bge0: Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x009003
mem
0xfdff-0xfdff,0xfdfe-0xfdfe irq 17
On Thu, Jan 03, 2013 at 08:45:05AM +0200, Daniel Braniss wrote:
On Wed, Jan 02, 2013 at 08:33:41AM +0200, Daniel Braniss wrote:
Hi,
the last batch of changes to bge caused the ipmi to stop working on a
Sun Fire X2200 M2, and
bge0: Broadcom NetXtreme Gigabit Ethernet Controller, ASIC
On Mon, Feb 04, 2013 at 07:15:51PM +0100, Oliver Fromme wrote:
Hello,
I need some advice how to debug this issue ...
Recently I got a new mainboard for a router, it's a
Gigabyte GA-H77N-WIFI with two onboard re(4) NICs.
The problem is that re0 works fine and re1 doesn't:
It doesn't
On Wed, Feb 06, 2013 at 01:40:11AM -0500, Mikhail T. wrote:
On 06.02.2013 01:24, Mikhail T. wrote:
Now, if only I could figure out, why my network card (3COM's 3C556
Mini PCI) is not seen by the 9.1...
Disabling Wake on LAN in the BIOS solved this problem. Now xl0 is seen
and functional.
.
YongHyeon PYUN wrote:
On Mon, Feb 04, 2013 at 07:15:51PM +0100, Oliver Fromme wrote:
Recently I got a new mainboard for a router, it's a
Gigabyte GA-H77N-WIFI with two onboard re(4) NICs.
The problem is that re0 works fine and re1 doesn't:
It doesn't receive any packets
On Wed, Feb 13, 2013 at 02:01:32PM -0800, Jeremy Chadwick wrote:
On Wed, Feb 13, 2013 at 01:57:38PM -0800, Doug Hardie wrote:
On 13 February 2013, at 02:29, Eugene Grosbein egrosb...@rdtc.ru wrote:
13.02.2013 17:25, Doug Hardie ??:
Monitoring a tcpdump between two systems, a
On Wed, Feb 13, 2013 at 05:00:59AM -0800, Jeremy Chadwick wrote:
On Wed, Feb 13, 2013 at 05:29:53PM +0700, Eugene Grosbein wrote:
13.02.2013 17:25, Doug Hardie ??:
Monitoring a tcpdump between two systems, a FreeBSD 9.1 system has the
following interface:
msk0:
On Wed, Feb 13, 2013 at 09:10:36PM -0800, Kevin Oberman wrote:
On Wed, Feb 13, 2013 at 5:37 PM, YongHyeon PYUN pyu...@gmail.com wrote:
On Wed, Feb 13, 2013 at 05:00:59AM -0800, Jeremy Chadwick wrote:
On Wed, Feb 13, 2013 at 05:29:53PM +0700, Eugene Grosbein wrote:
13.02.2013 17:25, Doug
On Thu, Mar 07, 2013 at 08:38:27AM -0800, Jeremy Chadwick wrote:
On Thu, Mar 07, 2013 at 04:38:54PM +0100, Lo?c Blot wrote:
Hi Marcelo, thanks. Here is a better trace:
-
kgdb /boot/kernel/kernel.symbols /var/crash/vmcore.11
GNU gdb 6.1.1 [FreeBSD]
On Sat, Mar 16, 2013 at 01:08:06PM +0400, Michael BlackHeart wrote:
Hello there. I've got a couple of things I don't get or can't handle.
[...]
re0@pci0:4:0:0: class=0x02 card=0x512c1462 chip=0x816810ec rev=0x02
hdr=0x00
vendor = 'Realtek Semiconductor Co., Ltd.'
device
On Mon, Mar 18, 2013 at 05:19:11PM +0400, Michael BlackHeart wrote:
2013/3/18 YongHyeon PYUN pyu...@gmail.com:
On Sat, Mar 16, 2013 at 01:08:06PM +0400, Michael BlackHeart wrote:
Hello there. I've got a couple of things I don't get or can't handle.
[...]
re0@pci0:4:0:0: class
On Tue, Mar 19, 2013 at 01:56:29PM +0900, YongHyeon PYUN wrote:
On Mon, Mar 18, 2013 at 05:19:11PM +0400, Michael BlackHeart wrote:
2013/3/18 YongHyeon PYUN pyu...@gmail.com:
On Sat, Mar 16, 2013 at 01:08:06PM +0400, Michael BlackHeart wrote:
Hello there. I've got a couple of things I
On Sat, May 11, 2013 at 10:57:44PM -0400, Michael L. Squires wrote:
I upgraded to FreeBSD 8.4-RC3 and noticed a problem with the fxp driver on
an older Supermicro single CPU single core Xeon motherboard.
I know that 8.3-Release does not have this issue, but don't know when in
the updates to
On Thu, May 23, 2013 at 09:49:19PM -0700, Jeremy Chadwick wrote:
On Thu, May 23, 2013 at 09:40:35PM -0700, Jeremy Chadwick wrote:
On Thu, May 23, 2013 at 11:42:44PM -0400, Glen Barber wrote:
On Thu, May 23, 2013 at 08:38:06PM -0700, Jeremy Chadwick wrote:
If someone wants me to test DHCP
On Fri, May 24, 2013 at 04:36:46PM +0900, Hiroki Sato wrote:
Hiroki Sato h...@freebsd.org wrote
in 20130524.162926.395058052118975996@allbsd.org:
hr YongHyeon PYUN pyu...@gmail.com wrote
hr in 20130524054720.ga1...@michelle.cdnetworks.com:
hr
hr A workaround is specifying
On Fri, May 24, 2013 at 03:32:29AM -0400, Charles Sprickman wrote:
On May 24, 2013, at 1:47 AM, YongHyeon PYUN wrote:
On Thu, May 23, 2013 at 09:49:19PM -0700, Jeremy Chadwick wrote:
On Thu, May 23, 2013 at 09:40:35PM -0700, Jeremy Chadwick wrote:
On Thu, May 23, 2013 at 11:42:44PM
On Sun, May 26, 2013 at 08:38:41PM +0900, YongHyeon PYUN wrote:
On Fri, May 24, 2013 at 04:36:46PM +0900, Hiroki Sato wrote:
Hiroki Sato h...@freebsd.org wrote
in 20130524.162926.395058052118975996@allbsd.org:
hr YongHyeon PYUN pyu...@gmail.com wrote
hr in 20130524054720.ga1
On Fri, May 24, 2013 at 05:31:13PM +0300, Daniel Braniss wrote:
hi, after upgrading to 9.1-stable, this particular hardware - SunFire X2200,
Show me dmesg(bge(4) and brgphy(4) only) and 'ifconfig bge1' output.
is toggeling bge1 DOWN/UP every few hours, this port is being used by the ILO.
To
On Mon, May 27, 2013 at 10:59:28AM +0300, Daniel Braniss wrote:
On Fri, May 24, 2013 at 05:31:13PM +0300, Daniel Braniss wrote:
hi, after upgrading to 9.1-stable, this particular hardware - SunFire
X2200,
Show me dmesg(bge(4) and brgphy(4) only) and 'ifconfig bge1' output.
On Tue, May 28, 2013 at 09:28:00AM +0300, Daniel Braniss wrote:
On Mon, May 27, 2013 at 10:59:28AM +0300, Daniel Braniss wrote:
On Fri, May 24, 2013 at 05:31:13PM +0300, Daniel Braniss wrote:
hi, after upgrading to 9.1-stable, this particular hardware - SunFire
X2200,
On Wed, May 29, 2013 at 08:47:14AM +0900, Hiroki Sato wrote:
YongHyeon PYUN pyu...@gmail.com wrote
in 20130528023300.ga3...@michelle.cdnetworks.com:
py I'll have access to the other box on Wednesday and will try the other
test.
py
py Here is patch I'm testing and it seems to work
On Tue, May 28, 2013 at 03:34:00PM -0400, Michael L. Squires wrote:
Short answer: it didn't work.
[...]
Patch did not solve the problem on the home NAT box. I'll try it on the
Hmm, I can't reproduce it on my box. I double checked every
possible controller initialization sequences in driver
On Tue, May 28, 2013 at 09:55:24AM +0300, Daniel Braniss wrote:
On Tue, May 28, 2013 at 09:28:00AM +0300, Daniel Braniss wrote:
On Mon, May 27, 2013 at 10:59:28AM +0300, Daniel Braniss wrote:
On Fri, May 24, 2013 at 05:31:13PM +0300, Daniel Braniss wrote:
hi, after upgrading to
On Fri, May 31, 2013 at 08:24:47AM +0300, Daniel Braniss wrote:
On Thursday, May 30, 2013 2:44:35 am Daniel Braniss wrote:
--/04w6evG8XlLl3ft
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment; filename=bge.media_sts.diff
Index: sys/dev/bge/if_bge.c
On Mon, Jun 03, 2013 at 09:25:33AM +0300, Daniel Braniss wrote:
On Fri, May 31, 2013 at 08:24:47AM +0300, Daniel Braniss wrote:
On Thursday, May 30, 2013 2:44:35 am Daniel Braniss wrote:
--/04w6evG8XlLl3ft
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition:
On Sun, Jun 09, 2013 at 12:21:37PM +0200, Alban Hertroys wrote:
I'm having an issue where my fxp0 interface keeps looping between DOWN/UP,
with dhclient requesting a lease each time in between. I think it's caused by
dhclient:
solfertje # dhclient -d fxp0
DHCPREQUEST on fxp0 to
On Sun, Jun 09, 2013 at 03:39:45PM +0200, Alban Hertroys wrote:
On Jun 9, 2013, at 13:45, YongHyeon PYUN pyu...@gmail.com wrote:
On Sun, Jun 09, 2013 at 12:21:37PM +0200, Alban Hertroys wrote:
I'm having an issue where my fxp0 interface keeps looping between DOWN/UP,
with dhclient
On Sun, Jun 09, 2013 at 09:13:33PM +0400, Lev Serebryakov wrote:
Hello, Jeremy.
You wrote 9 июня 2013 г., 14:44:01:
JC The issue is described in the 8.4-RELEASE Errata Notes; the driver is
JC using the same driver version as in stable/9, hence you're experiencing
JC the same problem. See
On Sun, Jul 07, 2013 at 05:56:09PM -0700, Doug Hardie wrote:
As I previously indicated, I have tested a couple more Minis and updated the
instructions with what I learned. Here is the revised version:
[...]
2.12.3Rebuilding the kernel to support the Ethernet Interface
Once the
On Tue, Jul 09, 2013 at 02:05:30PM +, dcx dcy wrote:
Hi all,
I am having an issue where my hme0 interface is always turning up
and down with dhclient requesting a lease.
I am thinking this could be the same issue described by Jeremy Chadwick on
June 9th:
On Wed, Jul 10, 2013 at 02:40:09AM +, dcx dcy wrote:
Hello,
the patch corrected this issue.
Thank you very much for your help and time, it is appreciated!
Best Regards,
Dominic.
Thanks for testing. Committed in r253134.
___
On Sun, Sep 22, 2013 at 08:28:08PM +, Thomas Mueller wrote:
I've been unable to establish Internet connection from a new computer with
Realtek 811E Ethernet despite this Ethernet chip working on another computer
with another MSI motherboard.
Problem motherboard is MSI Z77 MPOWER.
On Thu, Sep 26, 2013 at 02:31:30AM +, Thomas Mueller wrote:
It looks like 8168E-VL.
Could you try attached patch and show me the dmesg output(re(4) and
rgephy(4) only)? The patch was generated to support 8106E but it
will correctly show MAC revision number.
I assume I go to /usr/src
On Thu, Sep 26, 2013 at 08:09:36AM +, Thomas Mueller wrote:
I rebuilt the kernel while keeping the existing kernel, installing to
/boot/kernelre on the USB stick.
Unfortunately all the modules were redundantly rebuilt. Maybe I should have
had -D NO_MODULES instead of -DNO_MODULES?
.freebsd-stable
for a recent thread about the msk driver. The msk maintainer Yonghyeon
Pyun has opted for super safe options of 32K alignment!
It's a long shot, but you could try increasing BCE_DMA_ALIGN and/or
BCE_RX_BUF_ALIGN in the include file if_bcereg.h, say up to 4096, to see
On Wed, Apr 15, 2015 at 09:52:09PM +, Gareth Wyn Roberts wrote:
I've inserted code to print some values which show the differences between
specifying 4096 or 8192 for MSK_STAT_ALIGN. In both cases the status buffer
has length 0x4000 (8x2048=16K) but the alignments are different as
On Sun, Apr 12, 2015 at 05:57:34PM +, Gareth Wyn Roberts wrote:
I've run in to problems using the msk device where initially it works well
enough to set DHCP etc. but stops/freezes as soon as any appreciable network
traffic occurs . There are several threads describing similar symptoms
On Wed, Aug 12, 2015 at 09:44:06AM -0400, Roosevelt Littleton wrote:
Hi,
So, I can confirm with the attached patch. I have a working msk0 that
hasn't failed for the past month. I considered this problem fix for me.
Since, I have went a long time without any problems. Thanks!
I'm not sure
On Wed, Aug 19, 2015 at 09:00:35AM -0400, Rick Macklem wrote:
Hans Petter Selasky wrote:
On 08/19/15 09:42, Yonghyeon PYUN wrote:
On Wed, Aug 19, 2015 at 09:00:52AM +0200, Hans Petter Selasky wrote:
On 08/18/15 23:54, Rick Macklem wrote:
Ouch! Yes, I now see that the code that counts
On Tue, Aug 18, 2015 at 06:04:25PM -0400, Rick Macklem wrote:
Hans Petter Selasky wrote:
On 08/18/15 14:53, Rick Macklem wrote:
If this is just a test machine, maybe you could test with these lines (at
about #880)
in sys/netinet/tcp_output.c commented out? (It looks to me like this
On Wed, Aug 19, 2015 at 09:51:44AM +0200, Hans Petter Selasky wrote:
On 08/19/15 09:42, Yonghyeon PYUN wrote:
On Wed, Aug 19, 2015 at 09:00:52AM +0200, Hans Petter Selasky wrote:
On 08/18/15 23:54, Rick Macklem wrote:
Ouch! Yes, I now see that the code that counts the # of mbufs is before
On Wed, Aug 19, 2015 at 09:00:52AM +0200, Hans Petter Selasky wrote:
On 08/18/15 23:54, Rick Macklem wrote:
Ouch! Yes, I now see that the code that counts the # of mbufs is before the
code that adds the tcp/ip header mbuf.
In my opinion, this should be fixed by setting if_hw_tsomaxsegcount
On Wed, Aug 19, 2015 at 08:13:59AM -0400, Rick Macklem wrote:
Yonghyeon PYUN wrote:
On Wed, Aug 19, 2015 at 09:51:44AM +0200, Hans Petter Selasky wrote:
On 08/19/15 09:42, Yonghyeon PYUN wrote:
On Wed, Aug 19, 2015 at 09:00:52AM +0200, Hans Petter Selasky wrote:
On 08/18/15 23:54, Rick
On Sat, Jul 25, 2015 at 02:08:10PM +0300, Alnis Morics wrote:
Just tried 10.2-RC1 amd64 GENERIC, and the problem seems to be gone. I
was even able to scp a 500 MB file. Could it be related to this fix in
BETA2, as mentioned in the announcement, The watchdog(4) device has
been fixed to
at 10:28 AM, Yonghyeon PYUN pyu...@gmail.com wrote:
On Wed, Aug 26, 2015 at 10:06:29AM +0200, Johann Hugo wrote:
10.2-RELEASE does not work for me. It works for a very short while and
then it stops with msk0 watchdog timeout errors
Thanks a lot for your report. This is the first report
the impression that RX/TX descriptor ring
alignment shall trigger the same issue so it would be better to
know how attached patch works on your box.
Thanks.
Johann
On Sun, Aug 16, 2015 at 2:08 PM, Yonghyeon PYUN pyu...@gmail.com wrote:
On Wed, Aug 12, 2015 at 09:44:06AM -0400, Roosevelt
1 - 100 of 102 matches
Mail list logo
