Hi!
On Thu, Apr 05, 2007 at 04:15:35PM -0400, Sven Willenberger wrote:
I have tried both the settings ideas suggested above but I cannot even
get out of the gate with those. Setting net.inet.tcp.{send,recv}space to
setting net.inet.tcp.{send,recv}space to 131072 allows me to start
Now you
Hi,
I have seen some problems with a new file system that I created
yesterday in that I could repeatedly get the system to crash in with a
mkdir.
Here is the disk information
mfid1: MFI Logical Disk on mfi1
mfid1: 5716992MB (11708399616 sectors) RAID volume 'Images' is optimal
I created a
Dag-Erling Smørgrav wrote:
Nikolas Britton [EMAIL PROTECTED] writes:
Can anything in the list below be removed from CURRENT?
No. Modern i386 and amd64 still have an ISA bus, and devices
connected to that bus, even if they don't have ISA slots.
Some mainboards for industrial use even have
Sven Willenberger wrote:
On Thu, 2007-04-05 at 17:38 +0100, Tom Judge wrote:
Dmitriy Kirhlarov wrote:
On Thu, Apr 05, 2007 at 10:58:56AM -0400, Sven Willenberger wrote:
I am trying to set up a HA type system involving two identical boxes and
have gone through the following to set up the
On Friday 06 April 2007 02:43, Kevin Oberman wrote:
I always run a 2000 line scrollback buffer. 200 won't make it to the
start of my boot. And, it's SC_HISTORY_SIZE. I'm unclear as to what you
refer to as 'slideshow like teleporting', though.
in case someone want colourful console
options
Hi,
I have ASUS P5B, running FreeBSD 6.2-STABLE.
It has on-board re(4) as follows,
re0: RealTek 8168/8111B PCIe Gigabit Ethernet port 0xa800-0xa8ff mem
0xfe9ff000-0xfe9f irq 19 at device 0.0 on pci3
miibus1: MII bus on re0
rgephy0: RTL8169S/8110S media interface on miibus1
rgephy0:
Hi list,
All those things work only under i386 right ?
There is no option VESA in amd64 ?
Andrei Kolu wrote:
On Friday 06 April 2007 02:43, Kevin Oberman wrote:
I always run a 2000 line scrollback buffer. 200 won't make it to the
start of my boot. And, it's SC_HISTORY_SIZE. I'm unclear as
On Thursday, 5 April 2007 at 16:15:35 -0400, Sven Willenberger wrote:
On Thu, 2007-04-05 at 17:38 +0100, Tom Judge wrote:
Dmitriy Kirhlarov wrote:
On Thu, Apr 05, 2007 at 10:58:56AM -0400, Sven Willenberger wrote:
I am trying to set up a HA type system involving two identical boxes and
From: FUJITA Kazutoshi [EMAIL PROTECTED]
Subject: re(4) can't receive some multicast ?
Date: Fri, 06 Apr 2007 20:01:05 +0900 (JST)
I have ASUS P5B, running FreeBSD 6.2-STABLE.
It has on-board re(4) as follows,
It seems re0 can't receive IPv6 RA message.
But in promisc mode(running tcpdump on
Hi, Jack,
Jack Vogel wrote:
[EMAIL PROTECTED]:14:0: class=0x02 card=0x002e8086 chip=0x100e8086
rev=0x02
hdr=0x00
[...]
The driver in 6.2 RELEASE fixed all known problems with
watchdogs, other than REAL issues with the network/hardware.
Have you tried installing that?
A friend of mine
LI Xin wrote:
Hi, Jack,
Jack Vogel wrote:
[EMAIL PROTECTED]:14:0: class=0x02 card=0x002e8086 chip=0x100e8086
rev=0x02
hdr=0x00
[...]
The driver in 6.2 RELEASE fixed all known problems with
watchdogs, other than REAL issues with the network/hardware.
Have you tried installing that?
LI Xin wrote:
Hi, Jack,
Jack Vogel wrote:
[EMAIL PROTECTED]:14:0: class=0x02 card=0x002e8086 chip=0x100e8086
rev=0x02
hdr=0x00
[...]
The driver in 6.2 RELEASE fixed all known problems with
watchdogs, other than REAL issues with the network/hardware.
Have you tried installing that?
Hi list,
Rong-en Fan wrote:
On 3/13/07, Stefan Lambrev [EMAIL PROTECTED] wrote:
Hello,
Rong-en Fan wrote:
On 3/12/07, Stefan Lambrev [EMAIL PROTECTED] wrote:
Rong-en Fan wrote:
Hi folks,
ncurses in 6.x is pretty old. We have update-to-date ncurses in 7.x
with wide character support
On 4/7/07, Stefan Lambrev [EMAIL PROTECTED] wrote:
Hi list,
Rong-en Fan wrote:
On 3/13/07, Stefan Lambrev [EMAIL PROTECTED] wrote:
Hello,
Rong-en Fan wrote:
On 3/12/07, Stefan Lambrev [EMAIL PROTECTED] wrote:
Rong-en Fan wrote:
Hi folks,
ncurses in 6.x is pretty old. We have
Date: Fri, 06 Apr 2007 15:13:33 +0300
From: Stefan Lambrev [EMAIL PROTECTED]
Sender: [EMAIL PROTECTED]
Hi list,
All those things work only under i386 right ?
There is no option VESA in amd64 ?
Andrei Kolu wrote:
On Friday 06 April 2007 02:43, Kevin Oberman wrote:
I always run
Hi all,
I just merged ncurses 5.6 and wide character support from
HEAD to 6.x. That means ncurses in 6.x is now up-to-date and
has wide character support, i.e., ncursesw library.
Regards,
Rong-En Fan
___
freebsd-stable@freebsd.org mailing list
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
- --On Friday, April 06, 2007 06:17:04 +0100 Chris [EMAIL PROTECTED] wrote:
I am seeing the no buffer space error on a machine running 6.2 STABLE
feb 24 code, the machine isn't using gmirror. I had to recude
recvspace and sendspace to lower
On Fri, Apr 06, 2007 at 11:05:22AM +0100, Tom Judge wrote:
Hi,
I have seen some problems with a new file system that I created
yesterday in that I could repeatedly get the system to crash in with a
mkdir.
Here is the disk information
mfid1: MFI Logical Disk on mfi1
mfid1: 5716992MB
On Thu, Apr 05, 2007 at 04:27:46PM +0200, Oliver Fromme wrote:
I think 800x600x4 would be even quicker, because no VESA
calls are required at all for screen output.
Oops, I was mistaken. 800x600x4 (MODE_258) is what I'm using.
800x600x8 returns Operation not supported when trying to switch to
On Thu, 5 Apr 2007, Jack Vogel wrote:
Our test group uses a script that does 100 iterations of
a module load, then bring up all interfaces, and then
unload driver.
Depending on the system in anything from just a few
iterations to 20 or more, the system will panic.
Just a me too here. :p
20 matches
Mail list logo
