Ari Suutari wrote:
Hi,
I started experimenting with carp, in order to replace
freevrrpd stuff we are currently using.
I'm running quite recent version of RELENG_6 (compiled
this week).
I was able to configure carp ok, but for some odd reason the
interface goes down by itself shortly after it
Scott Long wrote:
Bill Moran wrote:
I've copied many of the people who I've been working with directly on
this issue.
Can anyone provide a status update on these problems? Discussion seems
to have stopped since Oct 5.
Any new patches to test?
I'm actively working on fixing the driver
Ari Suutari wrote:
Ari Suutari wrote:
I have now tested with real hardware (ethernet is fxp0) and
under VmWare (ethernet is lnc0). Same problem on both.
I'll have to correct this. Carp works with fxp0. Problem is
only under vmware, which makes me more and more suspect
that
Kris Kennaway wrote:
On Wed, Oct 18, 2006 at 06:15:14PM +0100, Jason Thomson wrote:
Using the driver from HEAD* in the latest RELENG_6 didn't fix our
problems.
We could still trigger the Watchdog timeout when copying a local file to
an NFS mounted filesystem (UDP mount, GigE speeds).
It
Guido van Rooij wrote:
Is it possible to use gmirror to mirror a single BSD partition?
If not: is it possible with other tools?
-Guido
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe,
Guido van Rooij wrote:
On Wed, Oct 25, 2006 at 11:07:14AM +0100, Tom Judge wrote:
Guido van Rooij wrote:
Is it possible to use gmirror to mirror a single BSD partition?
If not: is it possible with other tools?
Yes it is possible, I found this site had very good examples
Guido van Rooij wrote:
On Wed, Oct 25, 2006 at 11:34:25AM +0100, Tom Judge wrote:
Guido van Rooij wrote:
On Wed, Oct 25, 2006 at 11:07:14AM +0100, Tom Judge wrote:
Guido van Rooij wrote:
Is it possible to use gmirror to mirror a single BSD partition
Fredrik Widlund wrote:
Ivan Voras wrote:
Several:
- are there cache differences between the controllers (amount of
memory, cache policy)?
Default settings on both.
- how does writing directly to the device (bypassing file system)
compare?
Drives are four seagate 7200.10
Hi,
I am seeing some problems with some problems with IPsec encrypted gif
tunnels and path mtu discovery.
It seems that the router with the IPsec tunnel sends an ICMP need to
frag packet with the next hop mtu set to 0. This causes ssh to
retransmit a the same packet without reducing the
Johann Hugo wrote:
On Tuesday 07 November 2006 19:39, Tom Judge wrote:
I'm seeing the same problem on my gif tunnel.
For an interim work around you can reduce the MTU size between Box1 and Box2
e.g route change Box2 -mtu 1200. After it's starts working you can change it
back to 1500 en
Scott Long wrote:
Vivek Khera wrote:
Some time long ago, someone posted a very short C program that probes
the LSI controller and spits out this kind of output:
[EMAIL PROTECTED] amrstat
Drive 0:34.18 GB, RAID1 writeback,no-read-ahead,no-adaptative-io
optimal
Drive 1: 102.54 GB, RAID1
Hi,
I have the following options in /etc/make.conf:
NO_PROFILE=true
NO_SENDMAIL=true
NO_GAMES=true
NO_I4B=true
NO_ATM=true
NO_INET6=true
NO_BLUETOOTH=true
NO_IPFILTER=true
NO_RCMDS=true
NO_KERBEROS=true
However after a make buildworld installworld the utilities and libs
associated with these
Artem Kuchin wrote:
I hope some people will understand what i am talking about, because
the technology, i think, is not very popular, but can come VERY handy.
Intel AMT Serial over LAN (SOL, why is it called 'over LAN' if it is
really
'OVER IP'?) allows to boot into BIOS of a remote machine
Artem Kuchin wrote:
Artem Kuchin wrote:
snip/
We have a number of Dell PowerEdge 2950's that we boot using the built
in SOL, which does run over IP as we use it across a routed VPN
backbone (server in the data center, console in the office). We have
found that the IPMI serial port is
Nikolas Britton wrote:
On 3/12/07, Andras Gót [EMAIL PROTECTED] wrote:
Nikolas Britton wrote:
On 3/12/07, Ronald Klop [EMAIL PROTECTED] wrote:
On Mon, 12 Mar 2007 20:16:32 +0100, Nikolas Britton
[EMAIL PROTECTED] wrote:
Is FreeBSD making any progress in Xen Dom0 / Intel VT support? I'd
Hi,
I have a HA NFS server setup, but I am having some problems with
mounting the NFS shares. I have had to patch mountd to allow it to be
configured with an IP to bind to, its a bit of quick hack (no docs,
ipv6 etc...) but solves the problem for us where mountd sends the
packets from
Tom Judge wrote:
Hi,
I have a HA NFS server setup, but I am having some problems with
mounting the NFS shares. I have had to patch mountd to allow it to be
configured with an IP to bind to, its a bit of quick hack (no docs,
ipv6 etc...) but solves the problem for us where mountd sends
Dmitriy Kirhlarov wrote:
On Thu, Apr 05, 2007 at 10:58:56AM -0400, Sven Willenberger wrote:
I am trying to set up a HA type system involving two identical boxes and
have gone through the following to set up the systems:
Slave server:
ggated -R 196608 -S 196608
(exporting /dev/amrd1 )
Hi,
I have seen some problems with a new file system that I created
yesterday in that I could repeatedly get the system to crash in with a
mkdir.
Here is the disk information
mfid1: MFI Logical Disk on mfi1
mfid1: 5716992MB (11708399616 sectors) RAID volume 'Images' is optimal
I created a
Sven Willenberger wrote:
On Thu, 2007-04-05 at 17:38 +0100, Tom Judge wrote:
Dmitriy Kirhlarov wrote:
On Thu, Apr 05, 2007 at 10:58:56AM -0400, Sven Willenberger wrote:
I am trying to set up a HA type system involving two identical boxes and
have gone through the following to set up
Kris Kennaway wrote:
On Fri, Apr 06, 2007 at 11:05:22AM +0100, Tom Judge wrote:
Hi,
I have seen some problems with a new file system that I created
yesterday in that I could repeatedly get the system to crash in with a
mkdir.
Here is the disk information
mfid1: MFI Logical Disk on mfi1
Hi,
I have seen some strange behaviour today with VLAN interfaces on bce
interfaces. I am running 6.2 Release on i386.
I have a bce interface setup on a gig-e network with an MTU of 8192 i
attach a vlan interface to this and chnage the vlan if mtu to 1500 as it
has 100Mbit devices on it.
Richard Tector wrote:
Ivan Voras wrote:
Richard Tector wrote:
I'm suffering from very slow write performance on a Dell PowerEdge 860
with the SAS5/IR controller (mpt driver) running either 6.2-RELEASE or
6.2-STABLE with sources from yesterday. The controller hosts 2 Western
Digital 320GB
Hi,
Recently I have noticed that one of our Dell PE1950's has been crashing
a lot with the following reason supervisor read, page not present.
The system runs 6.2 Release under i386.
I have attached 2 back traces, and I still have both cores if any more
information is required. Any light
Kai wrote:
On Thu, Apr 19, 2007 at 04:14:23PM +0200, Christian Walther wrote:
On 19/04/07, Kai [EMAIL PROTECTED] wrote:
On Wed, Apr 11, 2007 at 12:53:32PM +0200, Kai wrote:
Hello all,
We're running into regular panics on our webserver after upgrading
from 4.x to 6.2-stable:
Michael Proto wrote:
Kris Kennaway wrote:
On Mon, Apr 23, 2007 at 01:24:52PM +0100, Tom Judge wrote:
Hi,
Recently I have noticed that one of our Dell PE1950's has been crashing
a lot with the following reason supervisor read, page not present.
The system runs 6.2 Release under i386.
I
Matthew Jacob wrote:
I've been trying to get one in my lab. I also am completely saturated
with two jobs and a new infant (which is why I'm responding to this at
0100) and was trying to get a box in my lab that evidenced te
behaviour. If I get stuck when I actually get time to chase this, I'll
Jack Vogel wrote:
I introduced a change yesterday that limited TSO to PCI Express
adapters, I did this more for avoidance rather than a bug fix, and
I'm not 100% sure its the right thing, so I thought I would poll
everyone, do you have a PCI-X adapter and are using TSO without
problems and wish
Sorry sent this to the wrong list, should have been [EMAIL PROTECTED]
Sorry for the spam.
Tom Judge wrote:
Jack Vogel wrote:
I introduced a change yesterday that limited TSO to PCI Express
adapters, I did this more for avoidance rather than a bug fix, and
I'm not 100% sure its the right
Sorry about the top post but this has nothing to do with your problem.
Please stop hijacking threads. Both of you last 3 messages that should
have been new threads (Install SCSI over ATAPI fro DVD, xfce4 broke
after pkgdb -Ff and this thread) have hijacked totally unrelated threads.
Can I
Albert Wong wrote:
SNIP
[Usually it only shows about three or four of these repeated errors.]
I am using FreeBSD 6.2 and MySQL 4.1. I am trying to use the libthr
threading mechanism through the libmap.conf setting, as to earlier in this
thread post, as a possible fix. [Though, I don't know if
Chuck Swiger wrote:
On May 22, 2007, at 12:03 PM, Olivier Mueller wrote:
So I can only do that after the installation of mysql50-client, which
means all the services will have to be stopped during the compilation of
mysql50-server, which usually takes some time.
Isn't there a better way? How
[EMAIL PROTECTED] wrote:
cvsup and built around 20.30 BST
cd /usr/src; make -f Makefile.inc1 install
=== share/info install
=== include install
creating osreldate.h from newvers.sh
touch: not found
***error code 127
Stop in /usr/src/include
***error code 1
I tried cd usr.bin/touch make make
Hi,
I am seeing some problems with one of my Dell PowerEdge 2950's (running
RELENG_6_2) on board bce NICs. The interface seems to crash with the
following errors, to which the fix seems to be and ifconfig bce0 down;
ifconfig bce0 up:
Jun 7 12:20:29 gonzo kernel: bce0: discard frame w/o
Tom Evans wrote:
On Tue, 2007-06-19 at 23:40 +1000, Norberto Meijome wrote:
On Thu, 14 Jun 2007 09:29:09 -0500
[EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
A RELENG_6 kernel from May 21 works fine with skype but boot a newer
kernel and skype seems to be blocking port 80. Apache logs show
Michael Worobcuk wrote:
Hi,
I am trying to set up my first webserver. I bought a Dell Poweredge 860,
provided with a SAS5/IR RAID-Controller.
The problem is now, that I cannot find software, that monitors the state
of my disks. I already tried megarc from the ports but all I get is a
short
Michael Worobcuk wrote:
Am 18.07.2007 um 01:27 schrieb Tom Judge:
Michael Worobcuk wrote:
Hi,
I am trying to set up my first webserver. I bought a Dell Poweredge
860, provided with a SAS5/IR RAID-Controller.
The problem is now, that I cannot find software, that monitors the
state of my
Michael Worobcuk wrote:
Tom Judge wrote:
As for performance issues with the SAS5/i, there is a problem in the
controller. A work arround was created by Scott Long which created a
sysctl that could be set to cause the controller to turn on the on
drive write cache's. These changes where
Michael Worobcuk wrote:
Am 21.07.2007 um 00:18 schrieb Tom Judge:
Michael Worobcuk wrote:
Tom Judge wrote:
As for performance issues with the SAS5/i, there is a problem in the
controller. A work arround was created by Scott Long which created
a sysctl that could be set to cause
Tom Samplonius wrote:
- Artem Kuchin [EMAIL PROTECTED] wrote: ...
But i don't understand how and why it happened. ONly 6 hours ago (a
night before) all those files were backed up fine w/o any read
error. And now, right after replacing the driver and starting
rebuild it said that there are
Mark Andrews wrote:
On 12/23/-58 20:59, Greg Rivers wrote:
div class=moz-text-flowedI connect to certain wireless networks that
require the EAP_GTC and EAP_OTP features in wpa_supplicant. These
features are not compiled into wpa_supplicant by default.
Using the patch below works great, but
Krassimir Slavchev wrote:
SNIP
Any ideas how to debug this?
SNIP
Have you looked at:
http://www.freebsd.org/doc/en_US.ISO8859-1/books/developers-handbook/kerneldebug.html
Tom
___
freebsd-stable@freebsd.org mailing list
Have you read the thread HEADSUP: don't upgrade to RELENG_6 now (7 is
fine)? I would suggest you do as the fix has been posted by Rong-en
Fan 8 hours ago.
Tom
Robin P. Blanchard wrote:
Any suggestions how to get past this (now make itself it broken) ?
Buildworld/installworld with this
Espen Tagestad wrote:
Hi,
We recently bought 3 new Dell 860 servers with the onboard SAS5/IR SATA
RAID-controller. They seem to be quite well spec'ed servers with
management and everything - but I am experiencing av major performance
issue with the disc i/o. On write I get at max 7-8MB/sec,
Espen Tagestad wrote:
Tom Judge wrote:
Espen Tagestad wrote:
We recently bought 3 new Dell 860 servers with the onboard SAS5/IR
SATA RAID-controller. They seem to be quite well spec'ed servers with
management and everything - but I am experiencing av major
performance issue with the disc i/o
Look at the footers of this email for how to remove yourself.
Swearing will not get you any where, and is likely to result in people
not helping you.
Clifford, Ken wrote:
Take me off this fucking list!@
From: owner-freebsd-sta...@freebsd.org
Kevin Oberman wrote:
I just noticed that my dhclient.conf file seems to be ignored in
8.0. Worked fine in 7.2.
interface ath0 {
send host-name slan.XXX.YYY;
prepend domain-name XXX.YYY ;
append domain-name-servers 198.128.W.ZZ;
}
Your interface is wrong, it should be wlanX not athX
Michael Butler wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Marc G. Fournier wrote:
G'day ...
Yesterday, I setup nagios to do some system monitoring ... installed the
latest version from ports into a jail, so that I could easily move it around
between machines as I upgrade, without
Jarrod Sayers wrote:
On 03/01/2008, at 1:56 AM, Tom Judge wrote:
I have also seen this issue, but have always put it down to the way that
we manage our nagios deployments with cfengine. I will try to deploy
this change and monitor for the problem to see if it persists.
I hope I can confirm
Richard Bates wrote:
Sorry for the repost...
I don't think the first one posted..
posted to freebsd.stable, freebsd-current, Freebsd-hardware
I checked the hardware in the online documentation manual/hardware
It only lists the bits and peices of the machine say the hard drive
controller and
Ferdinand Goldmann wrote:
Hi!
I am in the process of buying new Dell hardware, mainly the 2950 III.
According to various postings I found, the PERC6/i Controller _should_
work with FreeBSD 6.3. Does anyone successfully use a 2950 III with
PERC6/i controller and can confirm this?
Sorry if
Ulrich Spoerlein wrote:
On Jan 18, 2008 9:11 AM, Johan Ström [EMAIL PROTECTED] wrote:
Your no,barely, bad hell no seems to fit pretty good.. I did some
testing during the night with the above (non-production) setup.
What I did was doing some rsyncing over the night:
while true ; do
Erik Trulsson wrote:
On Sun, Jan 20, 2008 at 04:48:56PM +, David Wood wrote:
[ambrisko@ and scottl@ added to CCs]
Hi there,
In message [EMAIL PROTECTED],
Aldas Nabazas [EMAIL PROTECTED] writes
We bought a new Dell PowerEdge 2950III with Perc 6/i and have the disk
geometry problem using
Vivek Khera wrote:
On Jan 23, 2008, at 12:30 AM, navneet Upadhyay wrote:
SNIP
6. Which platform/machine which BSD supports. Is Dell 2950 ok
I've only ever had one compatibility issue with a Dell, and that was
easily fixed by teaching the bge ethernet driver the name of the chipset
used
Josh Endries wrote:
Hi Scott,
Scott Long wrote:
LSI, Highpoint, Areca, 3ware, and Adaptec are all well supported in
FreeBSD.
Are they? I don't see any reference to the LSI8708, LSI or LSI1068
in the man pages I can find...does anyone use these? Some people have
problems with the PERC
Primeroz lists wrote:
Hi all,
we are experiencing repeated crash on a Dell PowerEdge 2950 (rev 1 or 2).
FBSD release is 6.2-RELEASE-p5 , AMD64. 2xXeon QuadCore and 8G of Ram.
SNIP
$ sudo kgdb /usr/obj/usr/src/sys/PE2950/kernel.debug vmcore.2
SNIP
This back trace will be useless, I
Hi,
We have been building RELENG_6_x source trees from read only NFS file
systems for well over a year now with out any problems. However I have
just tried to do make buildworld on a RELENG_7_0 source tree from
yesterday and it failed to build with the following error:
===
Xin LI wrote:
Tom Judge wrote:
Hi,
We have been building RELENG_6_x source trees from read only NFS file
systems for well over a year now with out any problems. However I
have just tried to do make buildworld on a RELENG_7_0 source tree
from yesterday and it failed to build
Hi,
I was wondering if anyone was using freebsd-update to manage deployment
of custom FreeBSD builds to there systems.
Here is the scenario, I have 2 binary build servers at the moment (one
for i386 and one for amd64) and currently we stage the deployments of
updates on NFS servers at each
-server/
reading through some of the scripts might give some clues.
Regards,
Daniel Bond.
Thanks for the info, I will look into this over the next few weeks and
see what I can come up with.
Regards
Tom Judge
On Jan 14, 2009, at 6:05 AM, Tom Judge wrote:
Hi,
I was wondering if anyone
Tim Chen wrote:
My machine is an IBM HS21 blade server and the NIC is bce.
bce1: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) mem
0xd800-0xd9ff irq 19 at device 0.0 on pci6
miibus1: MII bus on bce1
bce1: Ethernet address: 00:1a:64:34:f2:fa
bce1: [ITHREAD]
bce1: ASIC (0x57081021); Rev
Hi,
I had a panic today when someone created a symlink over NFS to a UFS
file system.
There seem to be 2 open PRs on this already:
kern/122380
kern/133980
Any ideas on a fix? I have not tried to repeat this crash but I have
saved a snapshot of the file system so I can test if needed. I
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Jaakko Heinonen wrote:
On 2009-11-30, Tom Judge wrote:
kern/122380
kern/133980
Any ideas on a fix?
panic: ffs_valloc: dup alloc
You may be hitting UFS2 32-bit inode limit bug. See this analysis by
Bruce Evans:
http://docs.freebsd.org/cgi
63 matches
Mail list logo
