On Sun, Dec 12, 2010 at 12:48 AM, Nick Hibma n...@van-laarhoven.org wrote:
But we will continue the saga about this strange USB modem, if no
objections from your side :)
Is it possible to apply some quirk or some another workaround which
will solve the issue with endless USB_ERR_STALLED
It is derived error I think
When it attaches finally, it report no errors at all:
Whatever it is, the quirk should resolve it. MAX LUN is not necessary per se I
think.
Dec 12 10:38:36 rainhaven kernel: ugen5.2: PANTECH at usbus5
Dec 12 10:38:36 rainhaven kernel: umodem0: PANTECH PANTECH USB
Is there any way I can make sure that the following device:
ugen1.3: product 0x6001 vendor 0x0403 at usbus1, cfg=0 md=HOST spd=FULL
(12Mbps) pwr=ON
bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0200
bDeviceClass = 0x
bDeviceSubClass = 0x
bDeviceProtocol = 0x
On Sunday 12 December 2010 19:49:24 Emanuel Haupt wrote:
Is there any way I can make sure that the following device:
ugen1.3: product 0x6001 vendor 0x0403 at usbus1, cfg=0 md=HOST spd=FULL
(12Mbps) pwr=ON
bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0200
bDeviceClass =
On 13 December 2010 07:49, Emanuel Haupt eha...@freebsd.org wrote:
Is there any way I can make sure that the following device:
ugen1.3: product 0x6001 vendor 0x0403 at usbus1, cfg=0 md=HOST spd=FULL
(12Mbps) pwr=ON
bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0200
Hi,
I am writing a port [1] to control the Lego NXT brick with ROS, but when
I run a test program it fails (permissions for the USB device are 666).
This is on:
% uname -a
FreeBSD acer 9.0-CURRENT FreeBSD 9.0-CURRENT #5 r216351M: Fri Dec 10
14:13:33 CET 2010
Andrew Thompson thom...@freebsd.org wrote:
On 13 December 2010 07:49, Emanuel Haupt eha...@freebsd.org wrote:
Is there any way I can make sure that the following device:
ugen1.3: product 0x6001 vendor 0x0403 at usbus1, cfg=0 md=HOST
spd=FULL (12Mbps) pwr=ON
bLength = 0x0012
Hans Petter Selasky hsela...@c2i.net wrote:
On Sunday 12 December 2010 19:49:24 Emanuel Haupt wrote:
Is there any way I can make sure that the following device:
ugen1.3: product 0x6001 vendor 0x0403 at usbus1, cfg=0 md=HOST
spd=FULL (12Mbps) pwr=ON
bLength = 0x0012