On 11/26/20 8:13 PM, Thomas Steen Rasmussen wrote:
Anyway, since the APU only has the two external USB plugs I've been
using, and that is the machine I need this to work on, this doesn't help
a lot unfortunately. But it is a data point at least.
/Thomas
Hello again,
OK, so I will have to
On 11/26/20 5:05 PM, Thomas Steen Rasmussen wrote:
I see. What does this mean?
Since the same problem is also on different computer, intel instead of AMD.
Same problem also occurred when I replaced one of the webcams with a
different model.
It isn't clear to me whether this is a
On 11/26/20 4:43 PM, Hans Petter Selasky wrote:
Hi,
xhci_interrupt_poll: event[21] = 33 (0x0001002f8e50 0x0500
0x02008400)
xhci_check_command: Received command event
xhci_configure_reset_endpoint: Could not stop endpoint 9
xhci_interrupt_poll: event[22] = 33 (0x0001002f8e60
On 11/26/20 4:36 PM, Thomas Steen Rasmussen wrote:
On 11/26/20 4:26 PM, Thomas Steen Rasmussen wrote:
On 11/26/20 4:08 PM, Hans Petter Selasky wrote:
On 11/26/20 3:38 PM, Thomas Steen Rasmussen wrote:
I tried swapping the webcams around, the error is always with the
second webcam connected
Hi,
xhci_interrupt_poll: event[21] = 33 (0x0001002f8e50 0x0500 0x02008400)
xhci_check_command: Received command event
xhci_configure_reset_endpoint: Could not stop endpoint 9
xhci_interrupt_poll: event[22] = 33 (0x0001002f8e60 0x0500 0x02008400)
xhci_check_command: Received
On 11/26/20 4:26 PM, Thomas Steen Rasmussen wrote:
On 11/26/20 4:08 PM, Hans Petter Selasky wrote:
On 11/26/20 3:38 PM, Thomas Steen Rasmussen wrote:
I tried swapping the webcams around, the error is always with the
second webcam connected (so video2), regardless of which webcam it is.
Hi,
On 11/26/20 4:08 PM, Hans Petter Selasky wrote:
On 11/26/20 3:38 PM, Thomas Steen Rasmussen wrote:
I tried swapping the webcams around, the error is always with the
second webcam connected (so video2), regardless of which webcam it is.
Hi,
Might be a bug in the XHCI controller driver or XHCI
On 11/26/20 3:38 PM, Thomas Steen Rasmussen wrote:
I tried swapping the webcams around, the error is always with the second
webcam connected (so video2), regardless of which webcam it is.
Hi,
Might be a bug in the XHCI controller driver or XHCI HW, that the
isochronous transactions don't get
On 11/26/20 3:20 PM, Hans Petter Selasky wrote:
Try running webcamd in the foreground, and see if there are any errors
output there aswell. Like request for firmware.
I now have webcamd running for both webcams in the foreground, no
errors, almost the same output except the video device
Also try to switch the enumeration order.
Is it always the same webcam that doesn't work?
Or only /dev/video2 ?
--HPS
___
freebsd-usb@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to
On 11/26/20 3:13 PM, Thomas Steen Rasmussen wrote:
14:05:25.408143 usbus0.3
SUBM-ISOC-EP=0084,SPD=HIGH,NFR=128,SLEN=0,IVAL=0
14:05:25.654017 usbus0.3
DONE-ISOC-EP=0084,SPD=HIGH,NFR=0,SLEN=0,IVAL=0,ERR=TIMEOUT
14:05:25.654030 usbus0.3
On 11/26/20 2:49 PM, Hans Petter Selasky wrote:
On 11/26/20 2:34 PM, Thomas Steen Rasmussen wrote:
On 11/26/20 1:18 PM, Hans Petter Selasky wrote:
Hi Thomas,
Try setting the resolution or framerate down, because high resolution
webcams need a lot of USB bandwidth!
Hi,
Hi :)
Try
On 11/26/20 2:34 PM, Thomas Steen Rasmussen wrote:
On 11/26/20 1:18 PM, Hans Petter Selasky wrote:
Hi Thomas,
Try setting the resolution or framerate down, because high resolution
webcams need a lot of USB bandwidth!
Hi,
Hi,
Thanks for the reply. How can I set the resolution or
On 11/26/20 1:18 PM, Hans Petter Selasky wrote:
Hi Thomas,
Try setting the resolution or framerate down, because high resolution
webcams need a lot of USB bandwidth!
Hi,
Thanks for the reply. How can I set the resolution or framerate lower?
I first connect both webcams, and then try
On 11/26/20 1:04 PM, Thomas Steen Rasmussen via freebsd-usb wrote:
Hello USB friends :)
I am having a hard time trying to get two webcams working simultaneously
on FreeBSD 12.2-STABLE r367109 GENERIC amd64.
Each webcam works by itself, for example when taking a snapshot with
pwcview:
sudo
15 matches
Mail list logo
