asigning an address,
and then 'ping -n 192.168.1.1'ing for four seconds.
Maybe Pyun YongHyeon should have a look at this.
And you are running the latest current?
I updated to -current as of about an hour or two ago.
PS. Please CC to me I'm not subscribed to the list
On Thu, Feb 12, 2009 at 12:59:13PM +0900, Hiroharu Tamaru wrote:
I've just sent another message before reading this.
At Thu, 12 Feb 2009 12:42:51 +0900, Pyun YongHyeon wrote:
On Thu, Feb 12, 2009 at 11:37:23AM +0900, Pyun YongHyeon wrote:
On Thu, Feb 12, 2009 at 01:51:47AM +0900, Hiroharu
On Wed, Feb 11, 2009 at 07:57:52PM -0800, Andrew Thompson wrote:
On Thu, Feb 12, 2009 at 12:42:51PM +0900, Pyun YongHyeon wrote:
I have the same USB controller and latest CURRENT works.
axe0: ASIX Electronics AX88178, rev 2.00/0.01, addr 4 on usbus1
axe0: PHYADDR 0xe0:0x18
Hi,
Traditionally axe(4) didn't support reprogramming station address
(node id) as datasheet does not mention the required command.
However AX88178 datasheet has the command and it seems the command
works as expected. I've attached patch which will enable changing
ethernet address of the
On Wed, Sep 16, 2009 at 11:55:04PM +0200, Hans Petter Selasky wrote:
Hi,
Can you send me the patch.
Sure.
Seems like the list software stripped it off.
--HPS
On Wednesday 16 September 2009 20:52:56 Pyun YongHyeon wrote:
Hi,
Traditionally axe(4) didn't support reprogramming
On Fri, Sep 18, 2009 at 12:06:57AM +0900, Norikatsu Shigemura wrote:
Hi pyun!
On Mon, 14 Sep 2009 12:37:22 -0700
Pyun YongHyeon pyu...@gmail.com wrote:
I submitted axe(4) performance patch to Hans and he committed the
patch to P4.
http://perforce.freebsd.org/chv.cgi?CH=168457
I
On Thu, Nov 26, 2009 at 08:40:04AM +, Hans Petter Selasky wrote:
The following reply was made to PR usb/140883; it has been noted by GNATS.
From: Hans Petter Selasky hsela...@c2i.net
To: freebsd-usb@freebsd.org
Cc: sub mesa sub.m...@gmail.com,
freebsd-gnats-sub...@freebsd.org
Subject:
On Sun, Nov 29, 2009 at 02:50:03AM +, Brett Glass wrote:
The following reply was made to PR usb/140883; it has been noted by GNATS.
From: Brett Glass br...@lariat.net
To: bug-follo...@freebsd.org
Cc: sub.m...@gmail.com
Subject: Re: usb/140883: [axe] USB gigabit ethernet hangs after
On Sun, Nov 29, 2009 at 04:51:09PM -0700, Brett Glass wrote:
At 02:38 PM 11/29/2009, Pyun YongHyeon wrote:
I'm not sure buffer size allowed in driver is 4K. Long time ago I
increased Rx buffer size to 16KB from 2KB for 88178/88772. That
change was essential to get 220Mbps for 88178/88772
On Sun, Nov 29, 2009 at 05:03:44PM -0700, Brett Glass wrote:
At 02:23 PM 11/29/2009, Pyun YongHyeon wrote:
I think the large number of interrupts has nothing to do with
axe(4). Almost all USB ethernet controllers are poorly designed
to save cost so you can't expect reasonable performance
,
what else could i try to identify the problem or is there any other
information you require to diagnose this issue?
Thanks for looking into it!
Kind regards,
sub
On 11/29/09, Pyun YongHyeon pyu...@gmail.com wrote:
On Thu, Nov 26, 2009 at 08:40:04AM +, Hans Petter Selasky wrote
On Mon, Mar 01, 2010 at 04:22:47PM -0300, Nenhum_de_Nos wrote:
On Mon, March 1, 2010 16:10, Pyun YongHyeon wrote:
On Mon, Mar 01, 2010 at 03:57:02PM -0300, Nenhum_de_Nos wrote:
hail,
I need an usb nic that is able to push more then 10Mbps on wire. if is
altq capable better
On Tue, Mar 23, 2010 at 12:13:26AM -0300, Nenhum_de_Nos wrote:
On Mon, March 22, 2010 23:29, Nenhum_de_Nos wrote:
On Mon, March 1, 2010 16:10, Pyun YongHyeon wrote:
On Mon, Mar 01, 2010 at 03:57:02PM -0300, Nenhum_de_Nos wrote:
hail,
I need an usb nic that is able to push more
On Wed, Mar 24, 2010 at 06:16:21PM -0300, Nenhum_de_Nos wrote:
On Tue, March 23, 2010 22:01, Pyun YongHyeon wrote:
[...]
Just adding info, I keep getting these outputs from ifconfig:
ue0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu
1500
ether 00:11:50:e7:39:e9
On Wed, Mar 24, 2010 at 02:42:30PM -0700, Pyun YongHyeon wrote:
On Wed, Mar 24, 2010 at 06:16:21PM -0300, Nenhum_de_Nos wrote:
On Tue, March 23, 2010 22:01, Pyun YongHyeon wrote:
[...]
Just adding info, I keep getting these outputs from ifconfig:
ue0: flags=8843UP,BROADCAST
On Wed, Mar 24, 2010 at 02:58:27PM -0700, Pyun YongHyeon wrote:
On Wed, Mar 24, 2010 at 02:42:30PM -0700, Pyun YongHyeon wrote:
On Wed, Mar 24, 2010 at 06:16:21PM -0300, Nenhum_de_Nos wrote:
On Tue, March 23, 2010 22:01, Pyun YongHyeon wrote:
[...]
Just adding info, I keep
On Thu, Mar 25, 2010 at 04:42:19PM -0300, Nenhum_de_Nos wrote:
On Thu, March 25, 2010 14:35, Pyun YongHyeon wrote:
On Thu, Mar 25, 2010 at 02:22:32PM -0300, Nenhum_de_Nos wrote:
On Wed, March 24, 2010 20:18, Pyun YongHyeon wrote:
On Wed, Mar 24, 2010 at 02:58:27PM -0700, Pyun YongHyeon
On Thu, Mar 25, 2010 at 09:57:22PM -0300, Nenhum_de_Nos wrote:
[...]
miibus1: MII bus on axe0
ukphy0: Generic IEEE 802.3u media interface PHY 1 on miibus1
ukphy0: XXX ID1 = 0x7949, ID2 = 0x7949
This value looks garbage.
:(
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
On Fri, Mar 26, 2010 at 11:03:50PM -0300, Nenhum_de_Nos wrote:
On Fri, March 26, 2010 16:50, Pyun YongHyeon wrote:
On Thu, Mar 25, 2010 at 09:57:22PM -0300, Nenhum_de_Nos wrote:
[...]
miibus1: MII bus on axe0
ukphy0: Generic IEEE 802.3u media interface PHY 1 on miibus1
ukphy0
On Fri, Mar 26, 2010 at 11:31:50PM -0300, Nenhum_de_Nos wrote:
[...]
I changed and got this:
miibus1: MII bus on axe0
ukphy0: Generic IEEE 802.3u media interface PHY 1 on miibus1
ukphy0: XXX ID1 = 0x0282, ID2 = 0xf012
^^
This is *NOT* bogus
On Sat, Apr 03, 2010 at 09:46:59PM -0300, Nenhum_de_Nos wrote:
On Wed, 31 Mar 2010 12:06:31 -0700
Pyun YongHyeon pyu...@gmail.com wrote:
On Fri, Mar 26, 2010 at 11:31:50PM -0300, Nenhum_de_Nos wrote:
[...]
I changed and got this:
miibus1: MII bus on axe0
ukphy0
On Sun, Apr 04, 2010 at 06:12:56PM -0700, Pyun YongHyeon wrote:
On Sat, Apr 03, 2010 at 09:46:59PM -0300, Nenhum_de_Nos wrote:
On Wed, 31 Mar 2010 12:06:31 -0700
Pyun YongHyeon pyu...@gmail.com wrote:
On Fri, Mar 26, 2010 at 11:31:50PM -0300, Nenhum_de_Nos wrote:
[...]
I
On Mon, Apr 12, 2010 at 05:52:55PM -0700, Pyun YongHyeon wrote:
On Sun, Apr 04, 2010 at 06:12:56PM -0700, Pyun YongHyeon wrote:
On Sat, Apr 03, 2010 at 09:46:59PM -0300, Nenhum_de_Nos wrote:
On Wed, 31 Mar 2010 12:06:31 -0700
Pyun YongHyeon pyu...@gmail.com wrote:
On Fri, Mar 26
On Tue, Jul 20, 2010 at 04:10:03PM +, Derrick Brashear wrote:
The following reply was made to PR usb/140883; it has been noted by GNATS.
From: Derrick Brashear sha...@gmail.com
To: bug-follo...@freebsd.org
Cc:
Subject: Re: usb/140883: [axe] [usb8] USB gigabit ethernet hangs after
Hi,
I don't know how long it had been there but it seems current USB
stack does not honor fairness of TX/RX on USB ethernet controller.
Unidirectional performance test(UDP) or most-unidirectional
performance(TCP) test works well without problems. However if heavy
TX/RX traffic hits controller at
On Sat, Oct 02, 2010 at 08:41:57AM +0200, Hans Petter Selasky wrote:
On Saturday 02 October 2010 02:11:00 Pyun YongHyeon wrote:
Hi,
I don't know how long it had been there but it seems current USB
stack does not honor fairness of TX/RX on USB ethernet controller.
Unidirectional
On Sun, Oct 03, 2010 at 08:33:39PM -0700, Julian Elischer wrote:
On 10/3/10 4:54 PM, Pyun YongHyeon wrote:
On Sat, Oct 02, 2010 at 08:41:57AM +0200, Hans Petter Selasky wrote:
On Saturday 02 October 2010 02:11:00 Pyun YongHyeon wrote:
Hi,
I don't know how long it had been
On Mon, Oct 04, 2010 at 09:54:18PM +0200, Hans Petter Selasky wrote:
Personally I'd like to nuke the use of interrupt endpoint here but
want to hear Han's opinion before doing that.
If no data is ever transmitted except zero length packets, you can just nuke
it.
Controller always
On Tue, Oct 05, 2010 at 11:39:33AM -0700, Mark Atkinson wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 10/05/2010 10:09, Mark Atkinson wrote:
Root mount waiting for: usbus3 usbus0
[hang, waits forever...]
Well reverting to r213377 exhibits similar behavior, so I guess this
On Sun, Oct 03, 2010 at 04:54:23PM -0700, Pyun YongHyeon wrote:
On Sat, Oct 02, 2010 at 08:41:57AM +0200, Hans Petter Selasky wrote:
[...]
USB EHCI uses round robin, so this is either USB device problem or a test-
program software failure.
I'm pretty sure the benchmark program
On Thu, Nov 18, 2010 at 04:20:51PM -0200, Nenhum_de_Nos wrote:
On Thu, November 18, 2010 13:10, Derrick Brashear wrote:
The following reply was made to PR usb/140883; it has been noted by GNATS.
From: Derrick Brashear sha...@gmail.com
To: bug-follo...@freebsd.org, sub.m...@gmail.com
On Thu, Nov 18, 2010 at 09:12:13PM -0200, Nenhum_de_Nos wrote:
On Thu, November 18, 2010 18:24, Pyun YongHyeon wrote:
On Thu, Nov 18, 2010 at 04:20:51PM -0200, Nenhum_de_Nos wrote:
On Thu, November 18, 2010 13:10, Derrick Brashear wrote:
The following reply was made to PR usb/140883
On Thu, Nov 18, 2010 at 10:40:10PM -0200, Nenhum_de_Nos wrote:
On Thu, November 18, 2010 22:06, Pyun YongHyeon wrote:
On Thu, Nov 18, 2010 at 09:12:13PM -0200, Nenhum_de_Nos wrote:
On Thu, November 18, 2010 18:24, Pyun YongHyeon wrote:
On Thu, Nov 18, 2010 at 04:20:51PM -0200
On Fri, Nov 19, 2010 at 03:19:26AM -0200, Nenhum_de_Nos wrote:
On Thu, November 18, 2010 23:38, Pyun YongHyeon wrote:
On Thu, Nov 18, 2010 at 10:40:10PM -0200, Nenhum_de_Nos wrote:
On Thu, November 18, 2010 22:06, Pyun YongHyeon wrote:
On Thu, Nov 18, 2010 at 09:12:13PM -0200
On Fri, Nov 19, 2010 at 04:23:20PM -0200, Nenhum_de_Nos wrote:
On Fri, November 19, 2010 15:13, Pyun YongHyeon wrote:
On Fri, Nov 19, 2010 at 03:19:26AM -0200, Nenhum_de_Nos wrote:
On Thu, November 18, 2010 23:38, Pyun YongHyeon wrote:
On Thu, Nov 18, 2010 at 10:40:10PM -0200
On Fri, Nov 19, 2010 at 06:23:50PM -0200, Nenhum_de_Nos wrote:
[...]
Ok, try again after downloading new if_axe.c and let me know
the output EEPROM data : 0xXX, phymode : 0xXX shown on your
console.
never got to see that message. I saw the diff to previous version, and did
boot into
On Fri, Nov 19, 2010 at 07:49:57PM -0200, Nenhum_de_Nos wrote:
On Fri, November 19, 2010 19:23, Pyun YongHyeon wrote:
On Fri, Nov 19, 2010 at 06:23:50PM -0200, Nenhum_de_Nos wrote:
[...]
Ok, try again after downloading new if_axe.c and let me know
the output EEPROM data : 0xXX
On Fri, Nov 19, 2010 at 08:30:54PM -0200, Nenhum_de_Nos wrote:
On Fri, November 19, 2010 20:07, Nenhum_de_Nos wrote:
On Fri, November 19, 2010 20:02, Pyun YongHyeon wrote:
On Fri, Nov 19, 2010 at 07:49:57PM -0200, Nenhum_de_Nos wrote:
On Fri, November 19, 2010 19:23, Pyun YongHyeon
On Fri, Nov 19, 2010 at 11:20:25PM -0200, Nenhum_de_Nos wrote:
On Fri, November 19, 2010 22:52, Pyun YongHyeon wrote:
On Fri, Nov 19, 2010 at 08:30:54PM -0200, Nenhum_de_Nos wrote:
On Fri, November 19, 2010 20:07, Nenhum_de_Nos wrote:
On Fri, November 19, 2010 20:02, Pyun YongHyeon
39 matches
Mail list logo
