Re: bhyve /Xen
Hi Dustin, I'm running 2016 (both Standard and Essentials) under 12-CURRENT bhyve without any obvious issues other than it's acting a lot slower than it should be. However I'm not entirely sure that it's a bhyve issue. Any perf issues in particular ? network/disk ? I have noticed networking performance on the same h/w as other guests with virtio isn't so good (e.g. iperf3 results). later, Peter. ___ freebsd-virtualization@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-virtualization To unsubscribe, send any mail to "freebsd-virtualization-unsubscr...@freebsd.org"
Re: bhyve /Xen
On Mon, Jan 16, 2017 at 11:46:21AM +, Matt Churchyard wrote: > On Sun, Jan 15, 2017 at 10:16:33PM -0500, Jeremy Faulkner wrote: > > > > > > On 2017-01-15 5:45 PM, The Doctor wrote: > > >>> 2) Windows 2016 and bhyve > > >>> > > >>> > > >>> Why can Widnows 2016 rpc not work with bhyve? > > >> > > >> Can you describe the case that isn't working ? (to get a repro) > > > > > > Under VNC you can log in but not under rpc. > > > > > > Anyone else running Win 2016 in FreeBSD 11 bhyve? > > > > > > > You are using RDP to the guest's ip not the FreeBSD bhyve host's ip > > address correct? Bhyve provides VNC on the bhyve host's ip, no RDP. > > > AFAIK both IPs are the smae. > > Bhyve provides a VNC server which allows you to access the guest console. > This listens on all interfaces/IP addresses on the bhyve host by default > (unless you specify an address in the bhyve command line). This has nothing > to do with RDP. > > If you want to connect via RDP you'll need to make sure networking is > configured and working in the Windows guest, and that RDP in enabled in > Windows system settings. You then RDP to the IP address of the Windows > machine. The Windows guest will not have the same IP address as the bhyve > host. > > If you're using NAT on the bhyve host then it's a bit more complicated as > you'll need to decide on a way of getting access to the guest (most obvious > way is by forwarding the RDP port on the bhyve host). > > Also note that RDP and RPC are two different things > > Matt Then I might be doing something different than the expected. 1) I set up my bridges and my taps and IP then according (I have a /24) 2) I associate all the taps with an IP Address. 3) I install the VM using UEFI method on. 4) using VNC I make certain the VM is working accordingly. So Linuxes such as Fedora, Centos, Debian and Ubuntu are working using ssh and VNC Windows 2016 OTOH is working using VNC but not using Remote Desktop. It acts as if the password I assigned to local box is not the same on RDP/RPC . -- Member - Liberal International This is doctor@@nl2k.ab.ca Ici doctor@@nl2k.ab.ca God,Queen and country!Never Satan President Republic!Beware AntiChrist rising! http://www.fullyfollow.me/rootnl2k Look at Psalms 14 and 53 on Atheism Birthdate 29 Jan 1969 Redhill Surrey England ___ freebsd-virtualization@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-virtualization To unsubscribe, send any mail to "freebsd-virtualization-unsubscr...@freebsd.org"
RE: bhyve /Xen
On Sun, Jan 15, 2017 at 10:16:33PM -0500, Jeremy Faulkner wrote: > > > On 2017-01-15 5:45 PM, The Doctor wrote: > >>> 2) Windows 2016 and bhyve > >>> > >>> > >>> Why can Widnows 2016 rpc not work with bhyve? > >> > >> Can you describe the case that isn't working ? (to get a repro) > > > > Under VNC you can log in but not under rpc. > > > > Anyone else running Win 2016 in FreeBSD 11 bhyve? > > > > You are using RDP to the guest's ip not the FreeBSD bhyve host's ip > address correct? Bhyve provides VNC on the bhyve host's ip, no RDP. > AFAIK both IPs are the smae. Bhyve provides a VNC server which allows you to access the guest console. This listens on all interfaces/IP addresses on the bhyve host by default (unless you specify an address in the bhyve command line). This has nothing to do with RDP. If you want to connect via RDP you'll need to make sure networking is configured and working in the Windows guest, and that RDP in enabled in Windows system settings. You then RDP to the IP address of the Windows machine. The Windows guest will not have the same IP address as the bhyve host. If you're using NAT on the bhyve host then it's a bit more complicated as you'll need to decide on a way of getting access to the guest (most obvious way is by forwarding the RDP port on the bhyve host). Also note that RDP and RPC are two different things Matt ___ freebsd-virtualization@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-virtualization To unsubscribe, send any mail to "freebsd-virtualization-unsubscr...@freebsd.org"
Re: bhyve /Xen
On Sun, Jan 15, 2017 at 10:16:33PM -0500, Jeremy Faulkner wrote: > > > On 2017-01-15 5:45 PM, The Doctor wrote: > >>> 2) Windows 2016 and bhyve > >>> > >>> > >>> Why can Widnows 2016 rpc not work with bhyve? > >> > >> Can you describe the case that isn't working ? (to get a repro) > > > > Under VNC you can log in but not under rpc. > > > > Anyone else running Win 2016 in FreeBSD 11 bhyve? > > > > You are using RDP to the guest's ip not the FreeBSD bhyve host's ip > address correct? Bhyve provides VNC on the bhyve host's ip, no RDP. AFAIK both IPs are the smae. > > Jeremy > ___ > freebsd-virtualization@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-virtualization > To unsubscribe, send any mail to > "freebsd-virtualization-unsubscr...@freebsd.org" -- Member - Liberal International This is doctor@@nl2k.ab.ca Ici doctor@@nl2k.ab.ca God,Queen and country!Never Satan President Republic!Beware AntiChrist rising! http://www.fullyfollow.me/rootnl2k Look at Psalms 14 and 53 on Atheism Birthdate 29 Jan 1969 Redhill Surrey England ___ freebsd-virtualization@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-virtualization To unsubscribe, send any mail to "freebsd-virtualization-unsubscr...@freebsd.org"
Re: bhyve /Xen
On 2017-01-15 5:45 PM, The Doctor wrote: 2) Windows 2016 and bhyve Why can Widnows 2016 rpc not work with bhyve? Can you describe the case that isn't working ? (to get a repro) Under VNC you can log in but not under rpc. Anyone else running Win 2016 in FreeBSD 11 bhyve? You are using RDP to the guest's ip not the FreeBSD bhyve host's ip address correct? Bhyve provides VNC on the bhyve host's ip, no RDP. Jeremy ___ freebsd-virtualization@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-virtualization To unsubscribe, send any mail to "freebsd-virtualization-unsubscr...@freebsd.org"
Re: bhyve /Xen
On Sun, 15 Jan 2017 16:45:41 -0600, The Doctor wrote: Under VNC you can log in but not under rpc. Anyone else running Win 2016 in FreeBSD 11 bhyve? I'm running FreeBSD 12-CURRENT, just like another user who has responded. I put Windows Server 2016 x64 eval on a VM this morning. I ran into an issue where the VirtIO network driver designed for Windows 2016 from the 0.1.126 release of the virtio-win ISO. I used the 2012R2 network driver from the 0.1.118 version of virtio, and it fired up perfectly. RDP and other services I've tried are working. -Joe ___ freebsd-virtualization@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-virtualization To unsubscribe, send any mail to "freebsd-virtualization-unsubscr...@freebsd.org"
Re: bhyve /Xen
On Mon, Jan 16, 2017 at 11:55:52AM +1100, Jason Tubnor wrote: > On 16 January 2017 at 09:45, The Doctor wrote: > > > > > Seems that yes 6 Vms are running and are crashing at the same time. > > > > > > > > 2) Windows 2016 and bhyve > > > > > > > > > > > > Why can Widnows 2016 rpc not work with bhyve? > > > > > > Can you describe the case that isn't working ? (to get a repro) > > > > Under VNC you can log in but not under rpc. > > > > Anyone else running Win 2016 in FreeBSD 11 bhyve? > > > > > Yes, 2012R2 and 2016. Can RDP to both hosts without issues. > > Cheers, > > Jason. I am using 2016 stanrder and Datacenter Evalutaion mode. -- Member - Liberal International This is doctor@@nl2k.ab.ca Ici doctor@@nl2k.ab.ca God,Queen and country!Never Satan President Republic!Beware AntiChrist rising! http://www.fullyfollow.me/rootnl2k Look at Psalms 14 and 53 on Atheism Birthdate 29 Jan 1969 Redhill Surrey England ___ freebsd-virtualization@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-virtualization To unsubscribe, send any mail to "freebsd-virtualization-unsubscr...@freebsd.org"
Re: bhyve /Xen
On 16 January 2017 at 09:45, The Doctor wrote: > > > Seems that yes 6 Vms are running and are crashing at the same time. > > > > > > 2) Windows 2016 and bhyve > > > > > > > > > Why can Widnows 2016 rpc not work with bhyve? > > > > Can you describe the case that isn't working ? (to get a repro) > > Under VNC you can log in but not under rpc. > > Anyone else running Win 2016 in FreeBSD 11 bhyve? > > Yes, 2012R2 and 2016. Can RDP to both hosts without issues. Cheers, Jason. ___ freebsd-virtualization@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-virtualization To unsubscribe, send any mail to "freebsd-virtualization-unsubscr...@freebsd.org"
Re: bhyve /Xen
On Mon, Jan 16, 2017 at 12:45:16AM +, Dustin Marquess wrote: > I'm running 2016 (both Standard and Essentials) under 12-CURRENT bhyve > without any obvious issues other than it's acting a lot slower than it should > be. However I'm not entirely sure that it's a bhyve issue. > > -Dustin > > > And what about under 11 can you RPC in? And please NEVER Top post! > > On Sun, Jan 15, 2017 at 4:46 PM -0600, "The Doctor" > wrote: > > > > > > > > > > > On Sun, Jan 15, 2017 at 12:14:19PM -0800, Peter Grehan wrote: > > Hi, > > > > > 1) What do I need to send a bhyve crashing report? > > > > This list is fine, or you can file a PR against FreeBSD (you need to > > create an account for that, https://bugs.freebsd.org/bugzilla/enter_bug.cgi) > > Using gdb, what information is needed? > > > > > > Seems that yes 6 Vms are running and are crashing at the same time. > > > > > > 2) Windows 2016 and bhyve > > > > > > > > > Why can Widnows 2016 rpc not work with bhyve? > > > > Can you describe the case that isn't working ? (to get a repro) > > Under VNC you can log in but not under rpc. > > Anyone else running Win 2016 in FreeBSD 11 bhyve? > > > > > > 3) Bhyve to Xen . > > > > > > Is there an easy way to migrate from bhyve to Xen on FreeBSD 11 ? > > > > You should be able to boot a guest disk image created for bhyve under Xen. > > > > later, > > > > Peter. > > > > -- > Member - Liberal International This is doctor@@nl2k.ab.ca Ici > doctor@@nl2k.ab.ca > God,Queen and country!Never Satan President Republic!Beware AntiChrist > rising! > http://www.fullyfollow.me/rootnl2k Look at Psalms 14 and 53 on Atheism > Birthdate 29 Jan 1969 Redhill Surrey England > ___ > freebsd-virtualization@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-virtualization > To unsubscribe, send any mail to > "freebsd-virtualization-unsubscr...@freebsd.org" > > > > > -- Member - Liberal International This is doctor@@nl2k.ab.ca Ici doctor@@nl2k.ab.ca God,Queen and country!Never Satan President Republic!Beware AntiChrist rising! http://www.fullyfollow.me/rootnl2k Look at Psalms 14 and 53 on Atheism Birthdate 29 Jan 1969 Redhill Surrey England ___ freebsd-virtualization@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-virtualization To unsubscribe, send any mail to "freebsd-virtualization-unsubscr...@freebsd.org"
Re: bhyve /Xen
I'm running 2016 (both Standard and Essentials) under 12-CURRENT bhyve without any obvious issues other than it's acting a lot slower than it should be. However I'm not entirely sure that it's a bhyve issue. -Dustin On Sun, Jan 15, 2017 at 4:46 PM -0600, "The Doctor" wrote: On Sun, Jan 15, 2017 at 12:14:19PM -0800, Peter Grehan wrote: > Hi, > > > 1) What do I need to send a bhyve crashing report? > > This list is fine, or you can file a PR against FreeBSD (you need to > create an account for that, https://bugs.freebsd.org/bugzilla/enter_bug.cgi) Using gdb, what information is needed? > > > Seems that yes 6 Vms are running and are crashing at the same time. > > > > 2) Windows 2016 and bhyve > > > > > > Why can Widnows 2016 rpc not work with bhyve? > > Can you describe the case that isn't working ? (to get a repro) Under VNC you can log in but not under rpc. Anyone else running Win 2016 in FreeBSD 11 bhyve? > > > 3) Bhyve to Xen . > > > > Is there an easy way to migrate from bhyve to Xen on FreeBSD 11 ? > > You should be able to boot a guest disk image created for bhyve under Xen. > > later, > > Peter. > -- Member - Liberal International This is doctor@@nl2k.ab.ca Ici doctor@@nl2k.ab.ca God,Queen and country!Never Satan President Republic!Beware AntiChrist rising! http://www.fullyfollow.me/rootnl2k Look at Psalms 14 and 53 on Atheism Birthdate 29 Jan 1969 Redhill Surrey England ___ freebsd-virtualization@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-virtualization To unsubscribe, send any mail to "freebsd-virtualization-unsubscr...@freebsd.org" ___ freebsd-virtualization@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-virtualization To unsubscribe, send any mail to "freebsd-virtualization-unsubscr...@freebsd.org"
Re: bhyve /Xen
On Sun, Jan 15, 2017 at 12:14:19PM -0800, Peter Grehan wrote: > Hi, > > > 1) What do I need to send a bhyve crashing report? > > This list is fine, or you can file a PR against FreeBSD (you need to > create an account for that, https://bugs.freebsd.org/bugzilla/enter_bug.cgi) Using gdb, what information is needed? > > > Seems that yes 6 Vms are running and are crashing at the same time. > > > > 2) Windows 2016 and bhyve > > > > > > Why can Widnows 2016 rpc not work with bhyve? > > Can you describe the case that isn't working ? (to get a repro) Under VNC you can log in but not under rpc. Anyone else running Win 2016 in FreeBSD 11 bhyve? > > > 3) Bhyve to Xen . > > > > Is there an easy way to migrate from bhyve to Xen on FreeBSD 11 ? > > You should be able to boot a guest disk image created for bhyve under Xen. > > later, > > Peter. > -- Member - Liberal International This is doctor@@nl2k.ab.ca Ici doctor@@nl2k.ab.ca God,Queen and country!Never Satan President Republic!Beware AntiChrist rising! http://www.fullyfollow.me/rootnl2k Look at Psalms 14 and 53 on Atheism Birthdate 29 Jan 1969 Redhill Surrey England ___ freebsd-virtualization@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-virtualization To unsubscribe, send any mail to "freebsd-virtualization-unsubscr...@freebsd.org"
Re: bhyve /Xen
Hi, 1) What do I need to send a bhyve crashing report? This list is fine, or you can file a PR against FreeBSD (you need to create an account for that, https://bugs.freebsd.org/bugzilla/enter_bug.cgi) Seems that yes 6 Vms are running and are crashing at the same time. 2) Windows 2016 and bhyve Why can Widnows 2016 rpc not work with bhyve? Can you describe the case that isn't working ? (to get a repro) 3) Bhyve to Xen . Is there an easy way to migrate from bhyve to Xen on FreeBSD 11 ? You should be able to boot a guest disk image created for bhyve under Xen. later, Peter. ___ freebsd-virtualization@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-virtualization To unsubscribe, send any mail to "freebsd-virtualization-unsubscr...@freebsd.org"
