it's a userland program. :-) All ath3k in linux does is detect the hardware
and squeeze firmware into it. That's literally it.
-adrian
On Sun, 14 Apr 2019 at 21:48, Matthias Apitz wrote:
> El día domingo, abril 14, 2019 a las 09:42:46a. m. -0700, Adrian Chadd
> escribió:
>
> > no, it's the use
El día domingo, abril 14, 2019 a las 09:42:46a. m. -0700, Adrian Chadd escribió:
> no, it's the userland ath3kfw tool from my git (github.com/erikarn/ath3k)
>
> Those NICs need firmware/config squirted onto them after ath(4) loads and
> sets up the btcoex.
>
>
I git cloned it and built it, but
To view an individual PR, use:
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=(Bug Id).
The following is a listing of current problems submitted by FreeBSD users,
which need special attention. These represent problem reports covering
all versions including experimental development code and ob
no, it's the userland ath3kfw tool from my git (github.com/erikarn/ath3k)
Those NICs need firmware/config squirted onto them after ath(4) loads and
sets up the btcoex.
-adrian
On Sun, 14 Apr 2019 at 09:38, Matthias Apitz wrote:
> El día domingo, abril 14, 2019 a las 09:18:18a. m. -0700, Adria
El día domingo, abril 14, 2019 a las 09:18:18a. m. -0700, Adrian Chadd escribió:
> ok, so you've added the WB222 coex bits. Does ath3k load OK?
>
I do not have this module:
root@c720-r342378:/home/guru # uname -a
FreeBSD c720-r342378 13.0-CURRENT FreeBSD 13.0-CURRENT GENERIC amd64
root@c720-r3
ok, so you've added the WB222 coex bits. Does ath3k load OK?
-a
On Sun, 14 Apr 2019 at 09:02, Matthias Apitz wrote:
> El día domingo, abril 14, 2019 a las 08:56:52a. m. -0700, Adrian Chadd
> escribió:
>
> > hi!
> >
> > Ok, so there's two parts:
> >
> > * loading in the firmware and/or bt nic
El día domingo, abril 14, 2019 a las 08:56:52a. m. -0700, Adrian Chadd escribió:
> hi!
>
> Ok, so there's two parts:
>
> * loading in the firmware and/or bt nic setup (clock rate, etc) via
> ath3kfw; and
> * bluetooth coex/antenna setup in ath(4).
>
> The latter I can do. The former may require
hi!
Ok, so there's two parts:
* loading in the firmware and/or bt nic setup (clock rate, etc) via
ath3kfw; and
* bluetooth coex/antenna setup in ath(4).
The latter I can do. The former may require USB stack debugging.
Which NIC is in the C720? Ar9485, right?
-adrian
On Sun, 14 Apr 2019 at 0
El día sábado, abril 13, 2019 a las 02:20:06p. m. +, Alexey Dokuchaev
escribió:
> On Fri, Apr 12, 2019 at 05:12:18PM +, Alexey Dokuchaev wrote:
> > I've then rebooted back into FreeBSD. Apparently, this AR3012 hardware
> > is very fragile, it can be easily left in confused state and won'
