Hi,
So the AR5416 and later NICs almost all implement MIMO. The only
exception is the AR9285 which is a 1x1 with the diversity
implementation matching previous (pre-11n) NICs.
Anyway, for MIMO, all the antennas are on by default. So yes, you need
to connect all of the antennas.
If you want to av
On Sat, 2013-01-26 at 20:03 +0100, Marten Vijn wrote:
> On 01/26/2013 07:01 PM, paranormal wrote:
> > Hi list.
> >
> > My system is -STABLE.
> > Since 9.1 MFC, may be a few months earlier, something was happened, and
> > stuck beacon errors make my wifi ap adapter unresponsible again.
> > I have to
Antennas have been replaced two weeks ago.
Now I have only two antennas connected.
I can connect the third, but it would be a different antenna (an old
one).
On Sat, 2013-01-26 at 20:03 +0100, Marten Vijn wrote:
> On 01/26/2013 07:01 PM, paranormal wrote:
> > Hi list.
> >
> > My system is -STABLE.
On Sat, 2013-01-26 at 12:12 -0800, Adrian Chadd wrote:
> Hi!
>
> Try putting it into ht20 mode.
Ok, I'll try.
>
> Do you have all three antennas connected?
>
No, actually two weeks ago I bought three 9dbi antennas, but they don't
fit well and I put only two of them. Is there problem?
I thought
Hi!
Try putting it into ht20 mode.
Do you have all three antennas connected?
Adrian
Sent from my Palm Pre on AT&T
On Jan 26, 2013 10:01 AM, paranormal wrote:
Hi list.
My system is -STABLE.
Since 9.1 MFC, may be a few months earlier, something was happened,
On 01/26/2013 07:01 PM, paranormal wrote:
Hi list.
My system is -STABLE.
Since 9.1 MFC, may be a few months earlier, something was happened, and
stuck beacon errors make my wifi ap adapter unresponsible again.
I have to shutdown my ap once per week.
How to figure it out?
ifconfig:
wlan0: flags
Hi list.
My system is -STABLE.
Since 9.1 MFC, may be a few months earlier, something was happened, and
stuck beacon errors make my wifi ap adapter unresponsible again.
I have to shutdown my ap once per week.
How to figure it out?
ifconfig:
wlan0: flags=8843 metric 0 mtu
1500
ether 00:1e: