Hi list. My system is -STABLE. Since 9.1 MFC, may be a few months earlier, something was happened, and stuck beacon errors make my wifi ap adapter unresponsible again. I have to shutdown my ap once per week.
How to figure it out?
ifconfig:
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
1500
ether 00:1e:58:39:f8:7b
inet 192.168.11.1 netmask 0xfffffff0 broadcast 192.168.11.15
inet 192.168.11.2 netmask 0xffffffff broadcast 192.168.11.2
inet 192.168.11.3 netmask 0xffffffff broadcast 192.168.11.3
inet 192.168.11.4 netmask 0xffffffff broadcast 192.168.11.4
media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng <hostap>
status: running
ssid mbsd channel 3 (2422 MHz 11g ht/40+) bssid 00:1e:58:39:f8:7b
regdomain ETSI indoor ecm authmode OPEN privacy OFF txpower 20
scanvalid 60 protmode CTS ampdulimit 64k ampdudensity 8 shortgi wme
burst dtimperiod 1 -dfs
There were after last adapter hung:
64 Jan 26 17:41:45 mbsd kernel: ath0: stuck beacon; resetting (bmiss
count 4)
65 Jan 26 17:41:45 mbsd kernel: ath0: stuck beacon; resetting (bmiss
count 4)
66 Jan 26 17:41:45 mbsd
kernel:~
67 Jan 26 17:41:45 mbsd kernel: ath0: stuck beacon; resetting (bmiss
count 4)
68 Jan 26 17:41:48 mbsd last message repeated 14
times
69 Jan 26 17:41:48 mbsd
kernel:~
70 Jan 26 17:41:48 mbsd kernel: ath0: stuck beacon; resetting (bmiss
count 4)
71 Jan 26 17:42:02 mbsd last message repeated 62
times
signature.asc
Description: This is a digitally signed message part
