Adrian Chadd adrian.ch...@gmail.com writes:
Look in ath/makefile .. At the bottom. There's clang warning overrides
there. Uncomment them!
Thanks, that did the trick.
___
freebsd-wireless@freebsd.org mailing list
64 bit kernel? 4 gig RAM?
Adrian
On 1 April 2013 08:07, Raphael Kubo da Costa rak...@freebsd.org wrote:
Adrian Chadd adr...@freebsd.org writes:
I've just updated the AR9300 HAL to the March 13 snapshot from QCA.
This includes calibration and TX power calibration changes that may
improve
On 1 April 2013 08:44, Raphael Kubo da Costa rak...@freebsd.org wrote:
Adrian Chadd adr...@freebsd.org writes:
Please reboot with 4GB of RAM configured.
See if that fixes it.
Indeed, booting with hw.physmem=4G makes the connection much more
reliable -- I do see some of those warnings in
On 31 March 2013 15:24, Adrian Chadd adrian.ch...@gmail.com wrote:
The problem isn't contigmalloc, it's making sure that it gets bounced via
the local 32 bits of address space right.
I'll talk with other developers and see what the deal is with 64 bit address
space for 32 bit nics.
Please do
update again again; I just did some TX related changes.
adrian
On 1 April 2013 14:04, Joshua Isom jri...@gmail.com wrote:
I just tested it, the network problem's the same.
On 4/1/2013 3:22 PM, Adrian Chadd wrote:
On 31 March 2013 15:24, Adrian Chadd adrian.ch...@gmail.com wrote:
The
I was the same. I got these two messages, but I'm only assuming it's
related because the val makes me think of the pci id. These were while
using 16GB, and trying an ifconfig scan.
Apr 1 16:32:51 jri kernel: Memory modified after free
0xfe003ce3a000(4096) val=168c000c @
Hello,
I have a question about 802.11n performance for AR9280 ( my card is Ubiquiti
SR71E ) in hostap mode. To measure performance, I'm looking at the download
speeds from my file server (Samba) through a FreeBSD AP to a laptop with
Centrino 6300 (agn 3x3:3).
I see 3-4 MBytes/s on the 2.4 GHz
Hi,
9.x doesn't implement 11n aggregation transmission. It only supports
11n MCS rate transmission (with no aggregation) and 11n RX with MCS
and aggregation.
If you update to -HEAD you should see the performance increase.
Adrian
On 1 April 2013 15:10, Gleb Romanov groma...@hellok.org wrote:
Thanks!
Do you recommend to update everything or only ATH module will be enough?
IE get all the sources and follow
https://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/makeworld.html
Or
Download the ATH sources and make all install ?
Gleb
-Original Message-
From: