Dears
I'm using a beaglebone black to stream video over UDP. I wrote a
software and have tested it using a urtwn device + webcam Logitech C920.
All is connected using a USB hub with external power source. So urtwn
and webcam, both are plugged in the same USB hub. When I plug the hub
and run m
Maybe a electric problem? I'm using a
external power source to USB HUB.
[]'s
-Otacílio
Em 30/08/2016 20:33, Adrian Chadd escreveu:
.. and which chipset? (dmesg | grep urtwn)
-a
On 30 August 2016 at 16:32, Adrian Chadd wrote:
hi,
What's the signal level? (ifconfig -v wlan0 lis
Dears
I wrote these two small programs to help debug a problem that I think I
have found when using urtwn driver in a baglebone black. The problem is
100% reproducible.
In a server machine I run:
serverUDP 2508
In beaglebone black I run:
./clientUDP servername 2508 9216 0
All the times, a
Em 06/09/2016 04:44, Hans Petter Selasky escreveu:
On 09/06/16 06:47, Adrian Chadd wrote:
missing some bus
barriers for ARM or something?
FYI: Most of the USB control and data memory is coherently allocated
and don't need barriers. You can try capturing a trace using usbdump,
of the traffic
Em 06/09/2016 15:01, Hans Petter Selasky escreveu:
On 09/06/16 18:38, Otacílio wrote:
After a lot of messages this appears:
13:04:40.000436 usbus1.2
DONE-BULK-EP=0081,SPD=HIGH,NFR=1,SLEN=384,IVAL=0,ERR=0
13:04:40.000447 usbus1.2
SUBM-BULK-EP=0081,SPD=HIGH,NFR=1,SLEN=0,IVAL=0
urtwn0
Dears
I have a USB dongle that I'm unable to put to work. This is the device desc:
root@squitch:/home/ota # usbconfig -u 0 -a 2 dump_device_desc
ugen0.2: at usbus0, cfg=0 md=HOST
spd=FULL (12Mbps) pwr=ON (160mA)
bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0201
bDeviceClass =
Dears
I'm using a USB wifi dongle to connect my baglebone black. This dongle
uses the driver rtwn/rtwn_usb.
This driver exhibits a very low performance on both, beaglebone and a
Intel Core 2 Duo notebook. With -ht and without -ht on the ficonfig the
performance is something like this:
root
Dears
I'm using a beaglebone to stream videos over wifi. For this, I'm testing
two wifi adapters:
rtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R
run0: MAC/BBP RT5390 (rev 0x0502), RF RT5370 (MIMO 1T1R), address
e8:4e:06:3c:fd:5d
Both adapters works fine at low bit rate (300 Kbps), but when I use a
