Good Morning,
i answer to your questions...i really need NETBIOS over TCP because i'm going
to prepare a spare part for very old machines where my DOS hardware is out of
date and impossible to find, so I had to get a new system configuration but the
closest possible to the original one. The wors
On 9/28/2015 9:31 AM, Marlon Ng wrote:
> Sorry for the late response guys. Hope you'll be patient with me as I
> am not as skilled as you are.
>
> "So if you have a program that works only with LPT1 (and not with a hard
> coded base port address!) will use what ever address is put into
> 0040:0008
Luca:
Just a few suggestions/comments/questions -- don't know if they'll help or not.
Do you really need both IP and NETBIOS? If you don't actually need IP, you
might be able to find a packet driver for your network card and install a
direct NETBIOS-to-packet driver (I suspect one of those exi
On 9/28/2015 10:20 AM, Eric Auer wrote:
> Hi Marlon / Kaye,
>
> to use DEBUG to change what is LPT1, you put the I/O port at
> some memory location (378 for LPT1, 278 for LPT2, 3bc for LPT3)
> which you can do for example like this:
>
> debug
> d 40:08 l 6
>
> This shows you the current settings, e
Hi Marlon / Kaye,
to use DEBUG to change what is LPT1, you put the I/O port at
some memory location (378 for LPT1, 278 for LPT2, 3bc for LPT3)
which you can do for example like this:
debug
d 40:08 l 6
This shows you the current settings, e.g. 78 03 78 02 00 00
if you have LPT1 and LPT2 installe
Hi,
On Mon, Sep 28, 2015 at 11:31 AM, Marlon Ng wrote:
>
> In the meantime, can somebody please give me a straight answer once and for
> all:
>
> 1. Is it or is it not possible to install freedos in a partition of a hard
> drive by using a flash drive (instead of a CD)?
If your computer can boo
Sorry for the late response guys. Hope you'll be patient with me as I am
not as skilled as you are.
"So if you have a program that works only with LPT1 (and not with a hard
coded base port address!) will use what ever address is put into
0040:0008. You can change that address to match what your e
Hi Luca,
based on the earlier communication on sourceforge that you quote,
mainly with Anthony Williams / Rugxulo, I agree that you should
try using some JEMMEX options like X=TEST or I=TEST.
Actually JEMMEX has lots of options, some of which differ from
what you are used to from HIMEM and EMM38
