Hi
I have a custom program that loads into conventional memory.
But in need more than the standard 640kb.
I have 128Mb extended memory.
How can I increase the conventional memory as much as possible?
Thanks
-
Hi!
13-Дек-2006 00:16 [EMAIL PROTECTED] (Richard) wrote to
freedos-user@lists.sourceforge.net:
R I have a custom program that loads into conventional
R memory.
R But in need more than the standard 640kb.
R I have 128Mb extended memory.
R How can I increase the conventional memory as much as
R
Thanks for your help everyone.
I installed the command.com from http://fdos.org/kernel/cmdxms.HEAD.zip
, and it increased my conventional mem to 606k, thanks a lot!
Also, mem /c returns: Invalid parameter - /C
I'm running FreeDOS Beta 8 too, in case that matters. This is on my old thinkpad, which
Here's my autoexec.bat:
...
LOADHIGH C:\FDOS\BIN\CTMOUSE.EXE
You don't need to load high CTMOUSE it'll load high if possible.
Here's my config.sys:
dos=high,noumb
device=C:\FDOS\BIN\HIMEM.EXE
DEVICE=C:\DOS\EMM386.EXE NOEMS I=B000-B7FF
FILES =100
BUFFERS=20
FCBS=4,4
BREAK=ON
Салям!
13-Окт-2005 23:49 [EMAIL PROTECTED] (Jesse Petre) wrote to
freedos-user@lists.sourceforge.net:
JP LOADHIGH C:\FDOS\BIN\CTMOUSE.EXE
Not need.
JP dos=high,noumb
-^
Why?
JP FILES =100
JP BUFFERS=20
JP FCBS=4,4
files 40
fcbs 1
Hello all,
Bernd:
I do not have a modem or network card, just a floppy drive in it. It's just an old thinkpad I play around with.
Diego Arkady:
I'm not even really sure what the settings in config.sys do, I was just searching on google for ways to gain more conventional memory, and copied some
Hey guys,
I was just wondering how I could increase my conventional memory? I'm trying to get Red Baron to run. I'm new to freeDOS, and I'm not sure what the equivalent to mem /c is, but here are some outputs that hopefully will help.:
mem /u from the command line:
Segment Size Name Type
