Hi,
On Thu, Feb 10, 2022 at 4:04 PM Bjorn Andersson
wrote:
>
> > +_edp {
> > + status = "okay";
> > +
> > + vdda-1p2-supply = <_l6b_1p2>;
> > + vdda-0p9-supply = <_l10c_0p8>;
> > + /delete-property/ pinctrl-names;
> > + /delete-property/ pinctrl-0;
>
> If the first device to
On Thu 17 Feb 17:03 PST 2022, Doug Anderson wrote:
> Hi,
>
> On Thu, Feb 10, 2022 at 3:58 AM Sankeerth Billakanti
> wrote:
> >
> > + backlight_3v3_regulator: backlight-3v3-regulator {
> > + compatible = "regulator-fixed";
> > + regulator-name =
Hi,
On Thu, Feb 10, 2022 at 3:58 AM Sankeerth Billakanti
wrote:
>
> + backlight_3v3_regulator: backlight-3v3-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "backlight_3v3_regulator";
> +
> + regulator-min-microvolt =
Hi,
On Thu, Feb 10, 2022 at 3:58 AM Sankeerth Billakanti
wrote:
>
> +_gpios {
> + edp_bl_power: edp-bl-power {
> + pins = "gpio7";
> + function = "normal";
> + qcom,drive-strength = ;
As far as I can tell you're lacking:
#include
...which is
On Thu 10 Feb 05:57 CST 2022, Sankeerth Billakanti wrote:
> Enable the eDP display panel support without HPD on sc7280 platform.
>
> Signed-off-by: Sankeerth Billakanti
> ---
>
> Changes in v4:
> - Create new patch for name changes
> - Remove output-low
>
> Changes in v3:
> - Sort the
Enable the eDP display panel support without HPD on sc7280 platform.
Signed-off-by: Sankeerth Billakanti
---
Changes in v4:
- Create new patch for name changes
- Remove output-low
Changes in v3:
- Sort the nodes alphabetically
- Use - instead of _ as node names
- Place the backlight
