Re: [Freedreno] [DPU PATCH v3] drm/msm: Use atomic private_obj instead of subclassing
On 2018-03-20 04:01, Archit Taneja wrote: Hi, On Tuesday 20 March 2018 01:28 AM, Sean Paul wrote: Instead of subclassing atomic state, store driver private data in private_obj/state. This allows us to remove the swap_state driver hook for mdp5 and get closer to using the atomic helpers entirely. Changes in v2: - Use state->state in disp duplicate_state callback (Jeykumar) Changes in v3: - Update comment describing msm_kms_state (Jeykumar) One difference w.r.t the patchset "drm/msm/mdp5: Use the new private_obj state" is that this adds the atomic private_obj for all kms backends, whereas the one I'd done originally just added it for mdp5, so this patch set is better in that respect. The other difference is how we 'get' the private state. In this patch, the helper drm_atomic_get_private_obj_state() is used every time to get the private object state. I'd tried to do the same initially, but I noticed that drm_atomic_get_private_obj_state() doesn't return the correct state post swapping of states. So, instead of relying on the helper, I created a helper called mdp5_get_existing_global_state() that returns the desired state(the state pointer in msm_kms>state->base.state in this patch) in all funcs that are called post-swap. You could read about the issue on the the thread: "[RFC 1/3] drm/msm/mdp5: Add global state as a private atomic object" The problem was quite apparent with db410c, where SMP blocks are assigned to planes. If the latest SMP state isn't referred when configuring SMP registers, we see underruns immediately. An easy way to reproduce this is to use modset on db410c. I think it might occur with this patch too. It might be worth trying it out. Thanks, Archit Hello Archit, Now that I am trying to use the private obj to maintain resource pool in DPU, I realize the need for retrieving existing / new state API's. Don't you think this support is missing in the DRM core fwk, considering how drm_atomic_get_existing__state, drm_atomic_get_old__state, drm_atomic_get_new__state API's are available for CRTC/PLANE and CONNECTORS but not for private_obj's? Thanks, Jeykumar S. Cc: Jeykumar SankaranReviewed-by: Jeykumar Sankaran Signed-off-by: Sean Paul --- drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c | 37 ++ drivers/gpu/drm/msm/msm_atomic.c | 30 --- drivers/gpu/drm/msm/msm_drv.c| 65 ++-- drivers/gpu/drm/msm/msm_drv.h| 4 +- drivers/gpu/drm/msm/msm_kms.h| 27 +- 5 files changed, 94 insertions(+), 69 deletions(-) diff --git a/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c b/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c index 6d8e3a9a6fc0..f1a248419655 100644 --- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c +++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c @@ -74,36 +74,32 @@ struct mdp5_state *mdp5_get_state(struct drm_atomic_state *s) { struct msm_drm_private *priv = s->dev->dev_private; struct mdp5_kms *mdp5_kms = to_mdp5_kms(to_mdp_kms(priv->kms)); - struct msm_kms_state *state = to_kms_state(s); - struct mdp5_state *new_state; + struct msm_kms_state *kms_state; int ret; - if (state->state) - return state->state; - ret = drm_modeset_lock(_kms->state_lock, s->acquire_ctx); if (ret) return ERR_PTR(ret); - new_state = kmalloc(sizeof(*mdp5_kms->state), GFP_KERNEL); - if (!new_state) - return ERR_PTR(-ENOMEM); + kms_state = msm_kms_get_state(s); + if (IS_ERR_OR_NULL(kms_state)) + return (struct mdp5_state *)kms_state; /* casting ERR_PTR */ - /* Copy state: */ - new_state->hwpipe = mdp5_kms->state->hwpipe; - new_state->hwmixer = mdp5_kms->state->hwmixer; - if (mdp5_kms->smp) - new_state->smp = mdp5_kms->state->smp; + return kms_state->state; +} - state->state = new_state; +static void *mdp5_duplicate_state(void *state) +{ + if (!state) + return kzalloc(sizeof(struct mdp5_state), GFP_KERNEL); - return new_state; + return kmemdup(state, sizeof(struct mdp5_state), GFP_KERNEL); } -static void mdp5_swap_state(struct msm_kms *kms, struct drm_atomic_state *state) +static void mdp5_destroy_state(void *state) { - struct mdp5_kms *mdp5_kms = to_mdp5_kms(to_mdp_kms(kms)); - swap(to_kms_state(state)->state, mdp5_kms->state); + struct mdp5_state *mdp_state = state; + kfree(mdp_state); } static void mdp5_prepare_commit(struct msm_kms *kms, struct drm_atomic_state *state) @@ -229,7 +225,8 @@ static const struct mdp_kms_funcs kms_funcs = { .irq = mdp5_irq, .enable_vblank = mdp5_enable_vblank, .disable_vblank = mdp5_disable_vblank, - .swap_state = mdp5_swap_state, +
[Freedreno] [PATCH] gpu: Consistently use octal not symbolic permissions
There is currently a mixture of octal and symbolic permissions uses in files in drivers/gpu/drm and one file in drivers/gpu. There are ~270 existing octal uses and ~115 S_ uses. Convert all the S_ symbolic permissions to their octal equivalents as using octal and not symbolic permissions is preferred by many as more readable. see: https://lkml.org/lkml/2016/8/2/1945 Done with automated conversion via: $ ./scripts/checkpatch.pl -f --types=SYMBOLIC_PERMS --fix-inplace Miscellanea: o Wrapped modified multi-line calls to a single line where appropriate o Realign modified multi-line calls to open parenthesis o drivers/gpu/drm/msm/adreno/a5xx_debugfs.c has a world-writeable debug permission for "reset" - perhaps that should be modified Signed-off-by: Joe Perches--- drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c| 2 +- drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c | 98 +++--- drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c | 3 +- drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c| 9 +- drivers/gpu/drm/armada/armada_debugfs.c| 4 +- drivers/gpu/drm/drm_debugfs.c | 6 +- drivers/gpu/drm/drm_debugfs_crc.c | 4 +- drivers/gpu/drm/drm_sysfs.c| 2 +- drivers/gpu/drm/i915/gvt/firmware.c| 2 +- drivers/gpu/drm/i915/i915_debugfs.c| 8 +- drivers/gpu/drm/i915/i915_perf.c | 2 +- drivers/gpu/drm/i915/i915_sysfs.c | 22 ++--- drivers/gpu/drm/i915/intel_pipe_crc.c | 2 +- drivers/gpu/drm/msm/adreno/a5xx_debugfs.c | 5 +- drivers/gpu/drm/msm/msm_perf.c | 4 +- drivers/gpu/drm/msm/msm_rd.c | 4 +- drivers/gpu/drm/nouveau/nouveau_debugfs.c | 2 +- drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c| 11 ++- .../drm/omapdrm/displays/panel-sony-acx565akm.c| 6 +- .../drm/omapdrm/displays/panel-tpo-td043mtea1.c| 10 +-- drivers/gpu/drm/radeon/radeon_pm.c | 26 +++--- drivers/gpu/drm/radeon/radeon_ttm.c| 4 +- drivers/gpu/drm/sti/sti_drv.c | 2 +- drivers/gpu/drm/tinydrm/mipi-dbi.c | 4 +- drivers/gpu/drm/ttm/ttm_bo.c | 2 +- drivers/gpu/drm/ttm/ttm_memory.c | 12 +-- drivers/gpu/drm/ttm/ttm_page_alloc.c | 6 +- drivers/gpu/drm/ttm/ttm_page_alloc_dma.c | 6 +- drivers/gpu/drm/udl/udl_fb.c | 4 +- drivers/gpu/host1x/debug.c | 12 +-- 30 files changed, 138 insertions(+), 146 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c index f5fb93795a69..7b29febff511 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c @@ -830,7 +830,7 @@ int amdgpu_debugfs_regs_init(struct amdgpu_device *adev) for (i = 0; i < ARRAY_SIZE(debugfs_regs); i++) { ent = debugfs_create_file(debugfs_regs_names[i], - S_IFREG | S_IRUGO, root, + S_IFREG | 0444, root, adev, debugfs_regs[i]); if (IS_ERR(ent)) { for (j = 0; j < i; j++) { diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c index b455da487782..fa55d7e9e784 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c @@ -905,39 +905,39 @@ static ssize_t amdgpu_set_pp_power_profile_mode(struct device *dev, return -EINVAL; } -static DEVICE_ATTR(power_dpm_state, S_IRUGO | S_IWUSR, amdgpu_get_dpm_state, amdgpu_set_dpm_state); -static DEVICE_ATTR(power_dpm_force_performance_level, S_IRUGO | S_IWUSR, +static DEVICE_ATTR(power_dpm_state, 0644, amdgpu_get_dpm_state, amdgpu_set_dpm_state); +static DEVICE_ATTR(power_dpm_force_performance_level, 0644, amdgpu_get_dpm_forced_performance_level, amdgpu_set_dpm_forced_performance_level); -static DEVICE_ATTR(pp_num_states, S_IRUGO, amdgpu_get_pp_num_states, NULL); -static DEVICE_ATTR(pp_cur_state, S_IRUGO, amdgpu_get_pp_cur_state, NULL); -static DEVICE_ATTR(pp_force_state, S_IRUGO | S_IWUSR, - amdgpu_get_pp_force_state, - amdgpu_set_pp_force_state); -static DEVICE_ATTR(pp_table, S_IRUGO | S_IWUSR, - amdgpu_get_pp_table, - amdgpu_set_pp_table); -static DEVICE_ATTR(pp_dpm_sclk, S_IRUGO | S_IWUSR, - amdgpu_get_pp_dpm_sclk, - amdgpu_set_pp_dpm_sclk); -static DEVICE_ATTR(pp_dpm_mclk, S_IRUGO | S_IWUSR, - amdgpu_get_pp_dpm_mclk, - amdgpu_set_pp_dpm_mclk); -static DEVICE_ATTR(pp_dpm_pcie, S_IRUGO | S_IWUSR, - amdgpu_get_pp_dpm_pcie, -
[Freedreno] [PATCH v7 4/4] dt-bindings: drm/panel: Document Innolux TV123WAM panel bindings
Innolux TV123WAM is a 12.3" eDP display panel with 2160x1440 resolution, which can be supported by simple panel driver. Changes in v1: - Make use of simple panel driver instead of creating a new driver for this panel (Sean Paul). - Combine dt-binding and driver changes into one patch as done by other existing panel support changes. Changes in v2: - Separate driver change from dt-binding documentation (Rob Herring). - Add the properties from simple-panel binding that are applicable to this panel (Rob Herring). Signed-off-by: Sandeep PandaReviewed-by: Rob Herring --- .../bindings/display/panel/innolux,tv123wam.txt | 20 1 file changed, 20 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/innolux,tv123wam.txt diff --git a/Documentation/devicetree/bindings/display/panel/innolux,tv123wam.txt b/Documentation/devicetree/bindings/display/panel/innolux,tv123wam.txt new file mode 100644 index 000..a9b3526 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/innolux,tv123wam.txt @@ -0,0 +1,20 @@ +Innolux TV123WAM 12.3 inch eDP 2K display panel + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. + +Required properties: +- compatible: should be "innolux,tv123wam" +- power-supply: regulator to provide the supply voltage + +Optional properties: +- enable-gpios: GPIO pin to enable or disable the panel +- backlight: phandle of the backlight device attached to the panel + +Example: + panel_edp: panel-edp { + compatible = "innolux,tv123wam"; + enable-gpios = < 31 GPIO_ACTIVE_LOW>; + power-supply = <_l2>; + backlight = <>; + }; -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project ___ Freedreno mailing list Freedreno@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/freedreno
[Freedreno] [PATCH v7 3/4] drm/panel: add Innolux TV123WAM panel driver support
Add support for Innolux TV123WAM, which is a 12.3" eDP display panel with 2160x1440 resolution. Changes in v1: - Add the compatibility string, display_mode and panel_desc structures in alphabetical order (Sean Paul). Signed-off-by: Sandeep Panda--- drivers/gpu/drm/panel/panel-simple.c | 27 +++ 1 file changed, 27 insertions(+) diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index 234af81..8c72270 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -1190,6 +1190,30 @@ static void panel_simple_shutdown(struct device *dev) }, }; +static const struct drm_display_mode innolux_tv123wam_mode = { + .clock = 206016, + .hdisplay = 2160, + .hsync_start = 2160 + 48, + .hsync_end = 2160 + 48 + 32, + .htotal = 2160 + 48 + 32 + 80, + .vdisplay = 1440, + .vsync_start = 1440 + 3, + .vsync_end = 1440 + 3 + 10, + .vtotal = 1440 + 3 + 10 + 27, + .vrefresh = 60, + .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC, +}; + +static const struct panel_desc innolux_tv123wam = { + .modes = _tv123wam_mode, + .num_modes = 1, + .bpc = 8, + .size = { + .width = 259, + .height = 173, + }, +}; + static const struct drm_display_mode innolux_zj070na_01p_mode = { .clock = 51501, .hdisplay = 1024, @@ -2037,6 +2061,9 @@ static void panel_simple_shutdown(struct device *dev) .compatible = "innolux,n156bge-l21", .data = _n156bge_l21, }, { + .compatible = "innolux,tv123wam", + .data = _tv123wam, + }, { .compatible = "innolux,zj070na-01p", .data = _zj070na_01p, }, { -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project ___ Freedreno mailing list Freedreno@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/freedreno
[Freedreno] [PATCH v7 2/4] dt-bindings: drm/bridge: Document sn65dsi86 bridge bindings
Document the bindings used for the sn65dsi86 DSI to eDP bridge. Changes in v1: - Rephrase the dt-binding descriptions to be more inline with existing bindings (Andrzej Hajda). - Add missing dt-binding that are parsed by corresponding driver (Andrzej Hajda). Changes in v2: - Remove edp panel specific dt-binding entries. Only keep bridge specific entries (Sean Paul). - Remove custom-modes dt entry since its usage is removed from driver also (Sean Paul). - Remove is-pluggable dt entry since this will not be needed anymore (Sean Paul). Changes in v3: - Remove irq-gpio dt entry and instead populate is an interrupt property (Rob Herring). Changes in v4: - Add link to bridge chip datasheet (Stephen Boyd) - Add vpll and vcc regulator supply bindings (Stephen Boyd) - Add ref clk optional dt binding (Stephen Boyd) - Add gpio-controller optional dt binding (Stephen Boyd) Changes in v5: - Use clock property to specify the input refclk (Stephen Boyd). - Update gpio cell and pwm cell numbers (Stephen Boyd). Changes in v6: - Add property to mention the lane mapping scheme and polarity inversion (Stephen Boyd). Signed-off-by: Sandeep Panda--- .../bindings/display/bridge/ti,sn65dsi86.txt | 89 ++ 1 file changed, 89 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt new file mode 100644 index 000..4a771a3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt @@ -0,0 +1,89 @@ +SN65DSI86 DSI to eDP bridge chip + + +This is the binding for Texas Instruments SN65DSI86 bridge. +http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn65dsi86=pdf + +Required properties: +- compatible: Must be "ti,sn65dsi86" +- reg: i2c address of the chip, 0x2d as per datasheet +- enable-gpios: OF device-tree gpio specification for bridge_en pin + +- vccio-supply: A 1.8V supply that powers up the digital IOs. +- vpll-supply: A 1.8V supply that powers up the displayport PLL. +- vcca-supply: A 1.2V supply that powers up the analog circuits. +- vcc-supply: A 1.2V supply that powers up the digital core. + +Optional properties: +- interrupts: Specifier for the SN65DSI86 interrupt line. +- hpd-gpios: Specifications for HPD gpio pin. + +- gpio-controller: Marks the device has a GPIO controller. +- #gpio-cells: Should be two. The first cell is the pin number and + the second cell is used to specify flags. + See ../../gpio/gpio.txt for more information. +- #pwm-cells : Should be one. See ../../pwm/pwm.txt for description of + the cell formats. + +- clock-names: should be "refclk" +- clocks: Specification for input reference clock. The reference + clock rate must be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4 MHz. + +- lane-config: Specification to describe the logical to physical lane + mapping scheme and polarity inversion of lanes. + +Required nodes: + +This device has two video ports. Their connections are modelled using the +OF graph bindings specified in Documentation/devicetree/bindings/graph.txt. + +- Video port 0 for DSI input +- Video port 1 for eDP output + +Example +--- + +edp-bridge@2d { + compatible = "ti,sn65dsi86"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2d>; + + enable-gpios = < 33 GPIO_ACTIVE_HIGH>; + interrupt-parent = <>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + + vccio-supply = <_l17>; + vcca-supply = <_l6>; + vpll-supply = <_l17>; + vcc-supply = <_l6>; + + clock-names = "refclk"; + clocks = <_refclk>; + + lane-config = <0 0>, /* Lane 0 logical is lane 0 phys (!inv) */ + <1 1>, /* Lane 1 logical is lane 1 phys (inv) */ + <2 0>, /* Lane 2 logical is lane 2 phys (!inv) */ + <3 1>; /* Lane 3 logical is lane 3 phys (inv) */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + edp_bridge_in: endpoint { + remote-endpoint = <_out>; + }; + }; + + port@1 { + reg = <1>; + + edp_bridge_out: endpoint { + remote-endpoint = <_panel_in>; + }; + }; + }; +} -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project ___ Freedreno mailing list Freedreno@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/freedreno
[Freedreno] [PATCH v7 1/4] drm/bridge: add support for sn65dsi86 bridge driver
Add support for TI's sn65dsi86 dsi2edp bridge chip. The chip converts DSI transmitted signal to eDP signal, which is fed to the connected eDP panel. This chip can be controlled via either i2c interface or dsi interface. Currently in driver all the control registers are being accessed through i2c interface only. Also as of now HPD support has not been added to bridge chip driver. Changes in v1: - Split the dt-bindings and the driver support into separate patches (Andrzej Hajda). - Use of gpiod APIs to parse and configure gpios instead of obsolete ones (Andrzej Hajda). - Use macros to define the register offsets (Andrzej Hajda). Changes in v2: - Separate out edp panel specific HW resource handling from bridge driver and create a separate edp panel drivers to handle panel specific mode information and HW resources (Sean Paul). - Replace pr_* APIs to DRM_* APIs to log error or debug information (Sean Paul). - Remove some of the unnecessary structure/variable from driver (Sean Paul). - Rename the function and structure prefix "sn65dsi86" to "ti_sn_bridge" (Sean Paul / Rob Herring). - Remove most of the hard-coding and modified the bridge init sequence based on current mode (Sean Paul). - Remove the existing function to retrieve the EDID data and implemented this as an i2c_adapter and use drm_get_edid() (Sean Paul). - Remove the dummy irq handler implementation, will add back the proper irq handling later (Sean Paul). - Capture the required enable gpios in a single array based on dt entry instead of having individual descriptor for each gpio (Sean Paul). Changes in v3: - Remove usage of irq_gpio and replace it as "interrupts" property (Rob Herring). - Remove the unnecessary header file inclusions (Sean Paul). - Rearrange the header files in alphabetical order (Sean Paul). - Use regmap interface to perform i2c transactions. - Update Copyright/License field and address other review comments (Jordan Crouse). Changes in v4: - Update License/Copyright (Sean Paul). - Add Kconfig and Makefile changes (Sean Paul). - Drop i2c gpio handling from this bridge driver, since i2c sda/scl gpios will be handled by i2c master. - Update required supplies names. - Remove unnecessary goto statements (Sean Paul). - Add mutex lock to power_ctrl API to avoid race conditions (Sean Paul). - Add support to parse reference clk frequency from dt(optional). - Update the bridge chip enable/disable sequence. Changes in v5: - Fixed Kbuild test service reported warnings. Changes in v6: - Use PM runtime based ref-counting instead of local ref_count mechanism (Stephen Boyd). - Clean up some debug logs and indentations (Sean Paul). - Simplify dp rate calculation (Sean Paul). - Add support to configure refclk based on input REFCLK pin or DACP/N pin (Stephen Boyd). Changes in v7: - Use static supply entries instead of dynamic allocation (Andrzej Hajda). - Defer bridge driver probe if panel is not probed (Andrzej Hajda). - Update of_graph APIs for correct node reference management. (Andrzej Hajda). - Remove local display_mode object (Andrzej Hajda). - Remove version id check function from driver. Signed-off-by: Sandeep Panda--- drivers/gpu/drm/bridge/Kconfig| 9 + drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/ti-sn65dsi86.c | 675 ++ 3 files changed, 685 insertions(+) create mode 100644 drivers/gpu/drm/bridge/ti-sn65dsi86.c diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig index 3b99d5a..8153150 100644 --- a/drivers/gpu/drm/bridge/Kconfig +++ b/drivers/gpu/drm/bridge/Kconfig @@ -108,6 +108,15 @@ config DRM_TI_TFP410 ---help--- Texas Instruments TFP410 DVI/HDMI Transmitter driver +config DRM_TI_SN65DSI86 + tristate "TI SN65DSI86 DSI to eDP bridge" + depends on OF + select DRM_KMS_HELPER + select REGMAP_I2C + select DRM_PANEL + ---help--- + Texas Instruments SN65DSI86 DSI to eDP Bridge driver + source "drivers/gpu/drm/bridge/analogix/Kconfig" source "drivers/gpu/drm/bridge/adv7511/Kconfig" diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile index 373eb28..3711be8 100644 --- a/drivers/gpu/drm/bridge/Makefile +++ b/drivers/gpu/drm/bridge/Makefile @@ -12,4 +12,5 @@ obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix/ obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511/ obj-$(CONFIG_DRM_TI_TFP410) += ti-tfp410.o +obj-$(CONFIG_DRM_TI_SN65DSI86) += ti-sn65dsi86.o obj-y += synopsys/ diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c new file mode 100644 index 000..3c71789 --- /dev/null +++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c @@ -0,0 +1,675 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2018, The Linux Foundation. All rights reserved. + */ + +#include
[Freedreno] [PATCH v7 0/4] Add suppport for sn65dsi86 bridge chip and Innolux 2k edp panel
Changes in current patchset: - Defer bridge driver probe until panel probe happens. - Update the of_graph APIs based on comments. - Add optional lane-config dt-binding to bridge documentation. Sandeep Panda (4): drm/bridge: add support for sn65dsi86 bridge driver dt-bindings: drm/bridge: Document sn65dsi86 bridge bindings drm/panel: add Innolux TV123WAM panel driver support dt-bindings: drm/panel: Document Innolux TV123WAM panel bindings .../bindings/display/bridge/ti,sn65dsi86.txt | 89 +++ .../bindings/display/panel/innolux,tv123wam.txt| 20 + drivers/gpu/drm/bridge/Kconfig | 9 + drivers/gpu/drm/bridge/Makefile| 1 + drivers/gpu/drm/bridge/ti-sn65dsi86.c | 675 + drivers/gpu/drm/panel/panel-simple.c | 27 + 6 files changed, 821 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt create mode 100644 Documentation/devicetree/bindings/display/panel/innolux,tv123wam.txt create mode 100644 drivers/gpu/drm/bridge/ti-sn65dsi86.c -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project ___ Freedreno mailing list Freedreno@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/freedreno