On Thu, Dec 2, 2021 at 11:27 PM Stephen Boyd wrote:
> drm/mcde: Migrate to aggregate driver
This also works fine after the patch series.
Tested-by: Linus Walleij
Yours,
Linus Walleij
n Reichel
> Cc:
> Cc: Daniel Vetter
> Cc: Linus Walleij
> Cc: "Rafael J. Wysocki"
> Cc: Rob Clark
> Cc: Russell King
> Cc: Saravana Kannan
> Signed-off-by: Stephen Boyd
Pulled in that patches and tested. Works!
Tested-by: Linus Walleij
Yours,
Linus Walleij
O_EOT_PACKET.
>
> Signed-off-by: Nicolas Boichat
Reviewed-by: Linus Walleij
Yours,
Linus Walleij
___
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno
On Wed, Mar 3, 2021 at 11:31 AM Nicolas Boichat wrote:
> On Mon, Mar 1, 2021 at 4:59 PM Linus Walleij wrote:
> > > dsi->mode_flags =
> > > MIPI_DSI_CLOCK_NON_CONTINUOUS |
> > > -
gt; dsi->mode_flags =
> MIPI_DSI_CLOCK_NON_CONTINUOUS |
> - MIPI_DSI_MODE_EOT_PACKET;
> + MIPI_DSI_MODE_NO_EOT_PACKET;
Same, just delete the flag.
These are all just semantic bugs due to the amb
On Tue, Jul 7, 2020 at 10:36 PM Rob Clark wrote:
> From: Rob Clark
>
> We haven't sync'd for a while.. pull in updates to get definitions for
> some fields in pkt7 payloads.
>
> Signed-off-by: Rob Clark
Out of curiosity : where are the syncs coming from?
On Tue, Jun 9, 2020 at 4:04 PM Rob Clark wrote:
> On Tue, Jun 9, 2020 at 5:48 AM Linus Walleij wrote:
> > On Tue, May 5, 2020 at 10:27 AM Linus Walleij
> > wrote:
> > > On Wed, Apr 8, 2020 at 9:15 PM Arnd Bergmann wrote:
> > >
> > > > I ran into
On Tue, May 5, 2020 at 10:27 AM Linus Walleij wrote:
> On Wed, Apr 8, 2020 at 9:15 PM Arnd Bergmann wrote:
>
> > I ran into a randconfig link error with debugfs disabled:
> >
> > arm-linux-gnueabi-ld:
> > drivers/gpu/drm/msm/msm_gpu.o: in function `should_dump
ange the helper to only look at this variable if debugfs is present.
>
> Fixes: e515af8d4a6f ("drm/msm: devcoredump should dump MSM_SUBMIT_BO_DUMP
> buffers")
> Signed-off-by: Arnd Bergmann
This fixes a compilation error for me on the APQ
On Thu, Nov 14, 2019 at 7:54 PM Rob Clark wrote:
> From: Rob Clark
>
> This isn't an error. Also the clk APIs handle the NULL case, so we can
> just delete the check.
>
> Signed-off-by: Rob Clark
> Tested-by: Matthias Kaehlcke
Reviewed-by: Linus Wall
ds that
> are in boxes right now) so I'm going to wait on the last two I think.
That's fine. It is just occasional drive-by coding anyway.
Yours,
Linus Walleij
___
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno
freedreno@lists.freedesktop.org
Reviewed-by: Brian Masney
Signed-off-by: Linus Walleij
---
ChangeLog v1->v2:
- Rebased on v5.3-rc1
- Collected review tag
---
drivers/gpu/drm/msm/hdmi/hdmi.c | 66 +++
drivers/gpu/drm/msm/hdmi/hdmi.h | 4 +-
drivers/gpu
ed-by: Brian Masney
Signed-off-by: Linus Walleij
---
ChangeLog v1->v2:
- Rebased on v5.3-rc1
- Collected review tag
---
drivers/gpu/drm/msm/hdmi/hdmi.c | 19 -
drivers/gpu/drm/msm/hdmi/hdmi_connector.c | 25 ++-
2 files changed, 20 insertions(+), 24 d
@lists.freedesktop.org
Reviewed-by: Brian Masney
Signed-off-by: Linus Walleij
---
ChangeLog v1->v2:
- Rebased on v5.3-rc1
- Collected review tag
---
drivers/gpu/drm/msm/disp/dpu1/dpu_io_util.c | 1 +
drivers/gpu/drm/msm/disp/dpu1/dpu_io_util.h | 9 -
drivers/gpu/drm/msm/disp/dpu1/dpu_mds
This file is not using any symbols from so just
drop this include.
Cc: Rob Clark
Cc: Sean Paul
Cc: linux-arm-...@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Reviewed-by: Brian Masney
Signed-off-by: Linus Walleij
---
ChangeLog v1->v2:
- Rebased on v5.3-rc1
- Collected review
seen from the
code reading the HPD GPIO.
Stop try driving a value to the HPD input GPIO.
Cc: Rob Clark
Cc: Sean Paul
Cc: linux-arm-...@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Reviewed-by: Brian Masney
Signed-off-by: Linus Walleij
---
ChangeLog v1->v2:
- Rebased on v5.3-rc1
- Collec
This DSI driver uses the new descriptor API so these old
GPIO API includes are surplus.
Cc: Rob Clark
Cc: Sean Paul
Cc: linux-arm-...@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Reviewed-by: Brian Masney
Signed-off-by: Linus Walleij
---
ChangeLog v1->v2:
- Rebased on v5.3-
On Tue, Aug 13, 2019 at 4:46 PM Jordan Crouse wrote:
> Now that CONFIG_DRM_MSM is no longer default 'y' add it as a module to all
> ARCH_QCOM enabled defconfigs to restore the previous expected build
> behavior.
>
> Signed-off-by: Jordan Crouse
Reviewed-by: Linus Wall
On Thu, Aug 15, 2019 at 2:49 AM Brian Masney wrote:
> Silence a warning message due to an -EPROBE_DEFER error to help cleanup
> the system boot log.
>
> Signed-off-by: Brian Masney
Reviewed-by: Linus Walleij
Yours,
Linus Walleij
_
On Thu, Aug 15, 2019 at 2:49 AM Brian Masney wrote:
> Silence two warning messages that occur due to -EPROBE_DEFER errors to
> help cleanup the system boot log.
>
> Signed-off-by: Brian Masney
Reviewed-by: Linus Walleij
Yours,
L
mvs2.
I suppose it is named "mvs" on both PMICs and this is just a rail
name so as not to confuse the schematic?
> Signed-off-by: Brian Masney
Reviewed-by: Linus Walleij
Yours,
Linus Walleij
___
Freedreno mailing list
Freedreno@lists.free
On Thu, Aug 15, 2019 at 2:49 AM Brian Masney wrote:
> Add HDMI nodes and other supporting infrastructure in order to support
> the external display. This is based on work from Jonathan Marek.
>
> Signed-off-by: Brian Masney
Reviewed-by: Linus Walleij
Yours,
L
On Thu, Aug 15, 2019 at 2:49 AM Brian Masney wrote:
> Add HDMI tx and phy nodes to support an external display that can be
> connected over the SlimPort. This is based on work from Jonathan Marek.
>
> Signed-off-by: Brian Masney
Reviewed-by: Linus Walleij
Yours,
L
is 0x78, not 0x70, so correct the value to allow device
> probing to succeed.
>
> [1]
> https://github.com/AICP/kernel_lge_hammerhead/blob/n7.1/drivers/video/slimport/slimport_tx_reg.h
>
> Signed-off-by: Brian Masney
Reviewed-by: Linus
On Thu, Aug 15, 2019 at 2:49 AM Brian Masney wrote:
> Add CONFIG_DRM_ANALOGIX_ANX78XX as a module so that the external display
> can be used on the Nexus 5 phones.
>
> Signed-off-by: Brian Masney
Reviewed-by: Linus Walleij
Yours,
L
pdata);
Clever idea. Good for initial support, probably later on it would
need to be reworked using runtime PM so it's not constantly
powered up.
See for example how I try to push down power dissipation
of sensors in 3d838118c6aa.
Reviewed-by: Linus Walleij
Yours,
Linus Walleij
___
> Signed-off-by: Brian Masney
Reviewed-by: Linus Walleij
Yours,
Linus Walleij
___
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno
On Thu, Aug 15, 2019 at 2:49 AM Brian Masney wrote:
> Add support for the 7808 variant. While we're here, the of match table
> was missing support for the 7812 and 7818 variants, so add them as well.
>
> Signed-off-by: Brian Masney
Reviewed-by: Linus Walleij
You
On Thu, Aug 15, 2019 at 2:49 AM Brian Masney wrote:
> Add support for the analogix,anx7808, analogix,anx7812, and
> analogix,anx7818 variants.
>
> Signed-off-by: Brian Masney
Reviewed-by: Linus Walleij
Yours,
Linus Walleij
___
Freed
On Sun, Jul 28, 2019 at 12:02 PM Linus Walleij wrote:
> On Sat, Jun 29, 2019 at 3:01 PM Linus Walleij
> wrote:
>
> > This file is not using any symbols from so just
> > drop this include.
> >
> > Cc: Rob Clark
> > Cc: Sean Paul
> > Cc: li
On Sat, Jun 29, 2019 at 3:01 PM Linus Walleij wrote:
> This file is not using any symbols from so just
> drop this include.
>
> Cc: Rob Clark
> Cc: Sean Paul
> Cc: linux-arm-...@vger.kernel.org
> Cc: freedreno@lists.freedesktop.org
> Signed-off-by: Linus Walleij
Ro
usually of the opinion that if a tree falls in the forest and noone
is there to hear it, who cares what sound it makes.
So we can just apply the other patches and not this one, which
should work just fine. It will support the variants of the
bindings ending with "-gpios" o
ff-by: Linus Walleij
---
drivers/gpu/drm/msm/hdmi/hdmi.c | 19 -
drivers/gpu/drm/msm/hdmi/hdmi_connector.c | 25 ++-
2 files changed, 20 insertions(+), 24 deletions(-)
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
ast resort. Provide an explicit whitelist
for those GPIOs.
Cc: Rob Clark
Cc: Sean Paul
Cc: linux-arm-...@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Linus Walleij
---
Rob/Sean: if the approach is overall OK I will merge this
one patch already for v5.3 so the rest can be que
seen from the
code reading the HPD GPIO.
Stop try driving a value to the HPD input GPIO.
Cc: Rob Clark
Cc: Sean Paul
Cc: linux-arm-...@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Linus Walleij
---
drivers/gpu/drm/msm/hdmi/hdmi_connector.c | 2 +-
1 file changed, 1 insertion
This file is not using any symbols from so just
drop this include.
Cc: Rob Clark
Cc: Sean Paul
Cc: linux-arm-...@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Linus Walleij
---
drivers/gpu/drm/msm/disp/mdp4/mdp4_lvds_connector.c | 2 --
1 file changed, 2 deletions
freedreno@lists.freedesktop.org
Signed-off-by: Linus Walleij
---
drivers/gpu/drm/msm/hdmi/hdmi.c | 66 +++
drivers/gpu/drm/msm/hdmi/hdmi.h | 4 +-
drivers/gpu/drm/msm/hdmi/hdmi_connector.c | 42 +--
3 files changed, 45 insertions(+), 67 deletions(-)
di
@lists.freedesktop.org
Signed-off-by: Linus Walleij
---
drivers/gpu/drm/msm/disp/dpu1/dpu_io_util.c | 1 +
drivers/gpu/drm/msm/disp/dpu1/dpu_io_util.h | 9 -
drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c| 4
3 files changed, 5 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm
This DSI driver uses the new descriptor API so these old
GPIO API includes are surplus.
Cc: Rob Clark
Cc: Sean Paul
Cc: linux-arm-...@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Linus Walleij
---
drivers/gpu/drm/msm/dsi/dsi_host.c | 2 --
1 file changed, 2 deletions
/drm/drm_atomic_helper.c:
msecs_to_jiffies(50)
Yours,
Linus Walleij
___
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno
timouts, and I also notice the update is slow in the
display, as if the DSI panel was running in low power (LP) mode.
Was booting this to do some other work, but happy to see the progress!
Yours,
Linus Walleij
___
Freedreno mailing list
Freedr
iewed-by: Linus Walleij
Yours,
Linus Walleij
___
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno
d to alwaĆ½s get up, as serial console
might not always be available. For example for people
who can't solder special cables but still want to boot a
custom ROM on their Nexus. So I'd say keep it like this.
Yours,
Linus Walleij
___
Freedreno maili
vblank will be fired from something like a monitor at 50 or 60 HZ
~20 ms so 50ms seemed like a good timeout at the time.
On a DSI display this is dubious, absolutely in LP mode, and even
in HS mode.
Yours,
Linus Walleij
___
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno
On Sun, May 5, 2019 at 3:04 PM Brian Masney wrote:
> Add initial support for the display found on the LG Nexus 5 (hammerhead)
> phone.
>
> Signed-off-by: Brian Masney
Reviewed-by: Linus Walleij
Yours,
Linus Walleij
___
Freedreno
On Sun, May 5, 2019 at 3:04 PM Brian Masney wrote:
> Add necessary device tree nodes for the main LCD backlight.
>
> Signed-off-by: Brian Masney
Reviewed-by: Linus Walleij
> This requires this series that I submitted to the LED / backlight
> subsystem:
> https://lo
46 matches
Mail list logo