labs.org/project/devicetree-bindings/patch/20240216-x1e80100-display-v3-2-28b1c33ac...@linaro.org
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make s
This patchset adds support for display for X1E80100.
The support for embedded DisplayPort on this platform will not
be enabled using the connetor type from driver match data,
but through some 'is-edp' property via DT. This subsequent work
will be part of a separate patchset.
Signed-off-by: Abel
Document the MDSS hardware found on the Qualcomm X1E80100 platform.
Reviewed-by: Krzysztof Kozlowski
Signed-off-by: Abel Vesa
---
.../bindings/display/msm/qcom,x1e80100-mdss.yaml | 253 +
1 file changed, 253 insertions(+)
diff --git
Document the DPU for Qualcomm X1E80100 platform in the SM8650 schema, as
they are similar.
Signed-off-by: Abel Vesa
---
Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git
Add definitions for the display hardware used on the Qualcomm X1E80100
platform.
Co-developed-by: Abhinav Kumar
Signed-off-by: Abhinav Kumar
Reviewed-by: Dmitry Baryshkov
Signed-off-by: Abel Vesa
---
.../drm/msm/disp/dpu1/catalog/dpu_9_2_x1e80100.h | 449 +
Add support for MDSS on X1E80100.
Reviewed-by: Dmitry Baryshkov
Signed-off-by: Abel Vesa
---
drivers/gpu/drm/msm/msm_mdss.c | 13 +
1 file changed, 13 insertions(+)
diff --git a/drivers/gpu/drm/msm/msm_mdss.c b/drivers/gpu/drm/msm/msm_mdss.c
index 35423d10aafa..6eda501e2a1a 100644
The commit ea489a3d983b ("drm/ci: add sc7180-trogdor-kingoftown")
dropped the msm-sc7180-skips.txt file, which disabled suspend-to-RAM
tests. However testing shows that STR tests still can fail. Restore the
skiplist, applying it to both limozeen and kingoftown machines.
Fixes: ea489a3d983b
Unlike the the very close A740 GPU on the SM8550 SoC, the A750 GPU
doesn't have an HWCFG block but a separate register set.
The missing registers are added in the a6xx.xml.h file that would
require a subsequent sync and the non-existent hwcfg is handled
in a6xx_set_hwcg().
The A750 GPU info are
Document the Adreno 750 GMU found on the SM8650 platform.
Reviewed-by: Konrad Dybcio
Acked-by: Conor Dooley
Signed-off-by: Neil Armstrong
---
Documentation/devicetree/bindings/display/msm/gmu.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git
Document the GPU SMMU found on the SM8650 platform.
Signed-off-by: Neil Armstrong
---
Documentation/devicetree/bindings/iommu/arm,smmu.yaml | 6 --
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
The if condition for the SM8[45]50 GPU SMMU is too large,
add the other compatible strings to the condition to only
allow the clocks for the GPU SMMU nodes.
Fixes: 4fff78dc2490 ("dt-bindings: arm-smmu: Document SM8[45]50 GPU SMMU")
Suggested-by: Dmitry Baryshkov
Signed-off-by: Neil Armstrong
Add support for the A750 GPU found on the SM8650 platform
Unlike the the very close A740 GPU on the SM8550 SoC, the A750 GPU
doesn't have an HWCFG block but a separate register set.
The A750 GPU info are added under the adreno_is_a750() macro and
the ADRENO_7XX_GEN3 family id.
Reviewed-by:
Add GPU nodes for the SM8650 platform.
Signed-off-by: Neil Armstrong
---
arch/arm64/boot/dts/qcom/sm8650.dtsi | 166 +++
1 file changed, 166 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi
b/arch/arm64/boot/dts/qcom/sm8650.dtsi
index
Add path of the GPU firmware for the SM8650-QRD board
Reviewed-by: Konrad Dybcio
Signed-off-by: Neil Armstrong
---
arch/arm64/boot/dts/qcom/sm8650-qrd.dts | 8
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts
Sync missing regs for A750 clock gating control related registers
from Mesa a6xx.xml.h generated file.
Those registers were added in the !27576 merge request [1].
[1] https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27576
Signed-off-by: Neil Armstrong
---
On Thu, 15 Feb 2024, Abhinav Kumar wrote:
> intel_dp_vsc_sdp_pack() can be re-used by other DRM drivers as well.
> Lets move this to drm_dp_helper to achieve this.
>
> changes in v2:
> - rebased on top of drm-tip
>
> Acked-by: Dmitry Baryshkov
> Signed-off-by: Abhinav Kumar
Acked-by:
From: Kuogee Hsieh
Introduce a peripheral flushing mechanism to decouple peripheral
metadata flushing from timing engine related flush.
Changes in v2:
- Fixed some misalignment issues
Signed-off-by: Kuogee Hsieh
Signed-off-by: Paloma Arellano
Reviewed-by: Dmitry Baryshkov
---
Adjust the encoder format programming in the case of video mode for DP
to accommodate CDM related changes.
Changes in v4:
- Remove hw_cdm check in dpu_encoder_needs_periph_flush()
- Remove hw_cdm check when getting the fmt_fourcc in
dpu_encoder_phys_vid_enable()
Changes
DP controller can be setup to operate in either SDP update flush mode or
peripheral flush mode based on the DP controller hardware version.
Starting in DP v1.2, the hardware documents require the use of
peripheral flush mode for SDP packets such as PPS OR VSC SDP packets.
In-line with this
All the components of YUV420 over DP are added. Therefore, let's mark the
connector property as true for DP connector when the DP type is not eDP
and when there is a CDM block available.
Changes in v3:
- Move setting the connector's ycbcr_420_allowed parameter so
that it is not
Adjust the encoder timing engine setup programming in the case of video
mode for YUV420 over DP to accommodate CDM.
Changes in v3:
- Move drm_display_mode's hskew division to another patch
- Minor cleanup
Changes in v2:
- Move timing engine programming to this patch
Add support to pack and send the VSC SDP packet for DP. This therefore
allows the transmision of format information to the sinks which is
needed for YUV420 support over DP.
Changes in v4:
- Remove struct msm_dp_sdp_with_parity
- Use dp_utils_pack_sdp_header() to pack the SDP
Widebus enablement is decided by the interfaces based on their specific
checks and that already happens with DSI/DP specific helpers. Let's
invoke these helpers from dpu_encoder_is_widebus_enabled() to make it
cleaner overall.
Signed-off-by: Paloma Arellano
Reviewed-by: Dmitry Baryshkov
---
Change all relevant DP controller related programming for YUV420 cases.
Namely, change the pixel clock math to consider YUV420 and modify the
MVID programming to consider YUV420.
Changes in v2:
- Move configuration control programming to a different commit
- Slight code
In the DP driver, check if VSC SDP is supported and propagate this value
to dp_panel. In dp_display's dp_mode, the out_fmt_is_yuv_420 parameter
must also utilize this value since YUV420 is only allowed when VSC SDP
is supported.
Changes in v2:
- Move DP programming when VSC SDP is
Parity calculation is necessary for VSC SDP implementation. Therefore
create new files dp_utils.c and dp_utils.h and move the parity
calculating functions here. This ensures that they are usable by SDP
programming in both dp_catalog.c and dp_audio.c
Changes in v3:
- Change ordering of the
Move dpu_encoder_helper_phys_setup_cdm to dpu_encoder in preparation for
implementing YUV420 over DP, which requires CDM compatibility.
Changes in v2:
- Slightly change the wording of the commit text to make clear
that YUV over DP requires CDM
Signed-off-by: Paloma Arellano
Generalize dpu_encoder_helper_phys_setup_cdm to be compatible with DP.
Changes in v2:
- Minor formatting changes
- Move the modification of the dimensions for CDM setup to a new
patch
Signed-off-by: Paloma Arellano
Reviewed-by: Dmitry Baryshkov
---
Wide bus is not supported when the mode is YUV420 in DP. In preparation
for changing the DPU programming to reflect this, the value and
assignment location of wide_bus_en for the DP submodules must be
changed. Move it from boot time in dp_init_sub_modules() to run time in
dp_display_mode_set.
Rename wide_bus_en to wide_bus_supported in dp_display_private to
correctly establish that the parameter is referencing if wide bus is
supported instead of enabled.
Signed-off-by: Paloma Arellano
Reviewed-by: Dmitry Baryshkov
---
drivers/gpu/drm/msm/dp/dp_display.c | 42
Change relevant DP controller related programming for YUV420 cases.
Program the configuration control register to indicate YUV420.
Changes in v2:
- Create a new patch only for configuration control programming
Signed-off-by: Paloma Arellano
Reviewed-by: Dmitry Baryshkov
---
Reserve CDM blocks for DP if the mode format is YUV420. Currently this
reservation only works for writeback and DP if the format is YUV420. But
this can be easily extented to other YUV formats for DP.
Changes in v2:
- Minor code simplification
Signed-off-by: Paloma Arellano
Reviewed-by:
Setting up the timing engine when the physical encoder has a split role
neglects dividing the drm_display_mode's hskew parameter. Let's fix this
since this must also be done in preparation for implementing YUV420 over
DP.
Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Signed-off-by:
Modify the output width and height parameters of hw_cdm to utilize the
physical encoder's data instead of obtaining the information from the
framebuffer. CDM is to be set up to utilize the actual output data since
at CDM setup, there is no difference between the two sources.
Changes in v2:
The Chroma Down Sampling (CDM) block is a hardware component in the DPU
pipeline that includes a CSC block capable of converting RGB input from
the DPU to YUV data.
This block can be used with either HDMI, DP, or writeback interfaces.
This series adds support for the CDM block to be used with DP
CDM block supports formats other than H1V2 for DP. Since we are now
adding support for CDM over DP, relax the checks to allow all other
formats for DP other than H1V2.
Changes in v2:
- Add fixes tag
- Move patch to top of series
Fixes: 0afac0ba6024 ("drm/msm/dpu: add dpu_hw_cdm
36 matches
Mail list logo
