Assuming you had a way to populate the radius database with your username/password pairs, you could configure each one with a Max-All-Session-Time value.FreeRADIUS will make sure they get disconnected when their time is used up.liran tal [EMAIL PROTECTED] wrote: Hey guys,I'd like to try and
Using freeradius 1.0.2 with rlm_sql_postgres, all my users are defined
in my DB and all my accounting is stored in this manner too.
I have simultaneous-use set to 1.
Only 1 user can login at a time!
Let me present my case and then i will detail what i think is happening
on my radius server.
Im using the following configuration to handle sessions
# Session database, used for checking Simultaneous-Use. Either the radutmp
# or rlm_sql module can handle this.
# The rlm_sql module is *much* faster
session {
#radutmp
#
# See Simultaneous Use Checking Querie in sql.conf
I am on holiday between June 5 to June 9. I will return to my office on
June 12.
See you soon.
Thanks,
Gilbert Lo
helpdesk at St. George's School
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hi, I am new to freeradius server.I want to use traffic limit in Freeradius How do i do that? Curretly we are using cisco edge routers for our ADSL server to authenticate free radius server,For Dialup we are using sendmax for to transfer request to free radius server.Now i want to do a traffic
Hello.
I'm having a curious problem with a vendor-specific single-byte
octets-attribute and attr_rewrite.
attr_rewrite att1 {
attribute = Vendor-Specific-Thingie
searchin = reply
searchfor = 0
replacewith = \000
}
Hello,
first you should read the
documentation of your NAS server. Find out what attributes does it need for
traffic limiting !
Regards,
Edvin
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Radhika
Sent: Montag, 12. Juni 2006 12:19
To:
Hi,Thanks for your reply.I am new this concepts and what presently we are using the below configuration i am not sure which is working as NAS.If you have any docs or idea please let me know.Sorry for asking basic questionsThanksSeferovic Edvin [EMAIL PROTECTED] wrote:
Hi,
for ADSL users, you
probably have some DSLAM or other ADSL server for PPPoE ! Look at
the documentation of one of those components and you will probably find
something out.
Regards,
Edvin
From:
Radhika [mailto:[EMAIL PROTECTED]
Sent: Montag, 12. Juni 2006 13:39
To:
I am on holiday between June 5 to June 9. I will return to my office on
June 12.
See you soon.
Thanks,
Gilbert Lo
helpdesk at St. George's School
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hello all
I am trying to use MySQL 5.0.19 Stored Procedure with Free Radius 1.1.
This is my Procedure
DELIMITER $$
DROP PROCEDURE IF EXISTS `radius`.`auth`$$
CREATE PROCEDURE `auth`(user1 varchar(100))
BEGIN
SELECT id, UserName, Attribute, Value, op FROM radius.radcheck WHERE
Username =user1
Hi,
I'm using freeradius 1.1.1 and trying to performance test it using as client
the 'radclient' utility program. I have been experiencing some problems when
load testing it since freeradius was responding in some cases responding to the
client with old (already sent) responses when in fact
I am having a little trouble getting freeRADIUS to work on my Cisco
1130AGs. If someone has experience using these with their radius server,
please respond with all the steps you have taken to have it work, e.g., where
and what you put in IOS and on what pages. I for the life of me can not
I am a new FreeRadius user and am attempting to switch to FreeRadius.
I am trying to switch from clients.conf to the MySQL NAS table. There is a
field named type which, per http://www.freeradius.org/radiusd/doc/README
has one of the values below. However, when I call our primary carrier, they
However, when I call our primary carrier, they
don't have that information and have never been asked that question.
They do NOT know what NAS they r using? Are they only a reseller ?
Unbelievable !
Regards,
Edvin Seferovic
-
List info/subscribe/unsubscribe? See
Stelio Gouveia [EMAIL PROTECTED] wrote:
So i tested the authentication by using the radtest tool locally with
valid users on my system.
Radius would respond with the following pattern:
Access-Accept, Access-Accept, Access-Reject. (There has been some
variations, but generally this pattern
Stelio Gouveia [EMAIL PROTECTED] wrote:
I have noticed that you cant rely on the sql method, even thou there is
a simul_count_query! In my case when i encounter a stale session i set
the AcctStopTime = AcctStartTime + AcctSessionTime. Although this seems
to work most of the time, its not fool
Cliff Hayes [EMAIL PROTECTED] wrote:
I am trying to switch from clients.conf to the MySQL NAS table. There is a
field named type which, per http://www.freeradius.org/radiusd/doc/README
has one of the values below. However, when I call our primary carrier, they
don't have that information and
Hi,
Is it possible to authenticate off of one ldap server
and/or off another ldap server. I have multiple ldap
servers that freeradius server needs to authenticate
off. If it is possible, how can I accomplish this? thanks...
__
Do You Yahoo!?
rabbtux rabbtux [EMAIL PROTECTED] wrote:
I want some users to only use one AP, while other users can use that
AP and other APs as well. I don't think the logic will work for my
case.
Yes, it will. Try it.
Alan DeKok.
-
List info/subscribe/unsubscribe? See
Antonio Matera [EMAIL PROTECTED] wrote:
Hi, I tried to configure my freeradius with EAP-PEAP auth with
accounting. My aim is to have unique account, in other words only one
user can access with the same user and password.
doc/Simultaneous-Use
In this way I suppose that I have enabled
Robles Rodriguez,Alejandro [EMAIL PROTECTED] wrote:
I'm using freeradius 1.1.1 and trying to performance test it using
as client the 'radclient' utility program. I have been experiencing
some problems when load testing it since freeradius was responding
in some cases responding to the client
Patrick Daley [EMAIL PROTECTED] wrote:
I am having a little trouble getting freeRADIUS to work on my Cisco
1130AG's.
See the FAQ for it doesn't work.
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
On Friday 09 June 2006 17:19, Alberto Cruz wrote:
These is the output from the commands:
[EMAIL PROTECTED] i386]# rpm -qp --provides freeradius-1.1.2-0.i386.rpm
config(freeradius) = 1.1.2-0
libradius-1.1.2.so
libradius-1.1.2.so.debug
radiusd
rlm_sql_mysql-1.1.2.so
Not sure how to check the value of that option when running in debug mode
as you mentioned. I started radiusd -x, but it doesn't list any options.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
Behalf Of Kevin Bonner
Sent: Friday, June 09, 2006 3:24 PM
To:
Hi,
I am having a little trouble getting freeRADIUS to work on my Cisco
1130AG's. If someone has experience using these with their radius
server, please respond with all the steps you have taken to have it
work, e.g., where and what you put in IOS and on what pages. I for the
life of me can
Thank you so much, it helped.
Thank you,
Patrick Daley
AgniTEK
979-260-8324 x304
[EMAIL PROTECTED]
www.agnitek.com
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
] On Behalf Of [EMAIL PROTECTED]
Sent: Monday, June 12, 2006 12:56 PM
To: FreeRadius users mailing
On Monday 12 June 2006 13:38, Cliff Hayes wrote:
Not sure how to check the value of that option when running in debug mode
as you mentioned. I started radiusd -x, but it doesn't list any options.
The lower-case x gives minimal output. The extended debug mode (-X) will
print out the config
Hi all
We are proxying a realm for a customer that takes ADSL
connections from us.
Our ADSL connections terminate on a Cisco 7204 over an L2TP
tunnel.
The proxying seems to be working fine as all requests for
the realm are sent to the customers radius server.
And our log files show
updated
for request 465
Processing the pre-proxy section of
radiusd.conf
modcall: entering group pre-proxy for
request 465
radius_xlat:
'/var/log/radius/radacct/212.248.232.242/pre-proxy-detail-20060612'
rlm_detail:
/var/log/radius/radacct/%{Client-IP-Address}/pre-proxy-detail-%Y%m%d expands
John Williams wrote:
However the users that are authenticating are being dropped offline as
soon as they authenticate.
The account logs show the reason as being “User-Request” although the
user hasn’t requested a disconnect, in fact they aren’t connected long
enough to do so.
The
Joe
I don't think our customer is sending any attributes that we don't send to
the Cisco ourselves. However I'll get him to send me a users entry and see
if that's the case before I turn all that debug on :)
If you see my previous email you'll see the radius debug I sent when one the
users tried
##
The strange thing is the Framed-IP-Address, it isn’t showing the correct
IP address that the user has assigned in our customer radius users file.
If I run radtest from the command line against the customers radius
server it returns:
If you get
Hi Guys.
I have radiusd 1.1.2 from the latest FreeBSD port crashing strangly
during a stress test.
I'm not sure where exactly it occurs because no core dump is produced.
Even when ran inside gdb, i can't get any backtrace info at all:
srv03# gdb /usr/local/sbin/radiusd
GNU gdb 6.1.1
The proxying seems to be working fine as all requests for the realm are
sent to the customers radius server.
And our log files show that the authentication was OK.
However the users that are authenticating are being dropped offline as
soon as they authenticate.
Let me guessyou
John Williams wrote:
Looking through the radius files I saw this in the attrs file:
##
# The rest of this file contains the DEFAULT entry.
# DEFAULT matches with all realm names.
#
DEFAULT
Service-Type == Framed-User,
Service-Type == Login-User,
Hello,
I am a new user trying to set up FreeRadius on Fedora 5. I purchased a copy
of Hassell's Radius book; didn't seem to help much.
I was able to get it to work with clients.conf
Then, I converted to MySQL. I think I'm supposed to copy the clients into
the nas table, so I did that, but the
Cliff Hayes [EMAIL PROTECTED] wrote:
Then, I converted to MySQL. I think I'm supposed to copy the clients into
the nas table, so I did that, but the table doesn't appear to be being used.
What do I have to do to use the table? Am I supposed to be using the table?
read sql.conf.
Alan
I'd be happy to try it, however, I'm a nubie to freeradius, not mysql or php.
I understand how to create groups and assign logins to them in the
various mysql database tables (usergroup,radcheck,etc), but when you
say to 'match' on a parameter do something as a result I'm a little
lost. Do I
How do you fix your problem? Should I add something else to the
freeradius.spec or should I have to include something else?
Hi Aland Dekok , is this is a bug for the RPM build process for RedHat
Enterprise 4.0?
Regards
Alberto Cruz
Kevin Bonner wrote:
On Friday 09 June 2006 17:19,
40 matches
Mail list logo
