Hello,
I just recently upgraded my freeradius install from 2.1.9 to 2.1.12, with the
purpose of using the replicate module.
I'm adding replicate to my accounting section, and then adding
Replicate-To-Realm += test1 to my acct_users.
Doesn't seem like I've had a chance to misconfigure it,
Hello,
First of all, I would like to express my utmost appreciation for being
able to use FreeRADIUS, most especially to everyone involved in the development.
In this regard, I tried accessing the Report a Bug link
(http://bugs.freeradius.org/) posted in FreeRADIUS official web site.
However,
Sorrell, Chadwick wrote:
I’m adding replicate to my accounting section, and then adding
Replicate-To-Realm += test1 to my acct_users.
OK.
Doesn’t seem like I’ve had a chance to misconfigure it, since when I
start radiusd –X, I get: Failed to load module “replicate”.
There are usually
endo mitsuharu wrote:
First of all, I would like to express my utmost appreciation for being
able to use FreeRADIUS, most especially to everyone involved in the
development.
Thanks.
In this regard, I tried accessing the Report a Bug link
(http://bugs.freeradius.org/) posted in FreeRADIUS
You can create another instance of rlm_files module that is using
Calling-Station-Id as a key:
# raddb/modules/callingids
files callingids {
key = %{Calling-Station-Id}
usersfile = %{confdir}/callingids
acctusersfile = %{confdir}/acct_callingids
preproxy_usersfile =
ZZ Wave wrote:
Help me please. Can't figure out how to authenticate my PBX calls only
by Calling-Station-Id attribute, without username. /etc/raddb/users is
useless here, right?
You can still use it
DEFAULT Calling-Station-Id = 12345, Auth-Type := Accept
Alan DeKok.
-
List
On 6 Sep 2012, at 07:54, endo mitsuharu endo@ncos.nec.co.jp wrote:
Hello,
First of all, I would like to express my utmost appreciation for being
able to use FreeRADIUS, most especially to everyone involved in the
development.
In this regard, I tried accessing the Report a Bug link
On 6 Sep 2012, at 09:24, Arran Cudbard-Bell a.cudba...@freeradius.org wrote:
On 6 Sep 2012, at 07:54, endo mitsuharu endo@ncos.nec.co.jp wrote:
Hello,
First of all, I would like to express my utmost appreciation for being
able to use FreeRADIUS, most especially to everyone involved
On Thu, Sep 6, 2012 at 3:25 PM, Arran Cudbard-Bell
a.cudba...@freeradius.org wrote:
I would like to refer to the existing bug report, so I would like to ask
if bugs.freeradius.org is dead or if the URL has been changed.
(or is it just me.)
It's dead. A certain project leader was meant to put
Fajar A. Nugraha wrote:
How about the wiki? Is it's current state (no front page) intentional?
No.
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
On 6 Sep 2012, at 10:14, Alan DeKok al...@deployingradius.com wrote:
Fajar A. Nugraha wrote:
How about the wiki? Is it's current state (no front page) intentional?
No.
Apparently the repo has somehow got corrupted, attempting to restore from the
daily backup now.
-Arran
-
List
UEX Ana Gallardo Gómez wrote:
This was asked many, many, times. And answered.
Go read the responses to your messages.
If you're not going to read the list, then don't post questions here.
And stop posting this question.
Alan DeKok.
-
List info/subscribe/unsubscribe? See
Arran Cudbard-Bell wrote:
Apparently the repo has somehow got corrupted, attempting to restore from the
daily backup now.
Done.
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
to make entire freeradius.
./configure --with-experimental-modules --with-rlm_eap2 LIBS=-ldl
--
Regards,
Swaraj
-- next part --
An HTML attachment was scrubbed...
URL:http://lists.freeradius.org/pipermail/freeradius-devel/attachments/20120906/16a2ec3f/attachment.html
On 06/09/12 10:52, Alan DeKok wrote:
UEX Ana Gallardo Gómez wrote:
This was asked many, many, times. And answered.
Go read the responses to your messages.
If you're not going to read the list, then don't post questions here.
I almost wonder if he is not getting list mail somehow!
This was asked many, many, times. And answered.
Ok, sorry to ask about that one more time.
I though that if I can work with Codigo-Reject attribute in Post-Auth
type Reject for EAP-TTLS-PAP and EAP-TTLS-MsCHAPv2, I would do the same in
PEAP.
I read
Ana Gallardo Gómez wrote:
I though that if I can work with Codigo-Reject attribute in Post-Auth
type Reject for EAP-TTLS-PAP and EAP-TTLS-MsCHAPv2, I would do the same
in PEAP.
No.
All, EAP-TTLS-PAP, EAP-TTLS-MsCHAPv2 and PEAP are EAP methods...
Really? I didn't know that.
Go
hi again all fine with redundant-load-balance {sql1 sql2}
now .. have a different issue with that... when i set sql with 2 sql server
for balance.. in the monthlysession i have sql_modinst = sql
and have noop check because sql is not define ok... so, i do in 1 server
sql_modinst = sql1 and the
Tony Peña wrote:
hi again all fine with redundant-load-balance {sql1 sql2}
now .. have a different issue with that... when i set sql with 2 sql
server for balance.. in the monthlysession i have sql_modinst = sql
and have noop check because sql is not define ok... so, i do in 1 server
On 6 Sep 2012, at 14:44, Tony Peña emperor...@gmail.com wrote:
hi again all fine with redundant-load-balance {sql1 sql2}
now .. have a different issue with that... when i set sql with 2 sql server
for balance.. in the monthlysession i have sql_modinst = sql
and have noop check because
Greetings to all,
I would like to achieve the following functionality: in case a user's
AUTHENTICATION fails, the user should not be rejected but be given an
accept response with specific attributes.
The reason behind this is to provide a captive portal functionality for
users having wrong
Kostas Zorbadelos wrote:
I would like to achieve the following functionality: in case a user's
AUTHENTICATION fails, the user should not be rejected but be given an
accept response with specific attributes.
You can't turn a reject into an accept.
You'll have to compare the passwords
On 6 Sep 2012, at 15:10, Kostas Zorbadelos kzo...@otenet.gr wrote:
Greetings to all,
I would like to achieve the following functionality: in case a user's
AUTHENTICATION fails, the user should not be rejected but be given an
accept response with specific attributes.
The reason behind
cool...
works great...
setting 2 instance monthlycounter monthlycounter1 { bla } and 2 the same
rules... about it..
and in authorization session reundant-load-balance {monthlycounter1
monthlycounter2} works fine i got balance in the queries like sql1 and
2 accounting,..
good work team...
;-)
hey... again...
at sqlcounter.conf i can't stripped-user-name
if i used in dialup.conf why sqlcounter got at 1st time stripped-user-name
and in the sql action use full username form NAS?
check the log
[monthlycounter1] sql_set_user escaped user -- 'griseramirez'
[monthlycounter1] expand:
--sites-enabled/default--
preacct {
preprocess
replicate
#
# Read the 'acct_users' file
files
}
radiusd -X output...
Thu Sep 6 13:49:15 2012 : Debug: Module: Checking preacct {...} for more
modules to load
Thu Sep 6 13:49:15 2012 : Debug: (Loaded
Hello!
We are using freeradius as dhcp server about two years. Its working
wery well, but.
We have all the DHCP logic written in rlm_perl script.
Now we have load ~900-1200 dhcp queries per sec, but 70% of them are
ignored(dependents of a vlan in option 82 (part of
On Fri, Sep 7, 2012 at 12:51 AM, Sorrell, Chadwick
chadwick.sorr...@cinbell.com wrote:
--sites-enabled/default--
preacct {
preprocess
replicate
I'm pretty sure preacct is not the righth place. Did you read
raddb/modules/replicate?
Online copy:
I have read the documentation on it, and you are right preacct isn't listed
there. I've tried it in authorize and accounting before preacct and it's all
the same error.
Thu Sep 6 15:27:46 2012 : Error:
/usr/local/etc/raddb/sites-enabled/default[344]: Failed to load module
replicate.
Thu Sep
Здравствуйте, Ilya.
Вы писали 6 сентября 2012 г., 21:52:23:
Hello!
We are using freeradius as dhcp server about two years. Its working
wery well, but.
...
Heh, sorry, I found the solution =)
Somethink like this for example, to ignore vlan #1 (default on most
devices):
if(
On Fri, Sep 7, 2012 at 2:27 AM, Sorrell, Chadwick
chadwick.sorr...@cinbell.com wrote:
I have read the documentation on it, and you are right preacct isn't listed
there. I've tried it in authorize and accounting before preacct and it's all
the same error.
Thu Sep 6 15:27:46 2012 : Error:
Heh, sorry, I found the solution =)
Somethink like this for example, to ignore vlan #1 (default on most
devices):
if( %{DHCP-Relay-Circuit-Id} =~
/^0x([0-9a-f]{4})0001([0-9a-f]{4})$/i ) {
reject
}
Wow. After using this code ^ and also this (filter
Must be my FreeBSD install, I just spun up a Ubuntu install and used the same
config and it works like a charm. Weird.
-Original Message-
From:
freeradius-users-bounces+chadwick.sorrell=cinbell@lists.freeradius.org
me tons of errors.
--
Regards,
Swaraj
-- next part --
An HTML attachment was scrubbed...
URL:http://lists.freeradius.org/pipermail/freeradius-devel/attachments/20120906/16a2ec3f/attachment.html
--
-
List info/subscribe/unsubscribe? Seehttp
34 matches
Mail list logo