Re: WARNING! for check item

2013-02-22 Thread Phil Mayers
On 02/21/2013 09:56 PM, a.l.m.bu...@lboro.ac.uk wrote: what exactly is wrong here that is triggering this WARNING ? Presumably that, since it's an internal attribute (255) it'll never be send on the wire anyway, so filtering it makes no sense. - List info/subscribe/unsubscribe? See

Re: eap over lan simulation

2013-02-22 Thread Phil Mayers
On 02/22/2013 02:56 AM, tabibel sami wrote: between supplicant and nas, i can't find a way to simulate a NAS (Point ACCESS) with 802.1x supplicant thant can controle ethernet and not wireless access from supplicant, because i use linux bridge to connect my virtuel machines to each others (so no

Server exits without warning on radtest‏

2013-02-22 Thread Adrien Morvan
HelloI'm facing a problem with the server. I set it and test it with a basic radtest and it exits without warning or error message.The last line is Thu Feb 21 08:33:14 2013 : Info: +- entering group authorize {...}So i guessed there was a problem in the very beginning of authorize, as the

Re: Server exits without warning on radtest‏

2013-02-22 Thread Olivier Beytrison
Le 22.02.2013 09:30, Adrien Morvan a écrit : Hello I'm facing a problem with the server. I set it and test it with a basic radtest and it exits without warning or error message. The last line is Thu Feb 21 08:33:14 2013 : Info: +- entering group authorize {...} So i guessed there was a

MAC Authentication with FreeRadius

2013-02-22 Thread Bouchra Badri
Hi, 1 - I was wondering if going through the tuto in wiki.freeradius is necessary to be able to authenticate using the mac address ? For one, that rewrite_calling_station_id generates an error at the run of freeradius, plus I've seen some tutos that say that cisco Mac-auth-Bypass can do the

Re: MAC Authentication with FreeRadius

2013-02-22 Thread A . L . M . Buxey
Hi, 1 - I was wondering if going through the tuto in wiki.freeradius is necessary to be able to authenticate using the mac address ? For one, that rewrite_calling_station_id generates an error at the run of freeradius, plus I've seen some tutos that say that cisco Mac-auth-Bypass

Re: proxy the radius server

2013-02-22 Thread A . L . M . Buxey
Hi, I want to configure the proxy from my free radius to another free radius server How do i do that ??? please help you need to look at proxy.conf and clients.conf - the server sending stuff AWAY needs to have proxy.conf configured and

Re: MAC Authentication with FreeRadius

2013-02-22 Thread Bouchra Badri
Hello, thanks for the quick answer Cisco MAB is a *method* you configure on the switch. it still needs a backend to send the request to - eg a RADIUS server Yes, of course I'll have to use a Radius server, and many forums say that if you put the Mac address in both username and password,

Re: proxy the radius server

2013-02-22 Thread Muhammad Nadeem
as Alan already asked, that you should read some thing about Proxy. There is an excellent documentation in proxy.conf file. If you carefully read that document, you will easily configure proxy. On Fri, Feb 22, 2013 at 4:57 PM, Lakshmi Narayana Baliah lb0074...@techmahindra.com wrote: Hi

Re: MAC Authentication with FreeRadius

2013-02-22 Thread A . L . M . Buxey
Hi, Yes, of course I'll have to use a Radius server, and many forums say that if you put the Mac address in both username and password, it will authenticate if - in the switch - you use Mab... And that's exactly what I tried to do, but it did not authenticate... Am I doing sth

Re: MAC Authentication with FreeRadius

2013-02-22 Thread Bouchra Badri
Great. Thank you good sir. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

Re: Re: Server exits without warning on radtest‏

2013-02-22 Thread Adrien Morvan
Thanks So i ran it with gdb. There is a seg fault but i don't understand what is happening. I just noticed the 0xdeadbeef value. Program received signal SIGSEGV, Segmentation fault. rad_mangle (request=0x82ba520, data=optimized out) at rlm_preprocess.c:217 217request_pairs =

Re: Server exits without warning on radtest‏

2013-02-22 Thread Phil Mayers
On 22/02/13 15:10, Adrien Morvan wrote: Thanks So i ran it with gdb. There is a seg fault but i don't understand what is happening. I just noticed the 0xdeadbeef value. Program received signal SIGSEGV, Segmentation fault. rad_mangle (request=0x82ba520, data=optimized out) at

Re: Re: Server exits without warning on radtest‏

2013-02-22 Thread Adrien Morvan
I changed my version of freeradius to the 2.2.0 and my radtest is working now. So thank you for the support. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

Re: Server exits without warning on radtest?

2013-02-22 Thread Alan DeKok
Adrien Morvan wrote: So i ran it with gdb. There is a seg fault but i don't understand what is happening. That's OK. What is *not* OK is refusing to follow the instructions in doc/bugs. We need that information to help solve the problem. By refusing to follow the documentation, you're

stack allowances

2013-02-22 Thread Jed Gainer
freeradius 2.2.0-3 sqlcounter counterChilliSpotMaxTotalOctetsDaily { counter-name = ChilliSpot-Max-Total-Octets-Daily check-name = CS-Total-Octets-Daily counter-type = data reply-name = ChilliSpot-Max-Total-Octets sqlmod-inst = sql