Hi!
YvesDM wrote:
How i can use nas identifier attribute?? client.conf needs an ip
however ?? i'm very confused.
In clients.conf use 0.0.0.0/0 and make sure your
shared secret is long and strong.
A small note if you really want to do this: in 2.0, this will only match
for the
Hi Oxiel!
I've added the Alcatel-Auth-Group attribute to dictionary.alcatel like these:
ATTRIBUTE Alcatel-Auth-Group 134 integer
and modified users file like these:
Tunnel-Type += 13,
Tunnel-Medium-Type += 6,
Alcatel-Auth-Group += 3
I'm afraid you added
Hello!
Have you checked the documentation for the Omniswitch to verify that it
supports this? If I send back the same attributes on my wireless access
points, it works perfectly (we do this in production). The AP's, however,
support that.
I'll check it again, it's became difficult
Lin Richardson wrote:
You should post this to thet userlist (I am cc'ing them on this
reply). Perhaps someone there has seen the false cru error before...
I'm no compiler guru, but google tells me that libtool may be to blame.
I don't acutally show libtool installed on my box and don't know
Nicolas Baradakis wrote:
I'd like to set it up with the commandline switch (-i ip-addr), but
this does not seem to work (tested on versions 0.2, 1.0.1 and 1.2): the
server only takes the address from the configuration file and completely
ignores the commandline switch. I do realise that the
Nicolas Baradakis wrote:
I'd like to set it up with the commandline switch (-i ip-addr), but
this does not seem to work (tested on versions 0.2, 1.0.1 and 1.2): the
server only takes the address from the configuration file and completely
ignores the commandline switch. I do realise that the
Hello,
I'm trying to setup FreeRADIUS in a testing setup where the IP address
to which it binds needs to be set. The RADIUS server is loaded on-demand
on a number of machines, where almost all configuration is the same,
except for the IP address to which it needs to listen.
Normally this
7 matches
Mail list logo