Hi,
I know this subject have been brought up but I'm kind of stuck and I hope
I can get a little help.
I am trying to assign vlans from freeradius to a cisco 3550 switch but its
not working.
I keep getting the following in the debug in the switch:
3w6d: RADIUS:
Hi Alan and thanks for your reply,
I changed it as you suggested and I still got the same behavior:
Users
wassim Cleartext-Password := wassim
Tunnel-Medium-Type = IEEE-802,
Tunnel-Type = VLAN,
Tunnel-Private-Group-Id = 100
Radiusd -X:
# Executing section post-auth from
On 04/25/2012 08:52 AM, Wassim Zaarour wrote:
Hi Alan and thanks for your reply,
I changed it as you suggested and I still got the same behavior:
You're sending the right replies; the problem is with the NAS. Suggest
you consult the Cisco docs.
The 3550 is an older switch; are you sure it
Hi Phil,
Look at this
http://www.mail-archive.com/freeradius-users@lists.freeradius.org/msg40162.
html
The user says that it worked, I tried the attributes he used and still got
the same error.
On 4/25/12 11:10 AM, Phil Mayers p.may...@imperial.ac.uk wrote:
On 04/25/2012 08:52 AM,
@lists.freeradius.org
[mailto:freeradius-users-bounces+davidp=wirelessconnections.net@lists.freera
dius.org] On Behalf Of Wassim Zaarour
Sent: Wednesday, April 25, 2012 1:56 AM
To: FreeRadius users mailing list
Subject: Assign VLAN from freeradius to Cisco 3550 switch.
Hi all,
I know this subject have been
On 25/04/12 09:28, Wassim Zaarour wrote:
Hi Phil,
Look at this
http://www.mail-archive.com/freeradius-users@lists.freeradius.org/msg40162.
html
The user says that it worked, I tried the attributes he used and still got
the same error.
Then logically, the problem is at your end. Check the
: Wednesday, April 25, 2012 1:50 PM
To: FreeRadius users mailing list freeradius-users@lists.freeradius.org
Subject: RE: Assign VLAN from freeradius to Cisco 3550 switch.
I am seeing EAP in the messages. Have you enabled EAP in your inner-tunnel
or at all in your config?
Either way this seems pretty
Wassim Zaarour wrote:
Look at this
http://www.mail-archive.com/freeradius-users@lists.freeradius.org/msg40162.html
The user says that it worked, I tried the attributes he used and still got
the same error.
I don't even know how this was ever working for that user. On my wired switch
Hi Brian,
Thanks for your reply, where do I exactly need to put this configuration?
In the users file?
Do you have any experience with the 2960 switches?
Wassim
On 4/25/12 4:07 PM, Brian Julin bju...@clarku.edu wrote:
Wassim Zaarour wrote:
Look at this
Hi,
Thanks for your reply, where do I exactly need to put this configuration?
In the users file?
I can tell you right now that you dont need that hack to assign VLANs on cisco
switches (well, not if you are running reasonably up to date firmware on the
cisco devices anyway - ie something less
Alan Buxley wrote
I can tell you right now that you dont need that hack to assign VLANs on cisco
switches (well, not if you are running reasonably up to date firmware on the
cisco devices anyway - ie something less than 2 years old)
The latest public firmware for the 3550 is 3+ years old,
11 matches
Mail list logo
