This debate is off-topic and I've moved it off-list.
Dne torek 08 februar 2005 14:08 je Ãystein GÃsdal napisal(a):
>
> > > Anyway, have you been able to authenticate at a very early
> > stage, so
> > > logon scripts can be used with SecureW2?
> > > If not, are there other supplicants that suppo
> > Anyway, have you been able to authenticate at a very early
> stage, so
> > logon scripts can be used with SecureW2?
> > If not, are there other supplicants that support that?
>
> I had no need for that, but it is documented in the new
> http://www.securew2.com/uk/resources/index.htm#Advanc
Hello Ãystein.
Dne ponedeljek 07 februar 2005 12:54 je Ãystein GÃsdal napisal(a):
> I see that the example in the link uses PAP instead of EAP?
That is correct. We use EAP-TTLS+PAP.
> When I try to use that, the supplicant does not try to authenticate at all,
> exept when I go to User account, a
005 14:56
> To: freeradius-users@lists.freeradius.org
> Subject: Re: Problems with ttls using SecureW2
>
> Hello Øystein.
>
> Dne petek 04 februar 2005 08:37 je Øystein Gåsdal napisal(a):
>
> > I think Alan wrote that the job with getting ttls to work
> was to set
>
Thanks for the suggestions, I'll look into them.
Again, thank you for your help.
> -Original Message-
> From: Rok Papez [mailto:[EMAIL PROTECTED]
> Sent: 4. februar 2005 14:56
> To: freeradius-users@lists.freeradius.org
> Subject: Re: Problems with ttls using
Hello Ãystein.
Dne petek 04 februar 2005 08:37 je Ãystein GÃsdal napisal(a):
> I think Alan wrote that the job with getting ttls to work was to set up tls
> properly... Freeradius works with the built-in 802.1x supplicant, so I guess
> that tls is in fact set up properly?
>
> In eap.conf i have
> Under Configure in SecureW2, under Authentication, the Authentication
> Method EAP, is selected, and EAP type is PEAP.
If you want to use TTLS you should not tell SecureW2 to do PEAP but TTLS.
> I think Alan wrote that the job with getting ttls to work was to set up tls
> properly... Freeradius
Hi again!
I've decided to try the now open source SecureW2 supplicant, because I don't
think the built-in supplicant in WinXP is any good, especially when logging
in to NT Domains.
Anyway, when I try that, I encounter a problem, the Freeradius debug gives
med this error:
I'm just pasting the line
8 matches
Mail list logo