So, I made sure all of our settings were configured correctly in
proxy.conf and in clients.conf. the way we tested, was i had the IAS
server set the reply message to yes like John mentioned. This helped
a great deal.
What's happening, is when i use the radclient to auth DIRECTLY to the
IAS
Ian Savoy wrote:
What's happening, is when i use the radclient to auth DIRECTLY to the
IAS server, i get an Access-Accept response. However, when i use the
proxy, they are receiving an encrypted password...either that or an
incorrectly encrypted password that cannot be decrypted by their
by the way, we are dealing with freeradius 1.1.3.
Ian Savoy wrote:
Does anyone have any specific tweaks to get MS IAS and freeradius
talking? We're trying to share resources with another isp in the area
- their IAS server needs to be able to auth against our freeradius
server, and visa
Realms
Jory Privett
WCCS
- Original Message -
From: Ian Savoy [EMAIL PROTECTED]
To: FreeRadius users mailing list freeradius-users@lists.freeradius.org
Sent: Wednesday, May 16, 2007 3:29 PM
Subject: Re: freeradius = MS IAS passthrough
by the way, we are dealing with freeradius 1.1.3
:29 PM
Subject: Re: freeradius = MS IAS passthrough
by the way, we are dealing with freeradius 1.1.3.
Ian Savoy wrote:
Does anyone have any specific tweaks to get MS IAS and freeradius
talking? We're trying to share resources with another isp in the area
- their IAS server needs
]
To: FreeRadius users mailing list freeradius-users@lists.freeradius.org
Sent: Wednesday, May 16, 2007 3:37 PM
Subject: Re: freeradius = MS IAS passthrough
Ya, we have realms setup, however we're failing to auth against each
other.
Jory Privett wrote:
Realms
Jory Privett
WCCS
- Original Message -
From: Ian Savoy [EMAIL PROTECTED]
To: FreeRadius users mailing list freeradius-users@lists.freeradius.org
Sent: Wednesday, May 16, 2007 3:37 PM
Subject: Re: freeradius = MS IAS passthrough
Ya, we have realms setup, however we're failing to auth against each
other
Never say:
it just doesn't work.
show us. Run radiusd -X and show us what is happening when you try and
tell us what you think should be happening.
--
Dennis Skinner
Systems Administrator
BlueFrog Internet
http://www.bluefrog.com
-
List info/subscribe/unsubscribe? See
On Wed 16 May 2007, Ian Savoy wrote:
Ya, we have realms setup, however we're failing to auth against each
other.
Then you either have the wrong shared secret between your 2 servers, or you
are testing the wrong user/password. What you are trying to do is trivial
and covered by the
On Wed, 2007-05-16 at 17:12 -0400, Ian Savoy wrote:
Is there anything else?
Hi,
Not sure if it's still relevant but with our IAS servers the sysadmin
made sure it set the reply message to yes. If you test from freeradius
to the IAS server using the 'radtest' command, and run freeradius as
10 matches
Mail list logo