Hi all,
problem is in 3com switch. I found in 3com
knowledge base a record about similar 3com
Baseline switches and only EAP not PEAP is
supported.
This ugly device also doesn't allow to pass
through auth traffic for another connected
devices. Is not possible to authorize via
IEEE 802.1x wifi AP
Thanks for reply. I tried to change default_eap_type
in main eap section but it doesn't work.
I tried also dozens combinations of configuration
but authorization process doesn't continue after
establishing SSL tunnel and sending Access Challenge
to the 3com switch
Lukas Lisa
Madwifi Wireless
[EMAIL PROTECTED] wrote:
I would like to authorize windows clients access to 3com Baseline
Switch 2948 SFP against FreeRADIUS server 2.0.5.
Windows are cofigured to use PEAP - EAP-MSCHAPv2.
Server certificate was created with bootstrap script (xpextensions
are included).
I tried windows
I tried windows xp sp3 and linux (wpa_supplicant) client and both
cause the same server output and authorization can't pass.
Testing tools eapol_test, radeapclient and jRadiusSimulator can pass
all tests fine.
Your supplicant has issues then. Examine eapol.log file (XP):
[EMAIL PROTECTED] wrote:
I tried windows xp sp3 and linux (wpa_supplicant) client and both
cause the same server output and authorization can't pass.
Testing tools eapol_test, radeapclient and jRadiusSimulator can pass
all tests fine.
Your supplicant has issues then. Examine eapol.log file
You should post that on wpa_supplicant list. Google returned this as
likely:
http://ubuntuforums.org/archive/index.php/t-604576.html
Ivan Kalik
Kalik Informatika ISP
Dana 29/10/2008, Lukas Lisa [EMAIL PROTECTED] piše:
[EMAIL PROTECTED] wrote:
I tried windows xp sp3 and linux
[EMAIL PROTECTED] wrote:
You should post that on wpa_supplicant list. Google returned this as
likely:
http://ubuntuforums.org/archive/index.php/t-604576.html
i saw similar posts yet but i never reached this state:
CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully
only
Hello,
I would like to authorize windows clients access to 3com Baseline
Switch 2948 SFP against FreeRADIUS server 2.0.5.
Windows are cofigured to use PEAP - EAP-MSCHAPv2.
Server certificate was created with bootstrap script (xpextensions
are included).
I tried windows xp sp3 and linux
I am not an expert on this but I think here is the problem. Under *eap*
you have this:
eap ###
eap {
default_eap_type = md5
timer_expire = 60
ignore_unknown_eap_types = no
I would like to authorize windows clients access to 3com Baseline
Switch 2948 SFP against FreeRADIUS server 2.0.5.
Windows are cofigured to use PEAP - EAP-MSCHAPv2.
Server certificate was created with bootstrap script (xpextensions
are included).
I tried windows xp sp3 and linux (wpa_supplicant)
10 matches
Mail list logo