-Original Message-
I'm assured that Windows Vista now
has a proper 'do not cache this' feature ;-)
It does.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
It sounds like your trying to encrypt the shared secret in the router
config. Or, your trying to copy the encrypted shared secret and paste
it. (The 7 is what tipped me off)
First, you need to verify that you have the password-encryption is
enabled in the IOS. This is the magic that makes
One further comment.
The shared secret in FreeRADIUS CANNOT be the really long number in
the IOS config file. This is an encrypted hash of the REAL secret.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-Original Message-
So the piece of confusion is how you get that encrypted hash
in there in the first place when configuring a new key.
Service password-encryption
http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_command_
Read the last two days on the mailing list archives. It's all they've
been talking about.
It seems to work. But i see freeradius 1.1.6 correct a bug about
HUP.
-
List info/subscribe/unsubscribe? See
My first FreeRadius Post, and I don't think I can answer your problem,
but I think I can clarify the problem.
When you configure the MSCHAPv2 properties in the Windows client, you
are selecting Automatically Use my Windows Username and Password (And
Domain if available) You get the error you
Is there a How-to on using FreeRADIUS / PEAP / Active Directory
I've been trying to hobble along with
http://www.dslreports.com/forum/remark,9286052~mode=flat
But it wasn't for this specific instace.
I'm dying right now on this
snip
modcall: entering group authenticate for request 1
and Active Directory
King, Michael [EMAIL PROTECTED] wrote:
/usr/local/sbin/radiusd: relocation error:
/usr/local/lib/rlm_eap_peap-1.0.2.so: undefined symbol: eaptls_process
Yuck. You're running an unfriendly OS.
The simplest way to fix this is to re-build re-install the server
via
The --disable-shared fixed that problem, and I replaced all the
certificates and I was successfully able to logon via TLS, and low and
behold. PEAP works now too.
Thanks.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Ok, scratch half of my last message. I left it configured for TLS.
PEAP isn't working for me.
I'm getting this failure:
Processing the authenticate section of radiusd.conf
modcall: entering group Auth-Type for request 14
rlm_mschap: No User-Password configured. Cannot create LM-Password.
Ok. I have it working. Wohoo! Ntlm_auth was killing me for a while,
but I got that straightened out.
Now comes the corner cases. 25% of my users probably didn't follow the
directions we published, and didn't put the domain name in the Microsoft
802.1x client box.
Is there a way to construct
5 more minutes of testing,
I tired
ntlm_auth --request-nt-key --username=%{mschap:User-Name}
--challenge=%{mschap:Challenge} --nt-response=%{mschap:NT-Response}
On a whim, and it worked (removed domain from ntlm_auth)
Sorry for the excess question.
-
List info/subscribe/unsubscribe? See
See Step 2 in this webpage
http://www.dslreports.com/forum/remark,9286052~mode=flat
It worked for me.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Zuromski, Brian
Sent: Thursday, April 28, 2005 12:32 PM
To: 'freeradius-users@lists.freeradius.org'
Has anyone figured a way to authenticate the computer account in Active
Directory? Other than pGina. I don't have the option of changing the
client OS.
radius_xlat: Running registered xlat function of module mschap for
string 'NT-Response'
radius_xlat: '/usr/bin/ntlm_auth --request-nt-key
Could you share your proxy config? I have a radius server (Funk Steel
Belted Radius) that can do machine authentications.
Thanks.
Mike
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Michael Griego
Sent: Thursday, April 28, 2005 3:13 PM
To:
Alan DeKok wrote:
What's so special about machine authentication?
Short Version. (Forgive my use of nomenclature)
When your sitting at a logon prompt at windows (Hit CTRL-ALT-DELETE), it
(the client machine) has no user credentials to perform an 802.1x
session. Hence, it has no network
Before this get's too much further.
You are experiencing a hard time because you have not done any research
on your own, you are just asking for help.
Especially when many howto's / write up's exist on the exact subject you
are inquiring about.
For people with no sense of humor
-Original Message-
On Behalf Of Joseph Abadi
I then configured the access point, but., when I
try to join the wireless network on a win xp client, it hangs
... no authentication happens, it never prompts me for a
username or a password. It simply hangs stating that windows
Do not comment TLS.
TLS is required to Make TTLS work. (TTLS uses the TLS section)
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Bruno Quintas
Sent: Wednesday, June 15, 2005 2:24 PM
To: FreeRadius users mailing list
Subject: Re: FR eap-ttls
We're going to be setting up a freeRADIUS server to service around 400
simultaneous connections. (500 AP's, 4000 users, about 400 online at
once) Accounting info would be on another different server.(Not part of
FreeRADIUS)
What's a good server for this? What's more important? Memory or CPU?
If the AP's are wireless, then CPU is more important, as
EAP uses SSL, which has a large CPU impact.
Would FreeRADIUS take advantage of a Dual CPU system?
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Active Directory has this support. I'm not sure how it's used, but I
know it's there.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of ksochack
Sent: Thursday, August 11, 2005 10:56 AM
To: FreeRadius users mailing list
Subject: Deploying
I currently have our wireless users authenticating to our Active
Directory 2003 domain using PEAP and TTLS.
We want to proxy our machine authentications off to something else that
can authenticate them.
Does anyone have any examples of how to do this?
I know all the machine accounts show up on
-Original Message-
From: [EMAIL PROTECTED]
Behalf Of Armin Krämer
Hi, I set up freeradius with eap-tls and after I generated my
certificates with TinnyCA and configured it in eap.conf File
I get this error message...Does anyone knows what causes this error?
Thanks Armin
I wonder if it's this one?
http://www.cisco.com/univercd/cc/td/doc/product/voice/sipproxy/radiusps/
radpreau.htm
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Alan DeKok
Sent: Wednesday, October 05, 2005 2:01 PM
To: FreeRadius users mailing
Has any thought been given on adding the WPS (Wireless Provisioning
Service) Protocol to FreeRADIUS?
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/randz/p
rotocol/portal_wireless_provisioning_service_protocol.asp
It sounds really cool in theory.
From:
So what is the radwtmp and what is it's purpose?
Mine's at 500 megs, and growing. I'm wondering if I should get
concerned, since I might have misconfigured something.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Oh, excellent. I just joined this list hoping to query the
members on finding more information on doing
wireless+activedirectory+freeradius,
unfortunately I could not find any good postings, or web
toots/examples.
Hi Robin, Welcome to the club.
I would need to use Microsoft IAS. Is
Hi Robin
-Original Message-
I have one Debian specific error
rlm_eap: Failed to link EAP-Type/tls: rlm_eap_tls.so: cannot
open shared object file: No such file or directory
radiusd.conf[9]: eap: Module instantiation failed.
it seems that the shared object is not shipped when
Thank you.
I'm a relative new Debian addict, so I was unaware of the repercussions.
I learned something today, time to go home. :-)
I'll throw that into my notes. Based on the list activity in the last
few days, I'm hoping to reformat, and make clearer my notes. Seems
there is a need for
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Christian Poessinger
Sent: Tuesday, November 29, 2005 10:12 AM
To: 'FreeRadius users mailing list'
Subject: RE: WLAN 802.1x FreeRadius with LDAP
auth: type EAP
Processing the authenticate
-Original Message-
Zoltan Ori wrote:
You have ntlm_auth in your mschap configuration. You don't want that
for LDAP.
You don't need anything NT in that module. The default configuration
had everything commented out but authtype = MS-CHAP. Start with that
and then add what you
I have a single user that cannot associate to a AP. By chance, it's
actually me.
I'm failing 802.1x authentication . (We're using PEAP, with the XP
client) with FreeRadius talking to AD
Other users get on the AP fine.
Watching the radius.log I see this error message. (I have not had a
chance
Several clients
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
debik
Sent: Monday, December 05, 2005 6:30 PM
To: FreeRadius users mailing list
Subject: XP auth + PEAP
Have enybody
Just to further my own knowledge.
-Original Message-
Charles Blake wrote:
I am trying to set up a freeradius-1.1.0 server for authenticating
users using MS-CHAP passwords.
I pretend to authenticate users against shadow.
You can't do that.
MS-CHAP requires the NT
So I'm setting up my freeRADIUS server to use Active Directory.
I am closely mirror my existing installation.
However, I receive this error message while running /usr/sbin/freeradius
-X -A . (Which is one I did not encounter last time) (I have trimmed
it to what I hope is the pertinent section)
-Original Message-
On Behalf Of Phil Mayers
It is supposed to be like that. It's been like that forever
as far as I know. I don't know why it was working for you -
is your samba from an OS package and it's possible they
changed the perms?
(It's even worse on RHEL4 systems -
-Original Message-
yes ssl, is fun :-)
now i have another problem, it seems that the the peap module
isnt loading... because when i will compile ./configure
rlm_eap_tls or other ssl modules he says me that iv not
installed openssl but i have installed it.
whats the
Has anyone gotten Machine Authentication with PEAP working?
rad_recv: Access-Request packet from host 10.0.1.21:32768, id=2,
length=342
User-Name = host/boy-it-tel-2528.campus.bridgew.edu
Calling-Station-Id = 00-0B-7D-1B-B0-BA
Called-Station-Id =
-Original Message-
[mailto:[EMAIL PROTECTED]
adius.org] On Behalf Of james
Sent: Thursday, March 09, 2006 3:06 PM
From my experience this means the credentials the machine is sending
are
wrong or your version of samba is too old - get 3.0.21c (or at least
3.0.21a)
Regards,
-Original Message-
If it helps, this the ntlm command (which i think you have correct):
/usr/bin/ntlm_auth --request-nt-key --username=cse-mpr$
--challenge=4de0a9c09623ab12
--nt-response=d4b9516b28ba1760f8d31f8ac2b257d74a2439b9e104a102
- are you passing the domain correctly? (i
So I built 1.1.1 on Debian.
After a period of so many hours (variable) it stops responding.
(Sometimes 2hours, sometimes 16hours)
Now here's where it get's weird, (and makes me suspect it might not be
freeRADIUS at the root cause)
If I stop and restart the freeRADIUS service, it continues to
I'm running it in debug mode (and piping it to a file)
Freeradius -X -A crash.log
After a few hours this is what I got.
On the command line.
rad2:/home/mking# /usr/sbin/freeradius -X -A crash.log
Killed
rad2:/home/mking#
The last few lines from the log file are
rlm_eap: Request found,
Mine seg faulted as well..
(This time I didn't overwrite the log)
rad2:/home/mking# /usr/sbin/freeradius -X -A crash.log
Segmentation fault
rad2:/home/mking#
I don't believe running /usr/sbin/freeradius -X -A is capturing anything
useful. Is there something else I can do?
Here's the last
Try running the server in Debug mode
/path/to/freeradius -X -A from the command line, and ask that user to login.
It might give more info than just External Script Failed
-Original Message-
From:
[EMAIL PROTECTED]
g
[mailto:[EMAIL PROTECTED]
adius.org] On Behalf Of Jérémy
Just for some reference (Trying to find commonalities):
What OS/Distro are you?
I'm Debian testing release
How did you Install? (Prebuilt binary / created local package and install /
install from source)
I created a local Debian package, and installed it.
What modules did you enable?
-Original Message-
From:
adius.org] On Behalf Of Alan DeKok
Until we can get more information about what's happening
(strace/ktrace, or gdb backtrace), there isn't much anyone
can do to fix it.
How would I create those traces? (I'm looking for a suggested command
line, since
Is there a how-to or tutorial for this simple case? I have
searched this list and google generally. I have read the
articles referred to on the FreeRadius home page and several
others and I still can't see how the configuration works. Any
and all help gratefully received.
Steve.
To: FreeRadius users mailing list
Subject: RE: How do I set up simple AD integration?
-Original Message-
From:
[EMAIL PROTECTED]
ists.freer
adius.org
[mailto:freeradius-users-bounces+sburton=shepherd-construction
[EMAIL PROTECTED]
ts.freeradius.org]On Behalf Of King
Wed Apr 12 13:21:06 2006 : Error: TLS_accept:error in SSLv3 read
client cert
ificate A
Wed Apr 12 13:21:07 2006 : Info: rlm_eap_mschapv2: Issuing Challenge Wed
Apr 12 13:21:07 2006 : Auth: Login OK: [DOMAIN\\USERNAME] (from client
localhost port 0) Wed Apr 12 13:21:07 2006 : Auth: Login OK:
Yes.
It's called ntlm_auth
You need samba installed to use it, and join the freeradius computer to
the domain. (Yes, you can join Linux to an active directory domain)
-Original Message-
From:
[EMAIL PROTECTED]
g
[mailto:[EMAIL PROTECTED]
adius.org] On Behalf Of Philippe
-Original Message-
I can't seem to figure out how to get with_ntdomain_hack set
correctly.
I am trying to get peap going against active directory with winbind.
It works if I enter in the username and password from the
windows supplicant prompt, but when I set the supplicant
-
From:
[EMAIL PROTECTED]
ius.org
[mailto:[EMAIL PROTECTED]
.freeradius.org] On Behalf Of King, Michael
Sent: Wednesday, May 10, 2006 3:39 PM
To: FreeRadius users mailing list
Subject: RE: with_ntdomain_hack
-Original Message-
I can't seem to figure out how to get
-Original Message-
From:
[EMAIL PROTECTED]
g
[mailto:[EMAIL PROTECTED]
adius.org] On Behalf Of [EMAIL PROTECTED]
Sent: Wednesday, May 24, 2006 3:02 PM
To: freeradius-users@lists.freeradius.org
Subject: Using PEAP and WinXP
Hi,
I have a question regarding the setup for
We're going to be setting up a few new FreeRADIUS servers on virtual
hardware. The server admin is asking me what I need for specs.
(Virtually, they can allocate whatever I need)
It's about 200-500 simultaneous authentications. (This is my prediction
for the next 4 years, we're about 10 right
-Original Message-
From:
On Behalf Of Kartthik Raghunathan
A supplicant ie. win XP machine validates the identity and
logon credentials against active directory using
peap-mschapv2 randomly ie. every 30 mins or 60 mins. This
disturbs the wireless connectivity often and am
-Original Message-
On Behalf Of [EMAIL PROTECTED]
Users telnet the switch, therefore a clear-text password will be sent.
Just a completely left field question. Any particular reason you have
chosen not to enable SSH on that switch? It's in the IOS (Assuming you
have the correct IOS
I'm just confirming, As per the FAQ, there are no (Official) Redhat
RPM's at the moment.
The best way to install on Red Hat Enterprise Linux ES release 4
(Nahant) is to install from source?
I'm setting up a new server (and redhat is a new distro for me) and I'd
like to start off on the right
Can we bump this guy from the list now?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
On Behalf Of [EMAIL PROTECTED]
Sent: Thursday, August 10, 2006 11:00 PM
To: freeradius-users@lists.freeradius.org
Subject: Autoreply: Does Freeradius support IAPP (802.11f)??
Just checking to see if the list is up. The homepage was down for a
bit (~10 minutes) but the wiki is still not responding.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-Original Message-
King, Michael [EMAIL PROTECTED] wrote:
Just checking to see if the list is up. The homepage was
down for a
bit (~10 minutes) but the wiki is still not responding.
The list is hosted in the Netherlands, the Wiki in Texas,
and the main web site in Chicago
-Original Message-
Why? 1.1.3 just came out.
Indeed. Did I miss the announcement yesterday?
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
I'm building a new radius server. I'm copying an existing one.
I'm getting the following error from freeRADIUS when I run it -x
(FreeRADIUS 1.1.3)
Exec-Program: /usr/bin/ntlm_auth --request-nt-key --username=mking
--challenge=46b51a98d607a3a9 --nt-response=
hex decode of failed! (only got 0
Ok, I now have 1.1.3 working great.
However, my log files now have an extra (and repeated) error message
Thu Aug 24 16:50:33 2006 : Error: TLS_accept:error in SSLv3 read
client certificate A
Thu Aug 24 16:50:33 2006 : Error: rlm_eap: SSL error
error::lib(0):func(0):reason(0)
Thu Aug
Well Scott.
You've seemed to make everyone chime in on the lack of documentation on
the Internet for Linux as a whole (That's a summary of the 5 proceeding
messages)
But nobody answered your question. :-)
Scott, your looking at the wrong software product for what you do.
Well, FreeRADIUS
We're trying to build FreeRADIUS 1.1.3 into a RPM to install on our
RedHat ES 4.0 servers.
Following the directions in the Wiki
http://wiki.freeradius.org/index.php/FreeRADIUS_Wiki:FAQ#How_do_I_build_
a_RPM_package_from_sources.3F
I get the following error(s) and I've attached the referenced
-Original Message-
I saw this last week building 1.1.3 on RHEL 4.0 ES (Update 3) too.
Was fixed
by just applying the latest patches from Redhat. Appears to
be due to a mismatch between various software levels. With
the latest fixes, it is all OK.
Which patches? Just run
, 2006 6:14 AM
To: FreeRadius users mailing list
Subject: Re: Building Freeradius RPM on Redhat ES 4.0
On Wed, Aug 30, 2006 at 08:47:13AM +0100, B Thompson wrote:
On Tue, Aug 29, 2006 at 07:32:23PM -0400, King, Michael wrote:
cp: will not overwrite just-created
`/var/tmp/freeradius-root
Did you generate the certificates that are mentioned
there? The one's that ship with the server are expired, you have to
generate your owncertificate.
What version of FreeRADIUS. Version 1.1.1 fixed alot
of little PEAP things.
Version 1.1.3 of course is what you should be
running.
So we've had many thousands of succcessful AD/PEAP authentications.
Today, the thing just died. I shut the server off so that all the AP's
started using my backup server.
This is the logs that I have from when it happened. Unfortuanly,
everything seemed fine after I rebooted the server (my
-Original Message-
It looks like a memory corruption issue. Either there's a
bug in the server, or there's bad RAM in the system.
Any suggestions on how to test memory on a Debian box remotely?
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
24 hrs later, Different radius server. (on a different box, this one is
RedHat) FreeRadius 1.1.3
Same problem, throwing the same Error.
Tue Sep 5 13:24:33 2006 : Error: rlm_eap: SSL error
error::lib(0):func(0):reason(0)
Tue Sep 5 13:24:33 2006 : Error: TLS Alert write:fatal:bad
-Original Message-
3. debian source package builds on unstable without problem
here. And it provides a minimal intrusive way of enabling ssl
and postgres related stuff.
Just to follow up.
It appears that in FreeRadius 1.1.3, if you follow the directions in the
WIKI
mailing list
Subject: Re: Failed Logins
King, Michael [EMAIL PROTECTED] wrote:
24 hrs later, Different radius server. (on a different box,
this one
is
RedHat) FreeRadius 1.1.3
Same problem, throwing the same Error.
This may be related:
https://www.aet.tu-cottbus.de
So, I've rolled back to my freeRADIUS 1.0.4 server, cause it hasn't
crashed like my 1.1.3 has been doing.
I got this today in it's debug logs. Is there a config option to
increase the number of threads? Is there a better way to fix that?
Wed Sep 6 13:08:22 2006 : Auth: Login OK:
-Original Message-
See thread pool in radiusd.conf.
It looks like your DB is slow...
Entirely possible. It is Active Directory (Via the ntlm_auth program)
so I have no control over it. :-(
So, I've rolled back to my freeRADIUS 1.0.4 server, cause it hasn't
crashed
Paul,
I think what Alan was getting at is that Your client asked for EAP-TTLS,
not EAP-MSChapV2. This might be the root of your problem.
If you Intend to do MSChapV2 inside of TTLS Tunnels, you MUST setup a
certificate. This is make quite clear in the eap.conf file, that TTLS
is dependant on
-Original Message-
No, actually you cant. I disabled new user creation as a all the spam
bots appeared to be smart enough to create new users then use them for
spamming.
Peter,
MediaWiki has a captcha extension to prevent this problem.
Alan,
What domain were you testing against? 2000 or 2003? (I ask, because I
was under the impression that KRB5 had to be setup as well)
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
On Behalf Of Alan DeKok
Sent: Friday, September 22, 2006 3:26 PM
To: FreeRadius
-Original Message-
Try: http://www.striker.ottawa.on.ca/~aland/vista.patch
You'll have to re-build re-install the EAP module (you don't need to
touch the rest of the server). It won't help, but it will print out a
little more information. We'll probably have to do a few cycles
Things didn't work so hot. :-( Seg Fault
I created the vista.patch file by pasting the file you referenced into a
vi session.
I moved it into freeradius-1.1.3
I used the command:
patch -p0 vista.patch
Which gave me a success. (Well two of them for each file)
I recreated my .deb file and
Just to double check that I didn't cut paste wrong,
I wget'd the file from your server, repatched, recompiled, and
reinstalled.
Same seg fault, at same place.
rlm_eap_tls: Start returned 1
VISTA[eap_compose:475]: reply-id 6
VISTA[eap_compose:476]: reply-code 1
VISTA[eap_compose:514]:
Just reading thru the deployingradius.com pages
On page:
http://deployingradius.com/documents/configuration/active_directory.html
You reference the krb5.conf file like this:
[realms]
...
realm.company.com = {
kdc = nt-server-hostname.company.com
}
...
However, someone on the list
Still a 404
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
On Behalf Of Alan DeKok
Sent: Thursday, October 05, 2006 3:59 PM
To: FreeRadius users mailing list
Subject: Re: FreeRADIUS user Survey
Guilherme Franco [EMAIL PROTECTED] wrote:
Survey Not Found
Not to rude, have you had a chance to poke that Patch again?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
On Behalf Of Alan DeKok
Sent: Wednesday, October 04, 2006 6:54 PM
To: FreeRadius users mailing list
Subject: Re: Windows Vista doing PEAP
King, Michael
-Original Message-
I would say 1.1.3 is fine to use. 2.0 will be out in a few months, so
you're free to upgrade then, too.
I think question he was trying to get across, is 2.0 going to be
significantly different from 1.1.3 from a config standpoint.
-
List
doing PEAP
King, Michael [EMAIL PROTECTED] wrote:
Not to rude, have you had a chance to poke that Patch again?
Reload it from the same URL as last time.
If it still crashes, see doc/bugs. I don't see how it can crash at
all, so the crash looks like a symptom of another issue.
Alan DeKok
PROTECTED]
On Behalf Of K. Hoercher
Sent: Wednesday, October 11, 2006 2:06 AM
To: FreeRadius users mailing list
Subject: Re: Windows Vista doing PEAP
Hi
On 10/10/06, King, Michael [EMAIL PROTECTED] wrote:
I'm assuming it built it that way.
Anways, here's what I got following those direcitons (Which
list
Subject: Re: Windows Vista doing PEAP
Hi
On 10/10/06, King, Michael [EMAIL PROTECTED] wrote:
I'm assuming it built it that way.
Anways, here's what I got following those direcitons (Which is what
leads me to think the symbols go stripped)
If you look at or around line 188, there should
Alan, here is your requested capture.
This was with RC1
I will be reattempting with RC2 in a little bit.
rad2:~# gdb /usr/sbin/freeradius
GNU gdb 6.4.90-debian
Copyright (C) 2006 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
I posted this to the list back in September, but was unable to chase it
then.
http://www.mail-archive.com/freeradius-users@lists.freeradius.org/msg294
52.html
I think it's load related.
I found this on the net:
http://www.mail-archive.com/modssl-users@modssl.org/msg16180.html
There is
-Original Message-
Are you sure you're using the new code? It looks to me like it's NOT
installing the server with symbols, and it's NOT printing the new
debugging messages.
I was, I just wasn't building the server right. I figured it out a few
hours later (See my later emails)
Weird..
I just got this email this morning...
SecureW2 is no longer at www.securew2.org
Please visit
http://securew2.alfa-ariss.com
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
On Behalf Of Alessandro Agostini
Sent: Thursday, October 12, 2006 9:53 AM
To:
I posted this to the list back in September, but was unable to chase it
then.
http://www.mail-archive.com/freeradius-users@lists.freeradius.org/msg294
52.html
But it has returned with a vengeance. It only seems to affect the 1.1.3
server. I have not tried any other versions, other than the
Just following up, anyone got a suggestion.
I've still got the server locked up in a state where it throws this
error message at will.
Mike
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
On Behalf Of King, Michael
Sent: Friday, October 13, 2006 9:34 AM
I got the same results as below with RC2.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of King, Michael
Sent: Wednesday, October 11, 2006 1:56 PM
To: FreeRadius users mailing list
Subject: RE: Windows Vista doing PEAP
Alan, here is your requested
Since I've been
having great amounts of troubles with 1.1.2 / 1.1.3, (See SSL_read failed in a
system call message) We're going to try building another server with 1.0.4 (The
latest version that we have in production that works for us)
Anyone know of a
stress test utility that can simulate
To: FreeRadius users mailing list
Subject: Re: SSL_read failed in a system call
King, Michael [EMAIL PROTECTED] wrote:
I've still got the server locked up in a state where it throws this
error message at will.
The issues is bad record mac, not failed in system call. The
second error message is a result
not handle the load of
around 500 clients?
I also complied 1.0.4 on one of the newer servers, it appeared to run
without any difficulties as well.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
On Behalf Of King, Michael
Sent: Wednesday, October 18, 2006 5:47 PM
Here we are: I did it twice.
Funny it sent an access reject the second time.
rad2:/home/mking# /usr/sbin/freeradius -x
Starting - reading configuration files ...
Using deprecated naslist file. Support for this will go away soon.
Module: Loaded exec
rlm_exec: Wait=yes but no output defined.
1 - 100 of 150 matches
Mail list logo
