Hello, does anyone know what is the difference
between CHAP-Password and PAP-Password?
Because if i use CHAP working fine and if i use
PAP rejects me.
Thanks,
Kyriaki Gali,IT Applications
SpecialistKinetix Tele.com Support Center,Tel Fax: +30 2310
256140GSM: +30 6947 723737http
Hello,
I change it already but it keeps reject
me...
pap
{#
encryption_scheme
=crypt
encryption_scheme = clear
}
I don't know what else must change...
Your PAP works with this change?
Kyriaki Gali,IT Applications SpecialistKinetix Tele.com Support
Center,Tel Fax: +30 2310
Hello,
For accounting_stop packet it's better to use Acct-Session-Time because for
a call that the same user do you can use this to seperate the calls. In this
way you can handle a lot of calls that one user do. All this if you want to
know about the calls one by one.
Kyriaki Gali
(seconds) etc.
This table updated (in sql.conf) when an accounting_start and an
acconting_stop packet comes.
You get the AcctSessionTime(seconds) and calculate the credits(money). You
must have in mind charge_step, minimum_charge etc.
Regards,
Kyriaki Gali,
IT Applications Specialist
Kinetix
in radacct table inserts an AcctStartTime and an AcctStopTime, when execute
an accounting_start and an accounting_stop packet. You can use these.
Kyriaki Gali,
IT Applications Specialist
Kinetix Tele.com Support Center,
Tel Fax: +30 2310 256140
GSM: +30 6947 723737
http://www.kinetix.gr
e-mail
You can use sql (you find it in radius.conf)
There is a table radacct that includes AcctStartTime - AcctStopTime,
Nas-IP-Address etc. for accounting packets.
See if this table has anything that you need and use it.
Regards,
Kyriaki Gali,
IT Applications Specialist
Kinetix Tele.com Support
for example if you have a word and a
digit you write this \w\d
and when you want to get it you put $ not %.
Kyriaki Gali,
IT Applications Specialist
Kinetix Tele.com Support Center,
Tel Fax: +30 2310 256140
GSM: +30 6947 723737
http://www.kinetix.gr
e-mail: [EMAIL PROTECTED]
- Original Message
yes i think it will work. see sql.conf if you can do something like that. i
don't think to have any problem
if i'll try it i'll tell you.
Kyriaki Gali,
IT Applications Specialist
Kinetix Tele.com Support Center,
Tel Fax: +30 2310 256140
GSM: +30 6947 723737
http://www.kinetix.gr
e-mail: [EMAIL
This is a problem i don't know if there is a way to fix this but
I suggest in radacct table to insert a field to get the disconnect cause, so
if you haven't AcctStopTime you will know why. Or check for how long your
cdr is without an AcctStopTime.
Kyriaki Gali,
IT Applications Specialist
yes i know it is a problem and i don't know if we can do something else. I
have the same problem also
so if you find anything please let me know.
regards,
Kyriaki Gali,
IT Applications Specialist
Kinetix Tele.com Support Center,
Tel Fax: +30 2310 256140
GSM: +30 6947 723737
http
if you want to print 2 or more messages you must to put a comma..
for example
print Session-Timeout=111,Framed-Route=tests;
Kyriaki Gali,
IT Applications Specialist
Kinetix Tele.com Support Center,
Tel Fax: +30 2310 256140
GSM: +30 6947 723737
http://www.kinetix.gr
e-mail: [EMAIL PROTECTED
Hi all,
do you know where can i change the default messages that
radius send me?
For example rejects a user (Simultaneous-Use := 1) and send me
this message
Reply-Message := "\r\nYou are already logged in - access
denied\r\n\n"
I want to include more lines... can i?
Ky
Thanks , i changed and it works fine!
Kyriaki Gali,IT Applications SpecialistKinetix
Tele.com Support Center,Tel Fax: +30 2310 256140GSM: +30 6947
723737http://www.kinetix.gre-mail:
[EMAIL PROTECTED]
Title: Vendor-Specific declare in sql
If you use sql you must insert this attribute in
radius's tables.
Kyriaki Gali,IT Applications SpecialistKinetix Tele.com Support
Center,Tel Fax: +30 2310 256140GSM: +30 6947 723737http://www.kinetix.gre-mail: [EMAIL PROTECTED]
- Original
ok!
Kyriaki Gali,IT Applications SpecialistKinetix Tele.com Support
Center,Tel Fax: +30 2310 256140GSM: +30 6947 723737http://www.kinetix.gre-mail: [EMAIL PROTECTED]
- Original Message -
From:
EROS
To: [EMAIL PROTECTED]
Sent: Thursday, October 07, 2004 11:58
PM
Hello,
does anyone knows how can i change the Reply-Message that i
get with another RAD_REPLY when the user is rejected because
Simultaneous-Use = 1?
thanks.
Kyriaki Gali,IT Applications SpecialistKinetix
Tele.com Support Center,Tel Fax: +30 2310 256140GSM: +30 6947
723737http
Exec-Program-Wait : wait to finish authorization and then executed
Kyriaki Gali,
IT Applications Specialist
Kinetix Tele.com Support Center,
Tel Fax: +30 2310 256140
GSM: +30 6947 723737
http://www.kinetix.gr
e-mail: [EMAIL PROTECTED]
- Original Message -
From: Edgars [EMAIL PROTECTED
enied\r\n\n"
how must beSimultaneous-Use in my table to check
groups?
Kyriaki Gali,IT Applications SpecialistKinetix
Tele.com Support Center,Tel Fax: +30 2310 256140GSM: +30 6947
723737http://www.kinetix.gre-mail:
[EMAIL PROTECTED]
Sorry, guys i found it.. thanks.
Kyriaki Gali,IT Applications SpecialistKinetix
Tele.com Support Center,Tel Fax: +30 2310 256140GSM: +30 6947
723737http://www.kinetix.gre-mail:
[EMAIL PROTECTED]
? and after that i see that in the previous line had
inserted AcctStopTime(the time that i send the second auth packet) though i
don't send a stop_packet!
Kyriaki Gali,IT Applications SpecialistKinetix
Tele.com Support Center,Tel Fax: +30 2310 256140GSM: +30 6947
723737http://www.kinetix.gre
cct"perl: func_checksimul =
"checksimul"perl: func_detach = "detach"perl: func_xlat =
"xlat"perl: perl_flags = "(null)"perl: func_start_accounting
= "accounting"perl: func_stop_accounting =
"stop_accounting"
for example what is the d
I want to know if freeradius v 1.0.0 need some millisecond to send an access-
accept message by default.
I have a script that needs only 67 ms and when i run it in Radius client
test , i see that do more than 500ms to send me an access-accept message! Does
anyone know if needs some ms to send
ok i have solve my problem with rlm_perl.
Does anyone know how can i get enviroment variables in example.pl
Before i use rlm_pel i get that like this
$username = $ENV{USER_NAME};
Now what can i do to get $username from the accounting_stop packet?
Kyriaki Gali,
IT Applications Specialist
I want to know if freeradius v 1.0.0 need some millisecond to
send an access-accept message by default.
I have a script that needs only 67 ms and when i run it
in Radius client test , i see that do more than 500ms to send me an
access-accept message! Does anyone know if needs some ms to
You must have in your nas table the nas-user (IP,type etc) and in
clients.conf you must have it like this
client 194.219.120.83 {
secret = ugabuga
shortname = GNUGK
nastype = cisco
}
the radiusd.conf need to include the client.conf
Kyriaki Gali,
IT Applications
25 matches
Mail list logo