On 08.08.2013 19:16, Shaw, Colin M. wrote:
[peap] Using saved attributes from the original Access-Accept
User-Name = testx
[peap] Saving response in the cache
Your inner-tunnel virtual server returns only User-Name attribute in
Access-Accept. Configure your inner-tunnel virtual
You could move files above eap but IMO it's better (cleaner, more
obvious) to run this in post-auth like so:
authorize {
...
eap {
ok = return
}
...
}
post-auth {
...
files
...
}
Note that you'll need to set the postauth_usersfile on your files
Thank
Hi,
I'm in the process of attempting to move our 802.1x services off of an aging
freeRADIUS (v1) server onto a newly built server running freeRADIUS v2.2
Tests so far with wireless clients using 802.1x PEAP/MS-CHAPv2 are working ok.
Clients can authenticate (against AD) and be assigned the
On 08/08/13 11:07, Shaw, Colin M. wrote:
difference. Lastly, for testing purposes, if I insert the required
attributes into the default post-auth then it all works and the wired
client is assigned the correct vlan, so again the switch side must be ok
and I also therefore presume all the
On 08/08/13 16:16, Shaw, Colin M. wrote:
Thanks for the reply Phil.
difference. Lastly, for testing purposes, if I insert the required
attributes into the default post-auth then it all works and the wired
client is assigned the correct vlan, so again the switch side must be
ok and I also
5 matches
Mail list logo