Hi!
I trying to set up freeradius not in the "stadnard directory" I would like to
have it installed in the directory specifiedby hand for instance
/home/radius/freeradius
so I run configure in such a way:
./configure --prefix=/home/radius/freeradius
--with-logdir=/home/radius/freeradius/log
--
Hi!
I am trying to use freeradius as an authentication server for sip express
router. I am o newbee with free radius so a kindly ask for your help.
I configured ser so it sends the requests messages to radius but I encountered
a strange error:
Both are running on the same machine so it is enou
Hi!
I am trying to set the destination file for detail log file in the detail file
module in the following way
detailfile = ${radacctdir}/%{check:Huntgroup-Name}/detail-%Y%m
but radius instead allways writes to the following destination??
rlm_detail: %A/%{Client-IP-Address}/detail expands to
/va
Hi!
I am using radius to authenticate request from the radiusclient-ng2 with the
digest method.
I have a strange situation because client log the following problem:
"received invalid reply digest from RADIUS server"
This is strange because as I read on web this error is due to wrong secrets
con
nx mmxext fxsr_opt lm 3dnowext 3dnow pni lahf_lm
cmp_legacy
bogomips: 5027.24
TLB size: 1024 4K pages
clflush size: 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp
> tzieleniewski wrote:
> > I am using
Peter Nixon napisał(a):
On Mon 29 Jan 2007 17:22, Alan DeKok wrote:
tzieleniewski wrote:
I am using radius to authenticate request from the radiusclient-ng2 with
the digest method. I have a strange situation because client log the
following problem: "rec
Hi!
I am using mysql module as the authorization module and I get the following
warning:
!!!
!!!Replacing User-Password in config items with Cleartext-Password. !!!
Alan DeKok napisał(a):
tzieleniewski wrote:
I am using mysql module as the authorization module and I get the following warning:
!!!
!!!Replacing User-Password in config items with Cleartext-Password
Hi!
My first question is if the dialup_admin is still supported and compatible with
latest free radius:)?
because right now I am trying to use it with my latest free radius cvs version.
If it is still compatible please help me with the following issues:
Is it possible to control the radcheck tab
> tzieleniewski wrote:
>
> >Hi!
> >
> >My first question is if the dialup_admin is still supported and compatible
> >with latest free radius:)?
> >because right now I am trying to use it with my latest free radius cvs
> >version.
> >
> >
Hi!!
I am trying to utilize the counter module.
I tried to do everything as it is written in the comments from the radiusd.conf
file.
unfortunately I still have some problem to make it work and fully understand.
I ask for your assistance and small explanation.
As I understood the counter module
Hi!!
Ive installed the latest cvs version of dialup_admin and whenever I edit the
parameters of a user or a group after commiting the change they appear in the
radreply and radgroupreply tables.
For instance I see the following sql insert query:
Query: INSERT INTO radgroupreply (groupname,attrib
Hi!
I am trying to use radius as the accounting server for Sip proxy.
After i send the Accounting request to radius the radius server brokes down and
informs about memory segmentation fault. Please point me what could be the
reason for this.
Here is the radius debug output:
rad_recv: Accounting
[EMAIL PROTECTED]:~/freeradius/raddb$ radiusd -v
radiusd: FreeRADIUS Version 2.0.0-pre0, for host x86_64-unknown-linux-gnu,
built on Jan 29 2007 at 13:36:2
> tzieleniewski wrote:
> ...
> > modcall: entering group preacct for request 1
> > Naruszenie ochrony pamięci (tra
Hi!!
I was setting up the sqlcounter module and I needed to set the group parameter
in
the radgroupcheck table in order to set the limit values for sqlcounter. I
found out
that sql module doesn't work correctly. I set the read_groups parameter in the
sql.conf file to 'yes' and despite that the s
Hi!
I have just compiled the latest CVS and whenever I try to start radius I get
the following info:
Configuration file /home/radius/freeradius/raddb/radiusd.conf is globally
readable.
This is because I use the symbolic links to files. Can this restriction be
somehow removed??
Bests
-tomasz
Hi!
I am trying to process Accounting request to radius but I get the following
error from sql module:
rlm_sql (sql): Unsupported Acct-Status-Type = 15
I have added the $INCLUDE dictionary.ser line to the dictionary file and the
dictionary.ser file contains the following records:
VALUE Acct-Sta
Alan DeKok napisał(a):
tzieleniewski wrote:
I am trying to use radius as the accounting server for Sip proxy.
After i send the Accounting request to radius the radius server brokes down and informs about memory segmentation fault. Please point me what could be the reason for this
Alan DeKok napisał(a):
tzieleniewski wrote:
I am trying to use radius as the accounting server for Sip proxy.
After i send the Accounting request to radius the radius server brokes down and informs about memory segmentation fault. Please point me what could be the reason for this
Alan DeKok napisał(a):
tzieleniewski wrote:
I am trying to use radius as the accounting server for Sip proxy.
After i send the Accounting request to radius the radius server brokes down and informs about memory segmentation fault. Please point me what could be the reason for this
Hi!!
I compiled the latest cvs version of freeradius and installed it as always.
When I tried to run it by radiusd -X to check if everything was ok I got the
following error which probably considered counter module (is it error or I
missed something?):
Module: Instantiated exec (exec)
Module:
Hi!!
I was trying to find out what is this table nas really used for.
I read the whole documentation in the doc directory of radius and dialup_admin
but I still have many doubts.
Is it used just for mapping and getting information about online users or it is
somehow equivalent to clients.conf fi
Gaddis, Jeremy L. napisał(a):
On Fri, 9 Feb 2007, tzieleniewski wrote:
I was trying to find out what is this table nas really used for.
I read the whole documentation in the doc directory of radius and dialup_admin but I still have many doubts.
Is it used just for mapping and
wrote:
> >
> > On Fri, 9 Feb 2007, TZieleniewski wrote:
> >> so clients.conf can be empty and all settings can be contained in nas
> >> table?
> >
>
> Is there some spot where we can get definitions for each column (like where
> each definition maps to
Yes I checked it.
You may comment it out from the radiusd.conf file.
> Is there anything I have to config so it doesn't touch the config files? How
> do I move the server onto pure SQL for the NAS list? Can the clients.conf
> file be totally empty?
>
>
> tzieleniewski
n't touch the config files? How
> > do I move the server onto pure SQL for the NAS list? Can the clients.conf
> > file be totally empty?
> >
> >
> > tzieleniewski wrote:
> > >
> > > What I managed to figure out is that nasname is a source
Hi!!
I'd like to ask You If it is possible to set up radius in such way that
whenever there will be an Access Request send from the NAS for a user which in
a member of the particular group in database the reply will be attached with
the reply parameter of thed value equal to the User-Name param
Hi!
I am using the latest cvs version of freeradius.
Does this version support the read_group parameter?
In the conf file there is written that setting it to yes causes to read the
group table.
>From my observation freeradius works like this:
1 - checks records from radcheck
2 - if they match, a
Hi!
Is it possible to implement such functionality with the usage of attr_rewrite
module that whenever a packet arives to freeradius module will check if
particular parameter exists in a request and if it doesn't, it will try to
create it from other set of packet parameters? Maybe it can be do
Hi !
I tried to install the latest cvs version of freeradius, I did
make clean
./configure
make - and here I got the following error:
conffile.c:902: error: conflicting types for 'cf_section_parse'
/home/radius/src/radiusd/src/freeradius-devel/conffile.h:56: error: previous
declaration of 'cf_se
Dariusz Dwornikowski napisał(a):
Hi,
I am using freeradius 1.0.2 on debian and i want to integrate it
with openser.
What is my question is how to use my own sql queries in authentication
and authorization. I do not want/I can't use the database schema
provided with freeradius.
-
Hi!
How can I configure radius to always check the group table for a user without
utilizing the Fall-Through parameter in the radreply table for a particular
user??
I tried to use read_groups=yes in the sql.conf but it didn't help.
Thanks in advanced
-tomasz
-
List info/subscribe/unsubscrib
Hi,
How can I force the group processing after the positive authentication with the
radcheck table. I want to achieve the following: after I authenticate the user
I would like to add a reply attribute if the user belongs to the particular
group.
Thank you in advance.
Tomasz
-
List info/subsc
Hi,
I have just downloaded the CVS trunk sources.
When I compile them I get the following errors:
Please point me what do I miss.
Making all in main...
make[4]: Entering the directory `/home/radius/src/radiusd/src/main'
/home/radius/src/radiusd/libtool --mode=link gcc -export-dynamic -dlopen se
34 matches
Mail list logo