nikitha george wrote:
> But one more issue i am facing is when i try to connect 3 clients per
> second for 30 minutes with freeradius-1.1.6 only 200 or 250 clients are
> getting connected ( means 67 to 83 seconds the authentication happened)
> after that the clients are not getting connected, not s
Hi Alan,
I have not enabled full debugging with -X option. But syslog was enabled,
all the logs were redirected to a remote syslog server. You want me to test
with all the debugging including syslog turned off?
Thanks,
Nikitha
On 5/18/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
Hi,
> If
Hi,
> If I connect 2 clients per second then all the clients ( 2 per second for
> 30 minutes ) are getting connected.
>
> Please let me know what could be the reason for this? The log file is very
> huge.. if you could not figure out the issue with the above statistic it
> will send the log to
No. I am using local database.
On 4/27/07, inverse <[EMAIL PROTECTED]> wrote:
> I am using freeradius-1.1.4 with PEAP-MSCHAPV2. Each session starting
from
> Access-Request till Access-Accept it takes more than 250ms to complete.
Is
are you doing it against an LDAP server?
-
List info/subscribe
Hi Alan,
I regret for the late reply.
Yes. I am running the server in single threaded mode. Will it be an overhead
for taking more time?
I verified the same by running in different high speed machine. It looks
pretty okay. It took arround 150ms. So i am okay with this performance.
But one more i
nikitha george wrote:
> I am using freeradius-1.1.4 with PEAP-MSCHAPV2. Each session starting
> from Access-Request till Access-Accept it takes more than 250ms to
> complete. Is it the normal performance of freeradius-1.1.4 or anything
> suspicious in this regard?
It depends on your CPU speed, e
> I am using freeradius-1.1.4 with PEAP-MSCHAPV2. Each session starting from
> Access-Request till Access-Accept it takes more than 250ms to complete. Is
are you doing it against an LDAP server?
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hi All,
I am using freeradius-1.1.4 with PEAP-MSCHAPV2. Each session starting from
Access-Request till Access-Accept it takes more than 250ms to complete. Is
it the normal performance of freeradius-1.1.4 or anything suspicious in this
regard? When i try to send many Request simultaneously then t
8 matches
Mail list logo