The address for me is: 69.174.57.101
On Tue, Aug 11, 2009 at 1:20 AM, Godson Gera godso...@gmail.com wrote:
Ok here is the address 69.174.57.101 . Most of the time I use OpenDNS for
name resolution. But the problem is still there even if I use my ISP's DNS
(mostly because its resolving to
Hello,
I found in WIKI list of supported commands
http://wiki.freeswitch.org/wiki/Mod_commands.
I need command answer but it doesn't exist (Freeswitch 1.04, Win32)
That's what Freeswitch replies for this command:
answer: Command not found!
Сould you please help?
Regards,
Maxim Tsvetov
Thanks Brian,
Well spotted with the domain/cidr :)
I changed the line param name=apply-inbound-acl value=domains/ in
the internal.xml with a new value, and changed the list to match but I
still get the same 'Rejected by acl domains' error.
And yes I reloaded the xml. :)
Kevin
Brian West
Maxim Tsvetov pisze:
Hello,
I found in WIKI list of supported commands
http://wiki.freeswitch.org/wiki/Mod_commands.
I need command answer but it doesn't exist (Freeswitch 1.04, Win32)
That's what Freeswitch replies for this command:
answer: Command not found!
Сould you please
Thanks for your replay.
I've tried that. But it says following error message.
2009-08-11 14:23:09 [ERR] mod_perl.c:69 Perl_safe_eval() [require
'/usr/local/freeswitch/conf/test.pl';]
Undefined subroutine freeswitch::DTMF called at
/usr/local/freeswitch/conf/test.pl line 6.Compilation failed in
I'll retst it later today and give you a link with instructions
Am 10.08.2009 um 20:14 schrieb vmorales:
By ./compile I was referring to ./configure
Vladimir
-Original Message-
From: vmorales [mailto:email.list.subscri...@gmail.com]
Sent: Monday, August 10, 2009 11:49 AM
To:
Thank you.
Is it possible to use this command from command line or via event_socket
interface?
Szymon Olko wrote:
Maxim Tsvetov pisze:
Hello,
I found in WIKI list of supported commands
http://wiki.freeswitch.org/wiki/Mod_commands.
I need command answer but it doesn't exist
I've taken a look at phrase_es.xml and would like other spanish native
speakers to check the following (i preferred to write down here my
impressions so others can contribute instead of sending a patch):
1) Centavos
prompt phrase=Centavos por minuto filename=cents-per-minute.wav/
prompt
Maybe the best solution is make two spanish translation.
One for american y one for España.
I'm italian but i know this little differences beacouse i live in Colombia and
i have studied in Spain.
Maybe i can help with italian prompts but i don't understand how.
BR
sendmsg
call-command: execute
execute-app-name: answer\n\n
the example is in this wiki page:
http://wiki.freeswitch.org/wiki/Event_socket_outbound
http://wiki.freeswitch.org/wiki/Event_socket_outbound
2009/8/11 Maxim Tsvetov maxim.tsve...@gmail.com
Thank you.
Is it possible to use this
We've been using mycaption for a number of months and have been very
happy with the results. I'd suggest giving them a try.
Darren Wiebe
dar...@aleph-com.net
Pete Mueller wrote:
I apologize, I should have been more clear. We will be using humans
to scan the translated results. But we are
why not use:
session:answer()
2009/8/11 Maxim Tsvetov maxim.tsve...@gmail.com
Thank you.
Is it possible to use this command from command line or via event_socket
interface?
Szymon Olko wrote:
Maxim Tsvetov pisze:
Hello,
I found in WIKI list of supported commands
I've tried all this command from FS console
and all of them return Unknown command.
Milena-6 wrote:
sendmsg
call-command: execute
execute-app-name: answer\n\n
the example is in this wiki page:
http://wiki.freeswitch.org/wiki/Event_socket_outbound
I've tried all this command from FS console
and all of them return Unknown command
daqiang wang wrote:
why not use:
session:answer()
2009/8/11 Maxim Tsvetov maxim.tsve...@gmail.com
Thank you.
Is it possible to use this command from command line or via event_socket
Hi Pete,
I'm afraid that the answer's still the same: use a human. Here's an
article describing the state of the art:
http://www.theregister.co.uk/2009/08/05/spinvox_demo_day/
- the links to previous stories at the bottom provide good background.
--Dave
I apologize, I should have been more
answer only works on outbound event socket. why you don't answer in a
dialplan? what's scenario you use this?
On Aug 11, 2009, at 9:31 PM, Maxim Tsvetov wrote:
I've tried all this command from FS console
and all of them return Unknown command
daqiang wang wrote:
why not use:
you can send the answer on the console too;this is *how to* use
*sendmsg*from the console:
http://wiki.freeswitch.org/wiki/Event_Socket#sendmsg
http://wiki.freeswitch.org/wiki/Event_Socket#sendmsgbtw, the previous
command i gave you works just fine on event socket, it will work for you if
you
Its not an api command the docs are wrong and should be fixed.
/b
On Aug 11, 2009, at 8:31 AM, Maxim Tsvetov wrote:
I've tried all this command from FS console
and all of them return Unknown command
___
FreeSWITCH-users mailing list
It occurred to me that I better check that this still occurs using lua
and that this is not a mod_manged issue.
The lua script:
session:answer();
session:execute(set, bypass_media_after_bridge=true);
session:execute(bridge, loopback/6095553828/default);
does produce the same issue. The bridge
Hello Brian,
I wanna fix the wiki, but to make sure i got it right, does it only work on
outbound event socket? or is there any other scenario where it would work.
Thank you.
2009/8/11 Brian West br...@freeswitch.org
Its not an api command the docs are wrong and should be fixed.
/b
On
Would truly appreciate that.
Thanks Michal!
-Original Message-
From: freeswitch-users-boun...@lists.freeswitch.org
[mailto:freeswitch-users-boun...@lists.freeswitch.org] On Behalf Of
Michal Bielicki
Sent: Tuesday, August 11, 2009 5:33 AM
To: freeswitch-users@lists.freeswitch.org
I'm still interested in getting pocketsphinx to attempt speech recognition
on an audio file.
To be honest, most of the problem is that at 8Khz (mobile phone call rate),
speech detection is NOT very accurate, at 16Khz it IS significantly better.
I'm planning to have a play with the speechtools
Replying again asking for help on the same thing over and over won't
get you far on this list. It'll usually get you ignored. Can you
explain what you're trying to do better? Why are you needing an
alarm? what purpose?
/b
On Aug 10, 2009, at 11:29 PM, velusamy velu wrote:
Dear
I'm also for different spanish localization if it's not too complicated. It
was also for me the first time I see signo de número for pound ;)
Samuel.
2009/8/11 Nicolas Brenner nico...@medularis.com
I think bakko is right, I have a few observations about the changes
proposed by samuel, and I
This can all be accomplished with standard bridge lines stacked one on
top of the other with continue_on_fail set to the list of codes you
wish to fail over with. You would also want to set
hangup_after_bridge=true. Loopback should NEVER be used in this case.
On Tue, Aug 11, 2009 at 2:16 AM, Peter Olsson
peter.ols...@visionutveckling.se wrote:
Hi, I'm trying to evaluate the OpenZAP/Sangoma-support in Windows, using
PRI E1 connections.
Thanks for testing this :-)
I have been meaning to install FreeSWITCH on Windows but just could not find
the
Hi all,
I have some suggested code to support currency and number pronounced in spanish,
http://jira.freeswitch.org/browse/MODAPP-317?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel
Diego
http://lacarretade.blogspot.com
--- On Tue, 8/11/09, Nicolas Brenner
Can you use this method to make simultaneous calls though while
preserving carrier order? i.e. each call must try carrier 1 first then
carrier 2 (because each carrier terminates a different subset of
numbers)
So - if I did NOT want to support failover I would use:
session:execute(bridge,
I am sorry for the ignorance on the matter, but how does google voice does?
Do they also have humans?
jmesquita
On Tue, Aug 11, 2009 at 11:17 AM, Kirk Bateman kirk.bate...@gmail.comwrote:
I'm still interested in getting pocketsphinx to attempt speech recognition
on an audio file.
To be
On Tue, Aug 11, 2009 at 2:38 AM, Kevin Golding ke...@kgolding.co.uk wrote:
Thanks Brian,
Well spotted with the domain/cidr :)
I changed the line param name=apply-inbound-acl value=domains/ in
the internal.xml with a new value, and changed the list to match but I
still get the same
I've tried to do this a couple of ways in the past but can't quite seem to
get it right. The scenario is this:
attorney at extension 326 with 2 phones
secretary at extension 327 with 1 phone and a blf that monitors 326
Initially I was simply adding the attorney's extension to the secretary's
On Tue, Aug 11, 2009 at 9:05 AM, Milena testeado...@gmail.com wrote:
Hello Brian,
I wanna fix the wiki, but to make sure i got it right, does it only work on
outbound event socket? or is there any other scenario where it would work.
FYI, Diego Viola fixed the wiki. (Thanks Diego!)
-MC
On Tue, Aug 11, 2009 at 9:38 AM, Michael Jerris m...@jerris.com wrote:
Correct me if I am wrong, but can't all these differences be done in a
different soundset without modifying any code or other config?
Particularly the changes in discussion only refer to different ways to say
things.
you have to now apply the ACL correctly to the sofia profile.
/b
On Aug 11, 2009, at 2:38 AM, Kevin Golding wrote:
Thanks Brian,
Well spotted with the domain/cidr :)
I changed the line param name=apply-inbound-acl value=domains/
in
the internal.xml with a new value, and changed the
Michael, you're welcome :).
Milena, answer is a mod_dptools command, you can use it from the XML
dialplan or from the event socket outbound. mod_commands API are APIs that
you execute from the socket, event socket inbound, etc. But you can also
execute them from event socket outbound using the
I suggest that you learn the differences between mod_commands commands and
mod_dptools applications, and also the interfaces where you can access and
use them.
As said before, mod_dptools is accessible from dialplan, event socket
outbound, etc. and mod_commands is accessible from the CLI, event
On Tue, Aug 11, 2009 at 1:10 PM, Diego Viola diego.vi...@gmail.com wrote:
Michael, you're welcome :).
Milena, answer is a mod_dptools command, you can use it from the XML
dialplan or from the event socket outbound. mod_commands API are APIs that
you execute from the socket, event socket
This is an integral part of my application. I need to have FreeSWITCH
outside of the media path as well as be able to do multiple bridges for the
same A leg.
/*WORKS*/
action application=set data=hangup_after_bridge=false/
action application=bridge
data=sofia/gateway/${mygateway}/1${client_one}/
Hi Michael,
Thanks for trying to help with this.
action application=set data=continue_on_fail=true/
action application=bridge
data=sofia/gateway/broadvox/6095553828,sofia/gateway/broadvox/7325553828/
!-- if either of the above dialstrings is successful then this next line
won't execute...
Hi there,
I the 'does not work' example your media stream is back up at the
carrier as the called party hangs up.
You would have to cause another SIP REINVITE and re capture the media.
See http://wiki.freeswitch.org/wiki/Bypass_Media and the How to
disable/enable it on the fly? section as a
The patch submitted by Diego Toro, however would fix the actual
pronunciation of currency and dates from 20th - 29th which are not working
with the english implementation of mod_say_es.c
In regards the dates pronunciation for voicemail for example we used the
following changes to mod_say_es.c
Hello,
Good work guys. I am having good fun using freeswitch so far. Currently, I
am having a serious issue on making a call transfer happen. The scenario is
simple.
1. Caller A arrives on extension 1 and is waiting on a fifo queue.
2. Caller B arrives on extension 2 and dial plan bridges the
OK I try so hard to follow what you're doing but it makes little sense
to me.
I'm guessing you'll need to set/export hangup_after_bridge=false to
prevent the hangup from taking place on B and C!
The other option is to uuid_transfer both B and C to park using the -
both then hangup on C and
On Tue, Aug 11, 2009 at 1:43 PM, Phillip Jones pjinthe...@gmail.com wrote:
Hi Michael,
Thanks for trying to help with this.
action application=set data=continue_on_fail=true/
action application=bridge
data=sofia/gateway/broadvox/6095553828,sofia/gateway/broadvox/7325553828/
!-- if
samuel wrote:
I'm also for different spanish localization if it's not too complicated.
It was also for me the first time I see signo de número for pound ;)
I just idly noticed this - so just a comment from a Brit who iteracts
quite a bit with Americans.
The # symbol in the UK is not
Thanks for the explanation. I was trying to find the correct way to do this
as I saw several ways of doing this. I will try to explain how I did on the
asterisk land.
In asterisk land, Caller A will be parked at extension 701 and Caller B
transfers the call to extension 701 and and Caller A and C
On Aug 11, 2009, at 2:33 PM, Shameem Shiek wrote:
Thanks for the explanation. I was trying to find the correct way to
do this as I saw several ways of doing this. I will try to explain
how I did on the asterisk land.
In asterisk land, Caller A will be parked at extension 701 and
again, this issue should be addressed when you do a sound set for that
dialect, we are attempting to keep the c code common for all dialects
within a language, we will see if this works unless anyone can point
to a place this will not work.
Mike
On Aug 11, 2009, at 3:25 PM, Alan Chandler
Mike, the gender thing will eventually have to change code, I guess. I have
not yet looked at the say code, so I am just imagining here.
On Tue, Aug 11, 2009 at 4:45 PM, Michael Jerris m...@jerris.com wrote:
again, this issue should be addressed when you do a sound set for that
dialect, we
What value is in the variable ${some} ?
-MC
On Mon, Aug 10, 2009 at 1:43 PM, bakko asannu...@gmail.com wrote:
I'm tryng to put a variable in a IVR digits line like this:
entry action=menu-exec-app digits=${some} param=transfer 1001 XML
default/
but don't work
Is It possible tu use this
2009/8/11 João Mesquita jmesqu...@gmail.com
Mike, the gender thing will eventually have to change code, I guess. I have
not yet looked at the say code, so I am just imagining here.
Are there gender differences between dialects of the same language?
-MC
What he is wanting is not possible.
/b
On Aug 11, 2009, at 2:54 PM, Michael Collins wrote:
What value is in the variable ${some} ?
-MC
___
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
Oops, I thought you were saying different languages. Sorry about that.
jmesquita
On Tue, Aug 11, 2009 at 4:54 PM, Michael Collins m...@freeswitch.org wrote:
2009/8/11 João Mesquita jmesqu...@gmail.com
Mike, the gender thing will eventually have to change code, I guess. I
have not yet
Thanks Michael,
pseudo code would look this.
1) Call 609555 and 732555 simultaneously.
2a) As you dial 609555 go to the next carrier if you receive
NO_ROUTE_DESTINATION.
2b) As you dial 732555 go to the next carrier if you receive
NO_ROUTE_DESTINATION
3) The first number to
Just to add my $0.02-worth (if you're feeling generous..) - I don't
think that the dialplan is expressive enough to do what's needed here,
and that's where the trouble's coming from. It's not enormously tricky
to build a generic dial this set of numbers according to these rules
service using
It resolves fine for me already.
On Tue, Aug 11, 2009 at 2:54 AM, Diego Viola diego.vi...@gmail.com wrote:
The address for me is: 69.174.57.101
On Tue, Aug 11, 2009 at 1:20 AM, Godson Gera godso...@gmail.com wrote:
Ok here is the address 69.174.57.101 . Most of the time I use OpenDNS for
Does it still give you connection refused?
/b
On Aug 11, 2009, at 2:59 PM, Diego Viola wrote:
It resolves fine for me already.
On Tue, Aug 11, 2009 at 2:54 AM, Diego Viola diego.vi...@gmail.com
wrote:
The address for me is: 69.174.57.101
On Tue, Aug 11, 2009 at 1:20 AM, Godson Gera
Nope.
On Tue, Aug 11, 2009 at 4:01 PM, Brian West br...@freeswitch.org wrote:
Does it still give you connection refused?
/b
On Aug 11, 2009, at 2:59 PM, Diego Viola wrote:
It resolves fine for me already.
On Tue, Aug 11, 2009 at 2:54 AM, Diego Viola diego.vi...@gmail.comwrote:
The
I guess that makes sense, but that's not the answer I wanted to hear. I
don't necessarily know when the B leg is going to hangup so I may not be
able to do the re-invite beforehand. Is there some sort of workaround?
On Tue, Aug 11, 2009 at 12:50 PM, Phillip Jones pjinthe...@gmail.comwrote:
Hi
Also, if I understand bypass_media, the SIP signaling is going through
FreeSWITCH and the audio is endpoint to endpoint, so I would think the
manner in which the B leg hangup is handled is controlled by FreeSWITCH.
That is what appears to be happening in the debug.
On Tue, Aug 11, 2009 at 2:13
OK. I am little confused here. You say I can transfer to a parked call
using uuid_transfer . I do not see any options there where would or how
would I specify parked call in the options.
Can I do:
uuid_transfer uuid -both park
Where park is the destination?
On Tue, Aug 11, 2009 at 3:40 PM,
You also have uuid_park... but uuid_transfer to the dialplan were the
extension calls the park application.
/b
On Aug 11, 2009, at 3:27 PM, Shameem Shiek wrote:
OK. I am little confused here. You say I can transfer to a parked
call using uuid_transfer . I do not see any options there
We have a plan to address this already, I can't recall if we added the
gender types in code yet.
Mike
On Aug 11, 2009, at 3:56 PM, João Mesquita wrote:
Oops, I thought you were saying different languages. Sorry about that.
jmesquita
On Tue, Aug 11, 2009 at 4:54 PM, Michael Collins
The value of ${some} is 1234.
Thank you.
BR
What value is in the variable ${some} ?
-MC
___
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
Sorry, but could you give me a pointer on what this involves or where to
read up on it please?
Brian West wrote:
you have to now apply the ACL correctly to the sofia profile.
/b
On Aug 11, 2009, at 2:38 AM, Kevin Golding wrote:
Thanks Brian,
Well spotted with the domain/cidr :)
I
I would guess in conf/sip_profiles/internal.xml where it applies the
domains ACL to the profile... you can change that or add additional
lines to apply more ACL's to the profile.
/b
On Aug 11, 2009, at 4:21 PM, Kevin Golding wrote:
Sorry, but could you give me a pointer on what this
As Brian mentioned earlier, what you are trying to do is not possible in the
ivr.conf.xml file. Variables are not interpolated in the digits param. If
you need this dynamic functionality you will need to investigate
mod_xml_curl which allows you to create dynamic dialplans, etc.
-MC
On Tue, Aug
Thank you Brian. Have got the ACL issue sorted with your help - thank
you. See new thread for my next problem :)
kevin
Brian West wrote:
I would guess in conf/sip_profiles/internal.xml where it applies the
domains ACL to the profile... you can change that or add additional
lines to apply
It's also simple enough to write a plugin in one of the scripting languages to
add an app to do exactly what you want...
-Original Message-
From: freeswitch-users-boun...@lists.freeswitch.org
[mailto:freeswitch-users-boun...@lists.freeswitch.org] On Behalf Of David Knell
Sent: Tuesday,
http://files-sync.freeswitch.org/ works fine.
On Wed, Aug 12, 2009 at 12:56 AM, Diego Viola diego.vi...@gmail.com wrote:
Resolving files.freeswitch.org... failed: Temporary failure in name
resolution.
Again...
On Tue, Aug 11, 2009 at 4:03 PM, Diego Viola diego.vi...@gmail.comwrote:
Diego Viola diego.vi...@gmail.com wrote:
Resolving files.freeswitch.org... failed: Temporary failure in name
resolution.
It must be a problem at your end.
ja...@jdc:~$ host files.freeswitch.org
files.freeswitch.org is an alias for filessync.freeswitch.netdna-cdn.com.
71 matches
Mail list logo
