Does this count if my email is set in holiday mode for 10 days?
On Dec 27, 2017 10:12 PM, "Len Gerstel" wrote:
> Folks,
>
> Just a reminder.
>
> The recent email about purging the list was only about purging email
> addresses that were bouncing back as undeliverable.
>
> So,
I have ordered a CF to IDE card from ebay. I'd like it to replace my old
hard drive on the Performa 5300.
Do I just install it and and then install OS 8 from the CD drive?
DO I have to do anything else that I wouldn't do if it was a normal HDD?
--
--
You received this message because you are a
The hard drive on my PM 5300 looks like it has failed. Is there any truth
that freezing the drive might restore it or is it one of those myths?
--
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on
Hi everyone.
I decided to give an old Performa 5300 a go.
the built in monitor comes up and a disk with a question mark that keeps
flashing.
I tried holding down the option key when booting up to see If it would give
me boot up choices, but just the same.
Does anyone remember other boot option
Thanks!
On Saturday, February 18, 2017 at 5:25:28 AM UTC+2, Valter Viglietti wrote:
>
> Il giorno 18/02/17 02.47, "Alex Ander" ha scritto:
>
> > Is there a list of OS# that show up to where I can go with my G4?
>
> I think it depends on the G4 model. Th
Is there a list of OS# that show up to where I can go with my G4?
Thanks.
--
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml
I have a DVD of ASD. Do you need it?
On Mon, Mar 16, 2015 at 10:43 AM, j.e.roman...@gmail.com
j.e.roman...@gmail.com wrote:
Looking for AHT, ASD, install discs, advice, etc. for resurrection of
quite dead PowerMac7,2 DP1.8GHz. Inherited with diagnosis of bad power
supply and no hard drive.
IIRC you should be able to use file vault.
On Jul 18, 2014 7:28 PM, smac0031 m.smurph...@gmail.com wrote:
Hello,
I have an extremely important file that I need to send to someone. I've
never bothered with encryption because I've never had to send anything this
important before. This is not
On Jun 2, 2014 12:23 PM, Nestamicky nestami...@gmail.com wrote:
On 14-06-02 11:34 AM, Bruce Johnson wrote:
This is all very good discussion. Wonderful information here. Thanks a
lot guys! Perhaps we could move it along more to the point of practical
information, if folks could pitch in with
That isn't a bad idea...
--
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette
guide is at
It does not show the password, but it is typing.
On Jan 27, 2014 5:48 AM, Zaphod fth...@sbcglobal.net wrote:
I tried to perform the terminal shutdown listed earlier, but after
terminal asked me for my password, the cursor didn't move. I couldn't enter
my password. I don't know what I may be
You will have no issue with a SATA III drive. Good luck!
--
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our
No problem! Happy to help!
On Jan 25, 2014 1:51 PM, Dana Collins dlcatft...@frontier.com wrote:
Thank you, Alex.
Appreciate the confirm.
Regards,
Dana
On 1/25/14 3:27 PM, Alex Sciortino of zeosr...@gmail.com sent
You will have no issue with a SATA III drive. Good luck!
--
--
You
Boot the Mac in Target Disk mode and plug it into the Mac Pro. If it is
detected, firewire is functional. If not, it is dead and you need to remove
the kext.
-- Alex Sciortino
http://windows8sales.com/
From: Herbert Goodfriend bon...@mailforce.net
Reply-To: g3-5-list@googlegroups.com
Date
Do you have the same problem on the PowerBook if you take it to a friends
house? If it is fine there, it is the router, if not, it is your machines.
‹ Alex Sciortino
http://windows8sales.com/
On 1/17/14, 6:55 AM, Nestamicky nestami...@gmail.com wrote:
On 14-01-17 6:26 AM, t...@nehaia.dk
What does it say in console around when you try to go to sleep?
‹ Alex Sciortino
http://windows8sales.com/
On 1/15/14, 7:55 PM, Herbert Goodfriend bon...@mailforce.net wrote:
I have a Mac Mini G4 1.5GHz running MacOS 10.4.11.
A few days ago, two problems started:
1. The machine would
Not necessarily. Sometimes an Archive and Install can solve many issues.
Just because it is a Mac does not mean system files cannot get corrupted.
‹ Alex Sciortino
http://windows8sales.com/
On 1/14/14, 7:03 AM, Bruce Johnson john...@pharmacy.arizona.edu wrote:
Re-installing the OS
I realize that. That was just in response to Bruce saying that it rarely
fixes things. My bets are on the PMU. Reset that and I think it will likely
fix it. It is the small tact switch on the logic board.
‹ Alex Sciortino
http://windows8sales.com/
From: Kris Tilford ktilfo...@cox.net
Reply
So, if the machine is restarted or shutdown, it will not boot for 5-6 tries.
When it boots, it is fine. The PRAM battery is definitely bad. The LCS did
leak, but has been repaired. It idles at 63c, so I am thinking that is is
possible that the previous owner who repaired the LCS may of used bad
Have you tried resetting the PMU? Or reinstalling OS X?
My DA G4 doesn't shut down when you select shut down from the menu. It just
malingers.
--
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus
InterestingŠ Have you tried a PMU and a PRAM reset?
--
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette
Well at least you got the G5 sorted. IMHO, the monitor will need a recap. If
you don't have much experience soldering, I would ask a friend. If you can't
find capacitors with the same value, you can go up in voltage. Good luck!
--
--
You received this message because you are a member of
I am not sure when they released Lion, but IIRC it was 11'. Any Mac before Lion
will do. I would go MBP.
--
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at
IIRC MDDs don't support OS9.
--
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette
guide is at
Try booting while holding option. You should have a boot disk selection thing
at that point.
--
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at
Try a IDE SCSI adapter. I am sure that it is a standard IDE drive in a FireWire
to IDE case.
--
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at
Hello. I have a dual 500mhz Powermac G4 that needs a new processor. I popped it
into my 400mhz Mystic and had the same issue of no boot. With the 400mhz CPU
both work fine. Where would I get a replacement and should I get the sonnet
1ghz upgrade? This is used as a FTP server.
--
You received
Ok thank you. I have found one for $20. Do you think that would be a fair
price, or should I keep looking?
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at
I ordered the 450mhz replacement. Are there any things I can do it improve my
server's performance?
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at
If that error is CPU cache replace it. My issue started with that and it
refused to bong today. They are cheap enough. I would recommend a dual 800mhz
or faster if you want to use it for anything other than a server.
--
You received this message because you are a member of G-Group, a group
I may be wrong, but my old 9600 would work with a G4. The 9600 is from a G5.
The card is 8x but the Mac is 4x.
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at
You can swap the cards if the one in the QS is good.
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette
It will work fine
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette
guide is at
Darn. Unfortunately this means my primary system will be upgraded to a Mac Pro.
Oh well it will be a nice upgrade from a QS 2002.
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The
need an OS.Therefore
I need to know if Leopard 10.5 will work, where can I purchase it and how to
install it on a machine that has no OS system at all.Thank you for any imput
...Alex
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop
Once the PS dies, it's tough. Even used supplies aren't cheap. If you don't
need ADC you can mod a ATX PSU to work.
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at
Hello. I have set up FTP server on my G4, but it shows the root of my boot
drive an not the raid array that is what I set up as a shared folder. How can I
get it to show my shared folder and not my boot drive? Thanks in advanced.
--
You received this message because you are a member of
Before now were you receiving them on a regular basis?
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette
Reset the CUDA and the pram. If that doesn't work, try a new graphics card.
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml
I have the DP 2.0. I have reset the CUDA. I have the stock card in it now, but
had a 9800 Pro in it. It bongs and boots fine just no video. If I change the
volume I get blips and everything.
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and
I have reseated the ram and will be reseating the processors tomorrow.
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and
Thanks to all of you. The guy bought it from is replacing it tomorrow.
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and
My PowerMac G5 won't display anything on screen. It boots and it seems to work,
just nothing is on the screen. I reset the PMU replaced the video card and
reset the PRAM and tried a different display. Any advice? Thanks in advanced.
--
You received this message because you are a member of
That isn't working either. Even the Leopard install CD won't work.
It's possible the video got set to a mode the monitors don't support. Try
holding down the shift key during start up to boot into safe mode.
--
You received this message because you are a member of G-Group, a group for
those
I switch between displays with a G4 and it works. I will reset the NVRAM when I
get home.
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at
Resetting the NVRAM and PRAM didn't work. Any other advice?
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our
I have tried the card in my G4 and no issue.
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette
guide is at
I have tried both. I run the G4 in through VGA and the G5 though DVI. I tried
running the G5 with VGA but no dice. I also put the card from the G5 (9800 Pro)
into my G4 and it worked flawlessly. So I suppose this just got costly… Any way
to test the mobo and PSU?
--
You received this message
Thanks to everybody. Everything is working great now.
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette
Now I have a new issue. When I try to mount an smi, I get error type -39.
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml
That is what I thought so I redownloaded and it still didn't work.
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our
How would I fix this?
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette
guide is at
I have a PowerMac G4 that I need OS9 on for a firmware update. I have 9.0.4. I
installed it via target disk mode and was then going to update it to 9.1 via
target disk mode on a iMac running OS 9.0.4. The links on Apple's website are
bad, so I cannot get the update so the machine will boot.
Thank you very, very much!
http://www.mediafire.com/?64da0g3iih922
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our
Open the drive door flap at the Option key boot selector and you will see an
eject button. Grab a paper clip and press the button.
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The
No at least On my G4 I need a paper clip to hit the eject button.
I think you are merging things. If there is a button just press it. If there
isn't a button then insert a paperclip in the hole and push.
--
You received this message because you are a member of G-Group, a group for
those
Was there any lightning? If there was the onboard Ethernet may be shot.
So, any ideas about what is wrong with it, and what I can do to fix it?
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular
Use carbon copy cloner. It works great. You can set a schedule on it and it is
free.
Is there software that will do this automatically?
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power
I have a G4 Mystic and it is missing a screw on the side. It looks like it is
holds on the motherboard tray. Is it needed?
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ
It is the screw that is on the access panel. There are 4 that hold on the
mother board tray to be more specific. I am missing one.
On Jun 14, 2012, at 5:09 PM, Bruce Johnson john...@pharmacy.arizona.edu wrote:
On Jun 13, 2012, at 1:17 PM, Alex Sciortino wrote:
I have a G4 Mystic
I have a powermac G5. The drive door does not slide down to let the tray come
out unless you do it manually. After that it doesn't come back up.
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on
.
-- --
Illirik Smirnov
On Mon, May 21, 2012 at 4:17 PM, Alex Sciortino zeosr...@gmail.com wrote:
I have a powermac G5. The drive door does not slide down to let the tray come
out unless you do it manually. After that it doesn't come back up.
--
You received this message because you
On my powermac g5 the drive sticks in the downward position and doesn't come
up. How can I fix this?
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at
Does anybody know of an alternative?
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette
guide is at
Reseat the CPU and try the upgraded CPU and check if the heat sink is securely
mounted.
Sent from my iPhone
On May 14, 2012, at 6:58 AM, Valter Prahlad valter.prah...@fastwebnet.it
wrote:
Having acquired a G5, I'm in the process of selling my old PowerMac G4 DA.
It has an upgrade CPU (OWC
It's UNIX. Not Mac OS X. Most OSes have the permissions crud because
they are optimized for multi user systems. The only OS I know of that
doesn't have permissions is BeOS.
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs
Why are the PCI ports on the PowerMac G4s so long? On PCs they are
about 3 1/2 long but on a PowerMac G4 they are about 5
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ
If you go to CompUSA you can pick up some nice fans by SilenX. They are really
quiet and will make your G4 less noisy. I'm pretty sure they will work.
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus
The G4 could eat a higher clocked PIII for lunch.
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette
guide
10.4.11. You can take it to Leopard but you will need a CPU upgrade as it will
be painfully slow. As for Linux have you heard of MintPPC?
On Jun 5, 2011, at 9:37 AM, Daniel Attard wrote:
I have an old Power Mac G4 and I was wondering what is the best Mac OS
X version.I was also wondering which
Can you post the pictures of the slot and the card to photo bucket or
something? There is no difference in the slot of an AGP 1x, 2x, 4x, or 8x.
On May 24, 2011, at 7:53 AM, Baldassare Guzzo wrote:
OK Thanks. I thought the slot was the same and I just had to disable the
8x on the card. I
I got my Quicksilver dual 800 from FleaBay for $50 shipped. How long ago was
this?
I bought a DA online that someone had put a Dual 533MHz cpu from another DA.
I feel very fortunate to have it ... it was the first G4 I had really wanted
to buy when it first came out, but couldnt afford the
The reason why the battery can't be replaced is because it is so large, lasts
10, 7 or 8 hours depending on your model and can take up to 1000 cycles. How
does Steve Jobs decide what runs on Mac OS X??? An iMac with a Radeon 6970
coupled to a Sandy Bridge Core i7 is a bad hardware decision???
15:58, Alex Barnes wrote:
PPC linux has terrible 3rd party support. Most versions of software say
linux but don't specify that it's x86 or x64 only. You can pull it off
though. You'll need Debian Linux as it has the best PPC support.
On May 10, 2011, at 2:08 PM, imrazor wrote:
On May
That is thermal paste. It transfers heat to from the processor to the heatsink
(I think you knew that). Do you have a URL where I could see the picture with
the thermal paste?
On May 11, 2011, at 3:13 PM, Roger Dickinson wrote:
I'm about to exchange the 24-fin aluminium heatsink in a G4 MDD
Have you checked the monitor cable?
On May 11, 2011, at 2:59 PM, blindspot-smi...@yahoo.co.uk wrote:
Yes, Kris
Just to make it clear, taking into account your remarks.
The monitor will eventually fire up - might take two, three, four G5
power-ups,
might have to leave it for hours
You can also go with Linux Mint 10. I prefer it to Ubuntu. You can build a
cheap quad core system for under $500. Just get your parts form CompUSA.
On May 10, 2011, at 12:46 PM, Doug McNutt wrote:
At 22:36 -0400 5/9/11, admin wrote:
Adobe Flash 10.2 Intel only, I believe. Web sites are
PPC linux has terrible 3rd party support. Most versions of software say linux
but don't specify that it's x86 or x64 only. You can pull it off though. You'll
need Debian Linux as it has the best PPC support.
On May 10, 2011, at 2:08 PM, imrazor wrote:
On May 10, 1:46 pm, Doug McNutt
Open your Wi-Fi network and get FireSheep to see what they are looking at. lol
On Apr 26, 2011, at 11:17 PM, Norm wrote:
I have lived in rural Maine for almost 40 years and never locked my house or
car until this past January. Doors smashed, things taken worth a lot. Prep
took my insurance
A cycle is when the battery is drained to 0 percent and charged back up to 100.
If you let it drain to 75% and charge it back to 100% in constitutes only 1/4
of a cycle.
On Apr 20, 2011, at 2:04 PM, John Carmonne wrote:
On Apr 20, 2011, at 1:01 PM, John Callahan wrote:
Hello,
What is the
This seems to be a Leopard bug. That has happened to me several times,
all on Macs running Leopard. A simple downgrade or upgrade fixed the
problem.
On Apr 13, 2011, at 3:03 PM, Bruce - in Orlando wrote:
Can anyone tell me what the real problem is?
It appears the aluminum PowerBook suffers
Speaking of LBA48... Yellow Dog Linux and Debian Linux both report and use the
full 250 GB (because that is the size of my HD) in my QS 2001. But Mac OS 10.5
sees it as a 128 GB drive. I know this has nothing to do with the thread. But
good info none the less.
Actually, the only significant
Probably not...
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette
guide is at
I like it. Do you mind if I use it?
-- Give me liberty or give me Obamacare --
Snarky political comments are NOT appropriate to this list.
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on
You should use TenFourFox. It is designed for G4 processors and will run better
than Safari. It can also use all the FireFox add-ons.
He would probably have better luck using YouTube's HTML 5 option, perhaps
even uninstalling Flash and using Safari with the browser ID set to Safari
iPad.
Why does anyone care about rich text/plain text. This isn't the 90's anymore!
If your computer can't read rich text then you need to do some serious updates!
My PowerBook 1400 can read rich text on Gmail's website!
Why can't the list managers make some kind of a rich text block on the lists
Oh. So is that why the nannies say no to rich text?
http://dbdev2.pharmacy.arizona.edu/miscjunk/ihatehtmlmail.pdf
If you can't state your problem with your words, all the ransom-note
typography and hopping smileys will not help your case.
--
You received this message because you are a
I use Mail in 10.6 but I have it set to display rich text. Now I see why it's
hated.
On Mar 17, 2011, at 12:39 PM, Bruce Johnson wrote:
On Mar 17, 2011, at 10:31 AM, Alex Barnes wrote:
Oh. So is that why the nannies say no to rich text?
You'll have to ask them. It's a long-standing
Ok... I won't use read I'll use display.
Sounds like you've done some serious updating if your PowerBook 1400 has a
consciousness and can read. My computers lack consciousness and are limited
to dumb tricks like being able to display rich text, or synthesize speech
from text. I'd love to
Here's the URL http://www.floodgap.com/software/tenfourfox/
If you want there is another browser by the same group called Classilla
(http://www.floodgap.com/software/classilla/). Classilla is for Mac OS 9 to Mac
OS 10.3. It runs well on my RAM challenged iMac 333. And it should run like the
At least there's not flash emails going around (although I can see us headed
there)!
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at
Disk Utility in Mac OS X does the same thing (zeroing out drives) but you don't
need a PeeCee.
On Mar 13, 2011, at 5:19 AM, faithie999 wrote:
i rebuild old PC's and give them to a social worker to give to her
clients. i found this program
http://www.dban.org/Boot n Nuke
which yes, is a
Disk Utility in Mac OS X does the same thing (zeroing out drives) but you don't
need a PeeCee.
On Mar 13, 2011, at 5:19 AM, faithie999 wrote:
i rebuild old PC's and give them to a social worker to give to her
clients. i found this program
http://www.dban.org/Boot n Nuke
which yes, is a
Please post in english.
On Mar 10, 2011, at 6:12 PM, ricardo ferreira wrote:
http://www.flixxy.com/my-blackberry-is-not-working.htm
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power
Is it Flash video? My Dual 1.3 Quicksilver can barely play Flash video even
with a Radeon 9800.
I would like to be able to watch streaming TV shows from the network
websites, but the videos are really choppy.
--
You received this message because you are a member of G-Group, a group for
You should get a processor upgrade (preferably a dual), a better GPU (Radeon
9800 Pro), Leopard, and maybe a USB 2.0 card.
On Mar 6, 2011, at 12:07 PM, Baldassare Guzzo wrote:
Yeah Yeah! What hardware should I install
On Feb 25, 2011, at 10:41 PM, Dan wrote:
At 7:00 PM -0800
On my Quicksilver dual 800 it took actually gave it better Geekbench scores.
It took a hit on the graphics performance though it was using a Rage 128.
On Thu, Mar 3, 2011 at 7:49 AM, Al Poulin alfred.pou...@gmail.com wrote:
On Mar 2, 11:20 pm, Kris Tilford ktilfo...@cox.net wrote:
On Mar 2,
But you'll have to get used to the fact that it only has one chime. The iEgg
has 10 different sounds and the iEgg Pro has MacInTalk (remember that?)
installed so you can choose your favorite voice to tell you when times up!
Two dollars for an egg timer!?
You must be using an Apple iEgg or
The bootloader that comes with Linux mint is excellent. Too bad it's Intel only.
On Feb 20, 2011, at 6:44 PM, Tina K. wrote:
On 2011/02/20 09:00, Nestamicky so eloquently wrote:
Is there a better way of getting the option to select which OS to boot
to, in a dual boot (OS X 10.5 and Server)
A dual 1.8 G4 in 9.2? I can't even imagine how fast that would be.
Well IMHO In defense of the Dual 1.8 upgrade, some of us Mac addicts like to
get the old dogs dancing in the alley. Theres something to be said about the
wind up of the PM G4 fans not to spaek of being able to boot OS 9.2.2
1 - 100 of 172 matches
Mail list logo