Legacy in this case means a version of the program that will also work on
the machines of those of us who still run a 9.2.2 machine or two, due to
hardware/driver compatibility issues with a critical legacy function.
Is there a version of the program available that will work with these
'legacy
What is Optimrize?
Optim-rize? I could not find it with a Google search. Do you mean Optimize?
What is the source of the program that you are referring to? Part of Mac
OS or 3rd Party? If so what 3rd party and what version did you use?
Click
--
--
You received this message because
I have a 266MHz Beige G3 DT which is a workhorse for the OS 9 apps that it
runs. 768Meg memory, USB, FW, and ATA133 PCI cards. Is there a ZIF cpu
that I can install, perhaps from a B W, which would give me a noticeable
increase in speed? Other than speed, the fit of the DT to my needs is
Many thanks for all the help. The CUDA reset worked. I now how a working
500Mhz G4 in my Beige DT. A very noticeable difference in speed for the OS
9 apps.
--
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a
Has anyone here had any experience with installing a Sonnet G4 CPU 500Mhz
upgrade? I have installed the Sonnet software on my current OS 9.2 and
then powered down and installed a Sonnet G4 CPU in my DT Beige G3. On power
up the monitor and disks come on, but no chime.
The manual says
I saw a thread a while back
(here)https://groups.google.com/forum/m/?fromgroups#!topic/macos9/omLso5j1dkU
about
OS 9 native boot on a FW800 MDD machine. I just acquired one of these and
am curious if anyone got it to work. I very much need a native OS9 boot
machine. Is the workaround on a
Thanks for the response, Kris
*Why won't Classic suffice? *
I have done everything that I know to get a program to run in Classic
using a mini G4, but it does not perform certain critical output (file
write and report generation) functions. My understanding is that there are
certain
Yes, I understand, but usually the problem is a hardware issue rather
than a software issue.
Well, the behavior is interesting. The total report as printed on an OS 9
G3 should be, let's say, 4 pages: 3 detail sheets followed without
interruption or intervention, by a summary page
I cannot get my Beige G3 Desktop on System 9.2.2 to boot from my external
FW device, even though I set up an initial 7GB OS 9 System Partition using
Apple Partition Map. The Drive Setup on my Beige shows the FW device as
unsupported, which I figured was true for the Drive Setup program, not
In my post I mentioned that I tried the command+option+shift+del key
command on startup without result. That's the official command, according
to Apple http://support.apple.com/kb/TA43845?viewlocale=en_US. The same
non-response happens with option on startup. I did check to see that it
would
by the vendor when OS X
came about. Classic on my Mac minis Tiger doesn't fully work for one of
the apps, after MUCH experimenting.
Now off to eBay and Google for some SCSI shopping...
On Sunday, February 10, 2013 9:37:44 AM UTC-8, Kris Tilford wrote:
On Feb 10, 2013, at 10:39 AM, Click
about before I purchase? It looks like there's quite a variety of SCSI
interfaces and protocols out there to my uneducated eye, at least.
On Sunday, February 10, 2013 11:17:50 AM UTC-8, billycarmacs wrote:
On Feb 10, 2013, at 1:27 PM, Click wrote:
Tnx, Kris. That's what I was beginning
OK, Thanks so much to all for the good ideas. You're a knowledgeable and
resourceful bunch! I'll post back with what I decided to do.
--
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power
13 matches
Mail list logo