Dear All,If the agricultural waste briquette have theComposition of Cane
Trash-40%, sawdust-20%, Cotton stalk / Mustard-30%, other Biomass waste-10%
withMoisture Ash 10%, GCV -3500-3800 kcal / Kg, Bulk Density
-800 kg / m3, then:1. What will be the Air / Fuel ratio for agricultural
waste
Dear All,
For steam
oxygen fixed bed coal gasification process,
1 kg coal + 0.8
kg oxygen + 0.3 kg steam = 2.1 kg of syngas / kg of coal
This syngas calorific
value is 3680 kcal/kg
Input Pressure
at 100 bar
Approximate syngas
composition,
CO nbsp;nbsp;nbsp;nbsp; = nbsp;60%
Dear All,
Producer gas heating values is 1200 kcal / nm3 @ 30°C
In normal case 1kg wood + 1.5 kg air = 2.5 kg of producer gas ~ 2.5 m3 of
producer gas @ 30°C
1m3 of producer gas = 1200 kcal
Therefore 2.5 m3 of producer gas = 1200 X 2.5 = 3000 kcal / m3 @ 30°C
In our case
Dear All,
Producer gas heating values is 1200 kcal / nm3 @ 30°C
In normal case 1kg wood + 1.5 kg air = 2.5 kg of producer gas ~ 2.5 m3 of
producer gas @ 30°C
1m3 of producer gas = 1200 kcal
Therefore 2.5 m3 of producer gas = 1200 X 2.5 = 3000 kcal / m3 @ 30°C
In our case
Dear Booster Reed and Tom Miles,
What are the gases emitting in ppm of after direct burning the producer gas?
A. Saravanakumar
On Thu, 23 Aug 2012 00:31:52 +0530 wrote
Send Gasification mailing list submissions to
gasification@lists.bioenergylists.org
To subscribe or
Dear Sir,
We have run the gasifier for 6 hours an Aluminum meal melting industry. Blower
details are given blower Blower capacity = 500 CFM and pressure = 500mm water
column
For 300kg /hr wood consumption we have need 450 kg of air is needed. Final
outlet gas as 750kg/hr is produced.
Dear All,
In biomass gasification
a. 1TPH down draft gasifier 1500kg /hr air flow is needed for 1ton
of wood is gasified. So gas produced for 2500 kg /hr. Air blower
pressure is 300mm water column. Air blower CFM is 1000.
Practically, for some people using
b. The same
Dear All,
In biomass gasification
a. 1TPH down draft gasifier 1500kg /hr air flow is needed for 1ton
of wood is gasified. So gas produced for 2500 kg /hr. Air blower
pressure is 300mm water column. Air blower CFM is 1000.
Practically, for some people using
b. The same 1TPH down
Dear Booster Reed,
How much ton of biomass will burn to produce 1 ton of CO2?
A. Saravanakumar
On Fri, 19 Aug 2011 00:38:55 +0530 wrote
Send Gasification mailing list submissions to
gasification@lists.bioenergylists.org
To subscribe or unsubscribe via the World Wide Web, visit
