hin spike. The actual
boot image can be found under the /build/riscv-spike/bbl/bbl
(Berkeley Boot Loader). BBL implements the machine mode and also piggy
backs the Genode image.
Regards,
Sebastian
--
Sebastian Sumpf
Genode Labs
http://www.genode-labs.com · http://genode.org
Genode Labs Gm
with Ben [1] without any
success. It seems like AMD's AHCI controllers are either not standard
conform or might require additional initialization we are not aware of.
As a starting point you could instrument the 'Ahci::handle_irq' function
[2] in order to determine if any interrupts are received by t
Hi Jörg,
as a small addition to Normans' answer, we also wrote a porting guide:
http://genode.org/documentation/developer-resources/porting
Sebastian
--
Sebastian Sumpf
Genode Labs
http://www.genode-labs.com · http://genode.org
Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz
e or coroutine in
literature and nothing more than a stack and a 'setjmp/longjmp' construct.
I hope this helps,
Sebastian
--
Sebastian Sumpf
Genode Labs
http://www.genode-labs.com · http://genode.org
Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden
Geschäftsführer: Dr.-Ing. Nor
Hi Johannes,
I looked into the i2c driver. Are we talking about the 'i2c_dw_xfer'
function?
Regards,
Sebastian
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org!
n up by the
'Policy_agent' signal handler.
Regards,
Sebastian
P.S. I hope you are porting a driver and not writing one from scratch ;)
--
Sebastian Sumpf
Genode Labs
http://www.genode-labs.com · http://genode.org
Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden
Geschä
and tested in on NOVA as well. No
objections from my side - good job.
Next I would suggest to finish your proposal (item 15) and mark it as
final until Monday.
Cheers,
Sebastian
--
Sebastian Sumpf
Genode Labs
http://www.genode-labs.com · http://genode.org
Genode Labs GmbH · Amtsgericht Dresde
Hi Philipp,
On 03/28/2017 10:17 AM, Philipp Kerling wrote:
>
> Am Samstag, den 25.03.2017, 09:40 +0100 schrieb Sebastian Sumpf:
>> Sounds good, looking forward to your proposal.
> Thanks - I've submitted the draft. I'd be happy to hear any comments or
> suggestions you and the
Hi Philipp,
On 03/24/2017 09:47 AM, Philipp Kerling wrote:
> Hi,
>
> 2017-03-21 (火) の 10:49 +0100 に Sebastian Sumpf さんは書きました:
>>> Do you have any specific feature
>>> requests besides simple read/write?
>>
>> Read/write with native command queuing supp
Hi Philipp,
On 03/18/2017 07:36 PM, Philipp Kerling wrote:
> Hi,
>
> Am Samstag, den 18.03.2017, 07:44 +0100 schrieb Sebastian Sumpf:
>> Genode has two approaches with regard to drivers: First, we write our
>> own (e.g., AHCI, SD, or ACPI) and second, we port them if we
Hey Philipp,
On 03/17/2017 11:02 PM, Philipp Kerling wrote:
> Hi Sebastian,
>
> Thanks for looking through my findings.
>
> Am Freitag, den 17.03.2017, 11:01 +0100 schrieb Sebastian Sumpf:
>> Loading Genode with GRUB2 is sufficient. The main goal is, as you
>> said,
ink/slashdot
> ___
> genode-main mailing list
> genode-main@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/genode-main
>
--
Sebastian Sumpf
Genode Labs
http://www.genode-labs.
On 02/06/2017 10:00 PM, Hack wrote:
> On 02/06/2017 08:02 PM, Sebastian Sumpf wrote:
>> Hi,
>>
>> On 02/06/2017 03:42 PM, Hack wrote:
>>> Hi,
>>>
>>> I am currently using Qubes OS, but with the next release, I will have to
>>> upgrade
Hi,
On 02/06/2017 03:42 PM, Hack wrote:
> Hi,
>
> I am currently using Qubes OS, but with the next release, I will have to
> upgrade my hardware. And it will cost me a lot.
>
> Anyway, I started to look at Genode OS, but I can't find an hardware
> support list.
>
> Questions:
>
> 1. How to
Hi everyone,
for 2017 my goal is to get Intel graphics hardware support into Genode.
By now I have the intel_fb driver running on Broadwell, featuring OpenGL
and libDRM, all in one component. The future task is to separate the
driver from libDRM and define some sort of GPU session so multiple
Hey Denis,
On 09/24/2016 06:20 PM, Denis Huber wrote:
> Dear Genode Community,
>
> perhaps the wall of text is a bit discouraging to tackle the problem.
> Let me summaries the important facts of the scenario:
>
> * Two components 'ckpt' and 'target'
> * ckpt shares a thread capability of
eing started. I fixed this and it works for now. It might just be a
bug, but I will discuss this issue tomorrow.
Regards,
Sebastian
> Thank you for your help in advance ^^
>
>
> Kind regards,
> Denis
>
> On 31.08.2016 18:23, Sebastian Sumpf wrote:
>> Hi Denis,
>&
0 fc:01 6565379
> /tmp/genode-1000/ds-63 (deleted)
> 2b7c3088a000-2b7c30a1a000 rwxs fc:01 6565460
> /tmp/genode-1000/ds-125 (deleted)
> 2b7c30a1a000-2b7c30baa000 rwxs fc:01 6565464
> /tmp/genode-1000/ds-126 (deleted)
> 2b7c30baa000-2b7c30d3a000 rwxs fc:01
Hi Menno,
On 08/30/2016 03:43 PM, Menno Valkema wrote:
> Hi Everyone,
>
> I'm currently using a Nic_connection to exchange data data between
> components on linux_x86.
>
> Before sending data from the Nic server I first check whether any data
> can be freed. Even before the first packet is send
ode-CheckpointRestore-SharedMemory/blob/93eaec436ce9b6d3b3a6663558bff9af925ae70f/run/fault_handler.run
>
>
> Kind regards,
> Denis
>
> On 30.08.2016 14:36, Sebastian Sumpf wrote:
>> Hi Denis,
>>
>>> Signal_handler sigh = {env.ep(), *this, ::_handle_fault};
>>
>
interpreter,
while also handling the C-code side of some modules. Since our resources
are very limited, I invite you to fill in this gap and will gladly
answer questions if you chose to proceed in this direction.
Cheers,
Sebastian
--
Sebastian Sumpf
Genode Labs
http://www.genode-labs.com · http:/
Hey Johanna,
On 07/28/2016 06:20 PM, Johanna Steer wrote:
> Hi Sebastian,
>
> i am using QEMU.
Ok, then the thing has a bug. I might have a look into it, if I can find
the time. Otherwise, you could try a different Qemu version. We use
2.3.0 over here and have used 1.5.0 before that, maybe
Hi Johanna,
On 07/26/2016 10:58 AM, Johanna Steer wrote:
> Hi,
>
> i am working on a toolchain monitoring the schedluing behavior of the
> fiasco.oc kernel. The data is monitored through the trace service (quota
> for trace is 2M).
> It is then sent to an offline system through an active
log output?
Console only is unfortunately not sufficient here. So, for now I would
leave 'nic_drv' commented.
Sebastian
> On Fri, Jul 1, 2016 at 11:22 AM, Sebastian Sumpf
> <sebastian.su...@genode-labs.com
> <mailto:sebastian.su...@genode-labs.com>> wrote:
>
> Hi John,
k fine with an e1000 setting, for it is just a device
model there that uses the Linux infrastructure.
Regards,
Sebasitan
> On Fri, Jul 1, 2016 at 1:29 AM, Sebastian Sumpf
> <sebastian.su...@genode-labs.com
> <mailto:sebastian.su...@genode-labs.com>> wrote:
>
> Hi John
Hi John,
On 06/30/2016 03:58 PM, john stokes wrote:
> qemu-system-i386: Unsupported NIC model: r8169
Qemu does not have r8169 support but only rtl8139.
Regards,
Sebastian
--
Sebastian Sumpf
Genode Labs
http://www.genode-labs.com · http://genode.org
Genode Labs GmbH · Amtsgericht Dres
Hi,
On 06/16/2016 10:06 PM, Guido Witmond wrote:
> Hi All,
>
>
> A small update on my experiments:
>
> - the site ran stable for about a week;
>
> - but it got stuck on some interrupt [1]; perhaps a resource leak
> somewhere. Are there known leaks in libc, vfs, lwip?
>
> - it's not so slow
:
> On Tue, 28 Jan 2014 22:48:25 +0100
> Sebastian Sumpf <sebastian.su...@genode-labs.com> wrote:
>> On 01/28/2014 10:22 PM, Julian Stecklina wrote:
>>> On 01/28/2014 01:07 PM, Sebastian Sumpf wrote:
>>>> Thanks for your tests! But I don't like the 65 MBit/s thing!
fault in future versions and make it
configurable, since you are not the first where it caused trouble.
Cheers,
Sebastian
--
Sebastian Sumpf
Genode Labs
http://www.genode-labs.com · http://genode.org
Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden
Geschäftsführer: Dr.-Ing. Norman Feske,
Hi Menno,
On 03/03/2016 03:13 PM, Menno Valkema wrote:
> Hi Everyone,
>
> While playing around with the new riscv support, I followed the
> instructions in the release notes in order to build a riscv toolchain
> from scratch. (See section 'Steps to test Genode on RISC-V', url
>
ing?
Qemu requires SDL for the display. Please add:
QEMU_OPT += -sdl
to your build.conf file that should fix the issue.
> By the way, the `make prepare` for libports is only suggested in
> etc/build.conf; it might be helpful to include it on the instructions
> for
Hi Paulo,
On 02/04/2016 04:04 PM, Paulo wrote:
> Hi all,
>
> I'm trying to get the genode demo to run on Virtualbox, from a windows
> server 2012 box.
> I've been to the (awesome) Sunday talk at FOSDEM and the prospect of
> getting genode running on my personal laptop is really exciting, but I'd
ine (Seoul or VirtualBox) or as a paravirtualized
version on top of the Fiasco.OC kernel. If this is not sufficient, what
is your approach?
Sebastian
--
Sebastian Sumpf
Genode Labs
http://www.genode-labs.com · http://genode.org
Genode Labs GmbH · Amtsgericht Dres
fault) they are stripped. I am not sure about the Fiasco kernel
itself though.
Just in case, try a 'objdump -h ' on your program, if the
output shows '.debug.*' sections, the binary is unstripped.
Regards,
Sebastian
--
Sebastian Sumpf
Genode Labs
http://www.genode-labs.com · http://g
k with a
> SATA disk that supports native command queuing (the HBA supports it)?
I added experimental support for non-NCQ devices/HBAs:
https://github.com/ssumpf/genode/commit/b2ba7ef2f474056a59e0311623c4053586a11ba1
If you want, give it a try,
Sebastian
--
Sebastian Sumpf
Genode Labs
re is no reason, the ATA commands should also be moved to this file.
Cheers,
Sebastian
--
Sebastian Sumpf
Genode Labs
http://www.genode-labs.com · http://genode.org
Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden
Ges
). Overwrite!
What changes are required to manage multiple devices with the same type.
If both PL2303s have the same product and vendor ids, it is currently
unsupported, since right now we cannot distinguish them at the USB
server side.
Regards,
Sebastian
--
Sebastian Sumpf
Genode Labs
http
will see warnings right
at the beginning of the build process.
Cheers,
Sebastian
--
Sebastian Sumpf
Genode Labs
http://www.genode-labs.com · http://genode.org
Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden
Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth
and the interrupt of the USB host
controller. The other way would be to write a Linux-stub driver that
directly communicates with Genode's USB driver.
Cheers,
Sebastian
--
Sebastian Sumpf
Genode Labs
http://www.genode-labs.com · http://genode.org
Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz
well documented, if at all (e.g., Snapdragon). With the only well
documented SoC (Texas Instrument's OMAP) gone, smartphone platforms have
become really really hard to deploy without having manufacturer support.
Cheers,
Sebastian
--
Sebastian Sumpf
Genode Labs
http://www.genode-labs.com · http
/build.conf' below the other 'REPOSITORIES' entries
call:
make run/hello
from the build directory. Watch out for Linux packets that are not
installed, like TCL or TCL's 'expect' package!
I hope this helps,
Sebastian
--
Sebastian Sumpf
Genode Labs
http://www.genode-labs.com · http://genode.org
when porting Linux code,
Sebastian
--
Sebastian Sumpf
Genode Labs
http://www.genode-labs.com · http://genode.org
Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden
Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth
On 05/31/2015 08:53 AM, Nobody III wrote:
My mindset has basically been that it when it could take me hours to
find a solution that someone else already knows, it seems a little
pointless. As for Git specifically, it seems like a tool with many
advanced features, most of which I'll never use.
. Update Genode's cxx library
2. Get base-hw compiling
3. Add UART support and implement the platform dependent kernel part
4. Extent the dynamic linker
5. (look into libc)
So, maybe there is something for you there.
We aware of the efforts you described above.
Cheers,
Sebastian
--
Sebastian Sumpf
:-)
Cheers,
Sebastian
--
Sebastian Sumpf
Genode Labs
http://www.genode-labs.com · http://genode.org
Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden
Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth
On 02/28/2015 02:12 PM, Madhu (Macaque Labs) wrote:
On Sat, Feb 28, 2015 at 9:57 AM, Sebastian Sumpf
sebastian.su...@genode-labs.com
mailto:sebastian.su...@genode-labs.com wrote:
On 02/28/2015 02:38 AM, Madhu (Macaque Labs) wrote:
Who are the ARM cpu vendors who publish
On 02/27/2015 09:08 PM, Mohammad Hamad wrote:
Hi all,
in libc/src/lib/libc there is Dummies.cc file which contains many methods.
Actually i am trying to port ISAKMP which use most of them ( such as fork,
getuid ,
socketpair, sendmsg and etc) . i was able to compile it but i face many no
--
Sebastian Sumpf
Genode Labs
http://www.genode-labs.com · http://genode.org
Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden
Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth
--
Dive
run script as sufficient information.
Providing the run script enables us to examine the issue more
directly and on certain accounts it can be turned into a regression
test.
Do you have serial output by now? If not, that should be the first thing
to fix.
Sebastian
--
Sebastian Sumpf
Genode
adapters like ASIX
88172/88179 and SMC95xx devices, but not for wifi as of now.
By the way, what is the status of your USB-serial output? Still looking
forward to seeing some, because IDE has to be re-enabled sooner or later.
Sebastian
--
Sebastian Sumpf
Genode Labs
http://www.genode-labs.com
above, something is really messed up. In that case I would advice you
that you send us the complete output of the test run, your exacts
hardware specifications, and if possible a working run script.
Regards,
Sebastian
--
Sebastian Sumpf
Genode Labs
http://www.genode-labs.com · http://genode.org
and connect it to
your developers box, if the box doesn't have an rs232 jack, an USB to
R232 adapter will suffice. In order to see something you will need a
serial program like minicom, picocom, or even socat on your development box.
Sebastian
On Nov 3, 2014 11:28 AM, Sebastian Sumpf
://www.kernkonzept.com and of course the l4hackers list
http://os.inf.tu-dresden.de/mailman/listinfo/l4-hackers).
Sebastian
--
Sebastian Sumpf
Genode Labs
http://www.genode-labs.com · http://genode.org
Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden
Geschäftsführer: Dr.-Ing. Norman Feske
Qemu 1.5.1),
haven't tested base-fiasco lately, it might work without IPAPIC. On the
other, base-nova should work.
Sebastian
Christian
On October 31, 2014 7:54:27 AM CET, Sebastian Sumpf
sebastian.su...@genode-labs.com wrote:
Hi again,
On 10/30/2014 11:11 PM, Nobody III wrote:
I have tested
next week and, since wrote the thing, he might be able to clear
things up.
Cheers,
Sebastian
--
Sebastian Sumpf
Genode Labs
http://www.genode-labs.com · http://genode.org
Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden
Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth
and they have fixed
some serious memory issues there (especially with the paging daemon).
If you have a current Genode version, then there is something wrong with
the memory accounting, which leads Rump to think it has got more memory
than the Genode quota actually suggests.
Sebastian
--
Sebastian Sumpf
On 07/29/2014 10:14 AM, Daniele Lacamera wrote:
Hello,
I've stomped onto an old post on this list, considering a port for picoTCP.
https://www.mail-archive.com/genode-main%40lists.sourceforge.net/msg01976.html
If I understood correctly, the major concern was around the threading model.
::Backend() Backend
blk_size 512 Afterwards the script stopped with Test execution timeout.
with error 254) What could I have done wrong with the configuration of this
scenario?
Ok, I will try to reproduce the behavior.
Regards,
Sebastian
--
Sebastian Sumpf
Genode Labs
http://www.genode
on GitHub and push it into a branch there, or if it is
just a run script just send it via email.
I think I can try file access and AHCI first on friday (ATM a lot of work,
I'm interested at genode because of part time study)
Good luck!
Sebastian
--
Sebastian Sumpf
Genode Labs
http://www.genode
Hi Bob,
On 04/02/2014 06:15 PM, Bob Stewart wrote:
On 04/02/2014 10:40 AM, Bob Stewart wrote:
I'm porting the musb driver code from Linux, using the 14.02 release of
Genode. Basically, I'm using the main.cc code in dde-linux/src/lib/usb
to start the usb subsystem and usb port drivers. The
On 04/04/2014 06:52 PM, Bob Stewart wrote:
Thank you Sebastian for your very clear explanation.
I'm moving forward now into the wonderfull world of platform device
initialization.
Good luck with that one .-) If it's an ARM-SOC, I would try to see if
Uboot could do the work for me,
/s, which is indeed pretty low. Right now the LXIP
stack should at least do about 500 mbit/s in either direction. Please
let me know what hardware platform you are using, so I can try to
reproduce the behavior.
Thanks,
Sebastian
--
Sebastian Sumpf
Genode Labs
http://www.genode-labs.com · http
Hi again Anna,
for the future, please sent your replies at the bottom not the top, like
I am doing now .-)
On 01/28/2014 11:58 AM, Анна Будкина wrote:
I'm measuring throughput between two hosts. I use genode running on
fiasco.OC on one machine and monolithic Linux on another machine.
There's
On 01/28/2014 01:20 PM, Christian Helmuth wrote:
Sebastian,
On Tue, Jan 28, 2014 at 01:07:19PM +0100, Sebastian Sumpf wrote:
Thanks for your tests! But I don't like the 65 MBit/s thing! What is
going on? Is this RX or TX?
Complete netperf output follows
Hi Vasily,
On 01/28/2014 12:58 PM, Sartakov A. Vasily wrote:
Hello.
If you can afford it and if you're running on x86, please try the Nova
version of Genode and let me know about the outcome, performance-wise of
course. I appreciate any hints why the ACPI-driver is not working (other
then
On 01/28/2014 01:49 PM, Анна Будкина wrote:
2014-01-28 Sebastian Sumpf sebastian.su...@genode-labs.com
mailto:sebastian.su...@genode-labs.com
On 01/28/2014 01:20 PM, Christian Helmuth wrote:
Sebastian,
On Tue, Jan 28, 2014 at 01:07:19PM +0100, Sebastian Sumpf wrote
--
Sebastian Sumpf
Genode Labs
http://www.genode-labs.com · http://genode.org
Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden
Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth
commit 300faf9de768e81fb319d05dfef0e8666c083e35
Author: Sebastian Sumpf sebastian.su...@genode
Hi Daniel,
On 07/17/2013 11:49 PM, Daniel Waddington wrote:
On 07/17/2013 01:05 PM, Sebastian Sumpf wrote:
Hi Daniel,
On 07/17/2013 09:41 PM, Daniel Waddington wrote:
On 07/17/2013 12:13 PM, Sebastian Sumpf wrote:
Hi,
Can someone point me to the relevant Fiasco.OC kernel changes made
. I'd like to see if I can get r56
running on Genode (to help me fix other issues).
I am already at it, I can push a preliminary branch of r56 tomorrow, if
you like, so you can check if the error still occurs.
Regards,
Sebastian
--
Sebastian Sumpf
Genode Labs
http://www.genode-labs.com
Hi Daniel,
On 07/17/2013 09:41 PM, Daniel Waddington wrote:
On 07/17/2013 12:13 PM, Sebastian Sumpf wrote:
Hi,
Can someone point me to the relevant Fiasco.OC kernel changes made by
Genode that might prevent the following error...
Could not assign parent interface to new PD
unknown
,
to see how the system is configured for the hello example.
Regards,
Sebastian
--
Sebastian Sumpf
Genode Labs
http://www.genode-labs.com · http://genode.org
Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden
Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth
for the first primary partition:
mknod /dev/sda1 b 254 1
You should now be able to mount sda1.
Regards,
Sebastian
--
Sebastian Sumpf
Genode Labs
http://www.genode-labs.com · http://genode.org
Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden
Geschäftsführer: Dr.-Ing. Norman Feske
L4Linux access the AHCI driver directly. What part_blk does is,
it exposes a 'single' partition as a block device to L4Linux and on a
partition there are no other partitions. It seems that is not what you
want to achieve.
Regards,
Sebastian
--
Sebastian Sumpf
Genode Labs
http://www.genode
Hi,
On 04/27/2013 10:51 AM, yuqing wang wrote:
Hi,
I used the foc_x86_32 platform to try part_blk run script ,there was a
error.
[init - atapi_drv] 5 and below: yes enabled: yes
[init - atapi_drv] PRD base at 002f9000 (physical) at 2000 (virtual)
[init - atapi_drv] Device initialized!
Hi Daniel,
On 03/28/2013 08:14 AM, Norman Feske wrote:
I have a problem with all my threads in a multi-threaded program
dead-locking on some (cancelable) lock in ld.lib.so. At this point it
I wonder if this problem may be related to an issue that was recently fixed:
on PandaBoard/OMAP4.
--
Sebastian Sumpf
Genode Labs
http://www.genode-labs.com · http://genode.org
Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden
Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth
. Multiplexing is not necessary, since the NIC device is
associated to the session. When a device interrupt occurs, the device
will report it to the session and the session in turn to the client.
Regards,
Sebastian
--
Sebastian Sumpf
Genode Labs
http://www.genode-labs.com · http://genode.org
Genode
the course of this year. But that heavily depends on our working
schedule, which happened to change quite often in the past. So I cannot
tell when, but MSI support will be implemented eventually.
Regards,
Sebastian
--
Sebastian Sumpf
Genode Labs
http://www.genode-labs.com · http://genode.org
call trace, such a thread
is scheduled using setjmp/longjmp calls (see:
dde_linux/src/drivers/usb/routine.h).
Regards,
Sebastian
--
Sebastian Sumpf
Genode Labs
http://www.genode-labs.com · http://genode.org
Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden
Geschäftsführer: Dr
. The 'Block::Connection' takes the 'tx_buf_size' as second
argument. To set the backing-store to one MB, you would have to
initialize the connection like this:
'static Block::Connection _blk(_block_alloc, 1024 * 1024);'
Regards,
Sebastian
--
Sebastian Sumpf
Genode Labs
http://www.genode-labs.com
.
Unfortunately I cannot investigate this further right now.
Greetings,
Sebastian
--
Sebastian Sumpf
Genode Labs
http://www.genode-labs.com · http://genode.org
Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden
Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth
#0 std
this?
Not in the immediate future.
Greetings,
Sebastian
--
Sebastian Sumpf
Genode Labs
http://www.genode-labs.com · http://genode.org
Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden
Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth
Hi Markus,
On 08/17/2012 10:40 AM, Markus Partheymueller wrote:
The parent-provides entry and the service name=CPU in provides
were not present in my last setup, but didn't change anything.
Am I missing something or is there a problem with the most recent
changes regarding the CPU session
Hi Markus,
On 07/13/2012 01:07 PM, Sebastian Sumpf wrote
I will test this however, when I get my hands on a hardware box. Until
then you're more than welcome to find out what is going on.
I've tested the USB driver on x86 as promised and fixed some issues that
appeared on real hardware
Hi Ivan,
On 07/13/2012 08:11 AM, Ivan Loskutov wrote:
Hello.
I try to extend OMAP4 frame-buffer driver for using with LCD. Your
HDMI example does not work. I try to read OMAP DSS registers and
receive strange values, for example: value DSS_REVISION is 0x0214,
other DSS and DISPC
On 07/12/2012 03:21 PM, Markus Partheymueller wrote:
DEBUG_IRQ revealed no real news for me, except for the fact that IRQ
10 was discovered, but apparently no interrupt came in, handle() was
not called once. So I added acpi_drv to my setup, resulting in a
different log. As you suggested, I
On 07/13/2012 01:07 PM, Ivan Loskutov wrote:
Thanks. With your u-boot HDMI is work and DSS registers read correct.
Nice!
--
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security
On 07/13/2012 03:24 PM, Alexander Boettcher wrote:
@Alexander Boettcher: Is there anything to consider regarding I/O
memory when using Nova with enabled IOMMU?
A quick lock into the specification of the NOVA kernel shows, that
assign_gsi returns the msi vector to be programmed (if the
Hi,
On 02/16/2012 06:40 PM, Michael Grunditz wrote:
On 02/16/2012 06:08 PM, Norman Feske wrote:
Hello again,
[init - test-libc] C++ runtime: int
[init - test-libc] void* abort(): abort called
I guess I get into c++ runtime, but what does int mean in this context ?
When I start test-libc
Hi Sam,
the output looks good and the test succeeded . The test mostly targets
C++'s exception support, for example the Exception during RPC tries to
open a Rom_connection to a file which is not available, therefore an
exception is thrown, when it reaches the test program everything is
fine.
Hi Sam,
On 03/18/2011 09:14 PM, Sam Kerr wrote:
Hi Sebastian,
Thanks for the suggestions. You pointing out several mistakes will be help me
out in the future.
However, I am not able to build the LDSO application using 'make run/ldso'.
Instead, it says :
Error: No run script for
Hi,
please apply the 'syscall_pic.patch' located under 'base-okl4/patches/'
to the OKL4 kernel and have a look at the 'README' file for an explanation.
Greetings,
Sebastian
On 09/16/2010 06:51 PM, Janith Widarshana wrote:
Thanx a lot Christian,
I could get rid of that problem and now i've
Hello again,
here is a small HOWTO for debugging Genode apps on Linux:
* The first thing to do is to interrupt Genode at a certain point as you
cannot start core with gdb. So, if you want to debug an application you
have to call 'wait_for_continue' from within your code.
Somewhere in your
93 matches
Mail list logo