Hi list!
Sebastian Bergmann schrieb:
iptables v1.2.8: can't initialize iptables table `filter': iptables who?
(do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
Any idea what's wrong?
I had the same problem! When I played around a bit with my
kernel-settings,
Prabhat Gupta wrote:
put
vga=ask
in grub configuration.
Loopingz wrote:
I'm a newbie on Gentoo, i've made the installation from stage 1,
compile everything and when i reboot the system, i see Grub then when
i choose to load the linux, it seems to load the kernel, but the
* edj (2003-07-15 03:31 +0200)
My machine is not sending localmail, i.e., error messages, cron junk,
etc, to root -- Sendmail: cannot open port 25.No wonder - I do
not have sendmail installed.
Sure you have. Try which sendmail.
I'd rather not install it. I have ssmtp, but my
Marius Mauch wrote:
When I set up my machine like that, on login my hostname is reported
as mymachine.(none).
Personally, I've put
my domainname in /etc/domainname and symlinked /etc/dnsdomainname and
/etc/nisdomainname to it.
Strange, but this does not work for me.
Instead, I added
#
Hello folks,
my mutt 1.5.4 does not accept german umlauts on the subjectline.
So I reecompiled mutt with --enable-locales-fix, but this does not
help. My locale's are correctly set to [EMAIL PROTECTED]
Umlauts on the console are working great.
My suggestion is, that gettext is the reason for
Brett I. Holcomb [EMAIL PROTECTED] writes:
Brett I. Holcomb [EMAIL PROTECTED] wrote:
You may need to unmount the system to do the repair.
Would that mean to start from a different Linux, e.g. from the
LiveCD? (Because it's the root file system; when unmounted, no more
programs)
Yes, it
Owen Gunden [EMAIL PROTECTED] writes:
emerge -u world *always* introduces potential for breakage. emergers
beware!
I think most of us are well aware of this, but it's certainly worth
pointing out again ;-)
To me, the issue is that emerge apache should emerge the version of
apache that
Hi,
I have a T-Sinus 130 data USB / Wireless LAN 802.11b network adapter
attached to my desktop box. One of the remaining issues keeping me from
switching that machine from Windows to Linux is to get that adapter
working under Linux.
Has anyone succeeded in getting this particular
On Tue, 15 Jul 2003, Sebastian Bergmann wrote:
I don't get an error message, but iwconfig does not show the device.
Any hint on getting this to work, preferably using the Live CD, would be
greatly appreciated.
did you tried to configure it via ifconfig or dhcpcd?
after adding the
With all this stuff moving to stable the last few days, my local mail
stopped working last night.
# sendmail
sendmail: fatal: gethostbyname: Bad file descriptor
# postfix check
postfix: fatal: gethostbyname: Success
(fatal Success - what is that?)
# cat /var/log/mail.err
Jul 15
Can Burak Cilingir wrote:
did you tried to configure it via ifconfig or dhcpcd?
No, because I don't see the interface, only the loaded modules via
lsmod.
--
Sebastian Bergmann
http://sebastian-bergmann.de/ http://phpOpenTracker.de/
Das Buch zu PHP 5:
On Mon, 14 Jul 2003, Phil Barnett wrote:
On Monday 14 July 2003 8:03 am, Jonathan C. wrote:
Hi all,
A few months ago I talked with some people on this list about
excessive caching on laptop computers. We could not find a
solution. Howevber, the title of the thread was cryptic, so I
On Mon, 14 Jul 2003, Owen Gunden wrote:
On Sun, Jul 13, 2003 at 11:43:41PM -0400, Sean Bossinger wrote:
When emerging gnome, I'm receiving an error message: all ebuilds that
could satisfy =media-libs/imlib2-1.0.7 have been masked. (dependency
required by
On Mon, 14 Jul 2003, Dhruba Bandopadhyay wrote:
Andrei Ivanov wrote:
emerge -uDp world
These are the packages that I would merge, in order:
Calculating world dependencies ...done!
[ebuildU ] app-editors/vim-core-6.2-r1 [6.1-r5]
emerge -uD world
world updated...
emerge -uDp
Jerry McBride [EMAIL PROTECTED] writes:
[ ... ]
A small thing ti consider also, the fastest production opteron is
only a 1.8gig chip. Wait till the xeon stompers come out this
fall...
clock frequency doesn't equal the ability to crunch numbers. on a
RISC, this would be a fair
On Tue, Jul 15, 2003 at 10:12:23AM +0200, Thorsten Kampe wrote:
* edj (2003-07-15 03:31 +0200)
My machine is not sending localmail, i.e., error messages, cron junk,
etc, to root -- Sendmail: cannot open port 25.No wonder - I do
not have sendmail installed.
Sure you have. Try which
Peter Ruskin wrote:
With all this stuff moving to stable the last few days, my local mail
stopped working last night.
# sendmail
sendmail: fatal: gethostbyname: Bad file descriptor
# postfix check
postfix: fatal: gethostbyname: Success
(fatal Success - what is that?)
# cat
Hi everyone,
On Tue, Jul 15, 2003 at 01:45:17PM +1000, Peter Stewart wrote:
I'm looking for recomendations for the purchase of a TV Tuner Card. I'm looking to
use the computer as a video recorder, so being able to achieve this under Gentoo
would be a priority as I don't realy want to do
hi all
I have a problem with maplayer lately. It used to work fine, but now when I try to
play a file it playes for a second then stops.
I can forward and reverse fine and it playes for a second then stops again
anybody seen this problem ?
--
Henti Smith
[EMAIL PROTECTED]
Senior
Shane Hickey wrote:
Well, I decided to go for it and migrate to apache2. Things are, for
the most part, looking good. I didn't read closely enough about
mod_perl, though, so I just decided to do without it for now. I was
only using it to speedup MRTG anyway.
But, I can't seem to get mailman to
begin quote
On Mon, 14 Jul 2003 12:10:19 +0300 (EEST)
Andrei Ivanov [EMAIL PROTECTED] wrote:
What can I do ?
update (the sourcecode of ) kvim, i think its that which ties vim to
the old version.
//Spider
--
begin .signature
This is a .signature virus! Please copy me into your
* [EMAIL PROTECTED] (2003-07-15 12:51 +0200)
On Tue, Jul 15, 2003 at 10:12:23AM +0200, Thorsten Kampe wrote:
* edj (2003-07-15 03:31 +0200)
My machine is not sending localmail, i.e., error messages, cron junk,
etc, to root -- Sendmail: cannot open port 25.No wonder - I do
not have
Lisa works perfectly, but how can I give names for all those IP's I see?
Thanx a lot. :o)
--
[EMAIL PROTECTED] mailing list
That's a good idea. I've done that on some of my systems
including one Gentoo. I haven't done it on others because
of the cabability of the LiveCD.
On Tue, 15 Jul 2003 10:57:23 +0200
Harald Arnesen [EMAIL PROTECTED] wrote:
Brett I. Holcomb [EMAIL PROTECTED] writes:
Brett I. Holcomb [EMAIL
On Tue, Jul 15, 2003 at 12:17:11PM +0200, Sebastian Bergmann wrote:
Can Burak Cilingir wrote:
did you tried to configure it via ifconfig or dhcpcd?
No, because I don't see the interface, only the loaded modules via
lsmod.
Hi,
I saw something about the T Sinus on the atmel-wlan-usb
On Tue, 2003-07-15 at 13:56, [EMAIL PROTECTED] wrote:
Lisa works perfectly, but how can I give names for all those IP's I see?
Thanx a lot. :o)
--
[EMAIL PROTECTED] mailing list
I think you will need a name-server for that, so that the lisa-daemon
can perform the required
Has anyone gotten this to work? It worked just fine with all the other
latest dev kernels, as well as the mm sources as well. I even took the
.config from .75 dev kernel with no luck.
anyone have any ideas how to get hyper threading to work on 2.6 test?
kev
--
[EMAIL PROTECTED] mailing list
When trying to emerge mozilla or mozilla-firebird the compilation
seg-faults.
Log from building mozilla-firebird:
./../../dist/bin/xpidl -m typelib -w -I ../../../dist/idl -I. -o
_xpidlgen/nsIPasswordManager nsIPasswordManager.idl
nsIPasswordManagerInternal.idl../../../dist/bin/xpidl -m typelib
sorry by the delay, I was out for a while.
No, it's not an official ebuild, it's an app-emacs from wiki, and the SRC_URI
specified was that from where I get the actual file, the same that I use to make
prozilla download it. I'm reinstalling all the stuff because the xfree stop to
work with
I'm using an AverTV card, nice and cheap and works well. Uses the bttv driver.
The only problem I had was getting the option to compile the bttv driver to
show up. After reading through the kernel docs I found out it requires I2O
device support to work.
On Jul 15, 2003 [13:45] +1000, Peter
On Tuesday 15 July 2003 13:32, Andrusky wrote:
I'm using an AverTV card, nice and cheap and works well. Uses the bttv
driver. The only problem I had was getting the option to compile the bttv
driver to show up. After reading through the kernel docs I found out it
requires I2O device support to
Hello!
Thomas Schweikle [EMAIL PROTECTED] writes:
on one system I have found lots of duplicate libs in /usr/lib:
-rw-r--r--1 root root 1303154 May 25 02:48
cracklib_dict.pwd
-rw-r--r--1 root root 1303154 May 25 02:48
cracklib_dict.pwd
[...]
there are 307
Shouldn't the scripts be running this when mounted as read-only? If it
can't be done in this traditional way, then reiserfs should not be
considered a production option forcing manual intervention with a boot
CD is simply not useful (even if it works).
Tom Veldhouse
- Original Message
Hi All,
It looks like my root partition is almost used. Is it possible to move
the portage tree to some other location?
Thanks
Prabhat
--
[EMAIL PROTECTED] mailing list
I'm preparing to build/test the new 2.6 kernel on my dual Athlon box. I'm
current running gentoo-sources 2.4.20-r5.
My question is this: In the past it's been noted on numerous occasions the
importance of having the link /usr/src/linux pointing to the current kernel
before configuration. Does
Hi
Am Montag, 14. Juli 2003 18:14 schrieb Thorsten Kampe:
Hi,
I want to start Zope on my one computer via xinetd. This is obviously
not as trivial as [1] as the startup scripts /etc/init.d/zope-2_6_1
and /etc/conf.d/zope-2_6_1 are rather long and complicated.
Does anyone know how to
I'm currently rather happily running a system on Adaptec 2400A ATA RAID.
This has so far not been a problem software-wise, at least not with 2.4.x
kernels.
With the release of kernel 2.6-beta, I decided to see if this new branch
would be anything for me. Unfortunately it doesn't seem to like
I am not sure how to identify if I have a p3 or p4 celeron, can you help
with that?
-Original Message-
From: Ted Goodridge, Jr [mailto:[EMAIL PROTECTED]
Sent: Monday, July 14, 2003 3:51 PM
To: Timo Boettcher
Cc: [EMAIL PROTECTED]
Subject: Re: [gentoo-user] stage3 tarball for a celeron
A
On some machines I have installed a very minimal Linux system on the
boot partition. Normally, this partition won't be mounted, but I have a
menu choice in grub which starts this rescue partition.
--
Hilsen Harald.
I really like this idea. Much faster than looking for the CD, and works
On Tue, 15 Jul 2003, [EMAIL PROTECTED] wrote:
I am not sure how to identify if I have a p3 or p4 celeron, can you help
with that?
'cat /proc/cpuinfo' should do the trick.
--
Marshal Newrock, Simon's Rock College of Bard
Caution: product may be hot after heating
--
[EMAIL PROTECTED] mailing
On July 15, 2003 10:02 am, Prabhat Gupta wrote:
It looks like my root partition is almost used. Is it possible to move
the portage tree to some other location?
i wouldn't suggest it personally. instead i'd suggest using the $DISTDIR
option in your make.conf file to tell portage to get its
do you have XMMS running?
On Tue, Jul 15, 2003 at 01:33:23PM +0200, Henti Smith wrote:
hi all
I have a problem with maplayer lately. It used to work fine, but now when I try to
play a file it playes for a second then stops.
I can forward and reverse fine and it playes for a second then
On 07/15/03 [EMAIL PROTECTED] wrote:
I am not sure how to identify if I have a p3 or p4 celeron, can you
help with that?
if it has = 1400 MHz it is a P3, if it has more it is P4 based.
Marius
--
[EMAIL PROTECTED] mailing list
On July 15, 2003 10:47 am, Prabhat Gupta wrote:
thanks Daniel.
Now the next question is how to download the sources in the
/mnt/share/copyleft/distfiles
when I update or install new packages?
they'll go there automatically, as long as make.conf has your $DISTDIR set
properly.
--
there
Bobby R. Cox wrote:
Hello,
Currently building a new mail server and I am trying to decide what IMAP
to use. I was seriously looking at courier-imap because it has pop3
built in.
SMTP is going to be Postfix. Any suggestions or comments?
Whenever this question has popped up (and it has a
Ricardo Nuno wrote:
hi,
i just got a dedicated 2mb upload/download so does the ISP say's
i'm paying really good money for this line.
Anyway the test's i make on the net the closes i get is 1773mb download
and 390 kbps upload, so or they are cheating me and making me pay for
something i dont got,
Hi All,
Did anyone make an ebuild for cinepaint
http://cinepaint.sourceforge.net/
--
P r a b h a t G u p t a
/\/\*
--
[EMAIL PROTECTED] mailing list
Hello,
I've finally got mailman working with apache2 and have created a new
list. However when I post to it I get the following error:
This is the Postfix program at host codewordt.co.uk.
I'm sorry to have to inform you that the message returned
below could not be delivered to one or more
Kurt V. Hindenburg wrote:
Just tried to boot into 2.6.0-test1 and it stops with
'Uncompressing ... booting now' (or whatever the line is)
and then it hangs there ;-(
Reading portage's warnings helps:
ewarn Also, note that you must compile in support for
ewarn input devices (Input
Sebastian Bergmann said the following on 7/15/2003 11:54 AM:
Kurt V. Hindenburg wrote:
Just tried to boot into 2.6.0-test1 and it stops with
'Uncompressing ... booting now' (or whatever the line is)
and then it hangs there ;-(
Reading portage's warnings helps:
ewarn Also, note that
On Tue, 2003-07-15 at 09:18, Ricardo Nuno wrote:
hi,
i just got a dedicated 2mb upload/download so does the ISP say's
i'm paying really good money for this line.
Anyway the test's i make on the net the closes i get is 1773mb download
and 390 kbps upload, so or they are cheating me and
Shane Hickey wrote:
On Tue, 15 Jul 2003 17:28:40 +0100
Dhruba Bandopadhyay [EMAIL PROTECTED] wrote:
How can I configure postfix so that it sends these mails correctly?
Or how can I solve this problem at all?
I had this problem and I actually submitted a bug report on it, but I
think that the
On Tue, Jul 15, 2003 at 12:44:14AM -0300, Carlos wrote:
It sounds like Paulo is looking for two-way sync, which rsync does not do.
Explore unison, that's more like what you're looking for.
What about a simple script that uses scp?
I suspect that after trying to think through exactly how
This isn't a cure for your problem.
rant
Over the several years running gentoo, I've seen more things screwed up
by 'emerge baselayout' than I care to remember. I always (and this is
no exception) let baselayout age a few months before adapting it.
/rant
With that machine, I tend to be
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tuesday 15 July 2003 11:06 am, Mark Renouf wrote:
Sebastian Bergmann said the following on 7/15/2003 11:54 AM:
Kurt V. Hindenburg wrote:
Just tried to boot into 2.6.0-test1 and it stops with
'Uncompressing ... booting now' (or whatever the
On Tue, Jul 15, 2003 at 02:58:19PM +0200, Patrick B?rjesson wrote:
When trying to emerge mozilla or mozilla-firebird the compilation
seg-faults.
This usually means you are having some hardware problems.
Owen
--
[EMAIL PROTECTED] mailing list
Owen Gunden wrote:
On Tue, Jul 15, 2003 at 02:58:19PM +0200, Patrick B?rjesson wrote:
When trying to emerge mozilla or mozilla-firebird the compilation
seg-faults.
This usually means you are having some hardware problems.
You could also try easing off your CFLAGS in make.conf. I've
had
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tuesday 15 July 2003 5:01 pm, Steve Fox wrote:
Hi,
I've upgraded to Apache 2.0.47, php 4.3.2 and mod_php 4.3.2-r3 and see
this error when I try to start apache:
Syntax error on line 84 of /etc/apache2/conf/apache2.conf:
Cannot load
Hi,
all, i dit today a emerge -U world, and got the new mysql, apache2, php and so on. At
first i thought all went fine, but i get no mail anymore.
Its getting pict up at my ISP with fetchmail, and from i can see from
/var/log/mail.info postfix is getting it, but its not getting deliverd
(reference header fixed manually. when starting a new thread,
please don't reply to an existing article.)
Tom Syroid [EMAIL PROTECTED] writes:
I'm preparing to build/test the new 2.6 kernel on my dual Athlon
box. I'm current running gentoo-sources 2.4.20-r5.
welcome to the club.
Henti Smith [EMAIL PROTECTED] writes:
I have a problem with maplayer lately. It used to work fine, but now
when I try to play a file it playes for a second then stops. I can
forward and reverse fine and it playes for a second then stops again
what output plugin are you using?
--
Terje
Did anyone solve this yet?
I messed up BIG time and unmerged baselayout on my desktop!
Mike
On Sunday 29 June 2003 02:22 am, Kenneth Karlsson wrote:
I have got the same problem with my compaq portable evo n1020v.
I dont have a solution and would really like to know what happened.
I also
At 15 July, 2003 Michael W. Holdeman wrote:
OK intrying to deal with the last baselayout update problems I
created, I took
my running gentoo 1.4 system and inadvertinately (I know this seems
impossible to do, and I deserve all the problems I have) dumped my
baselayout!. Now all I get is
Hi,
I don't know how to check things like masked packages yet, but there has
been a new alsa-driver package on CVS for a few weeks now. Is there and
ebuild for it? I'm not finding it yet.
If there is one, how would I get it? I'm using
emerge -p --deep world to look right now.
Thanks,
Mark
When trying to emerge mozilla or mozilla-firebird the compilation
seg-faults.
This usually means you are having some hardware problems.
Is there some way I can verify this? I've heard of some mem-testing
software but I've forgotten their names...
Patrick Börjesson
--
Public key id:
When trying to emerge mozilla or mozilla-firebird the compilation
seg-faults.
This usually means you are having some hardware problems.
You could also try easing off your CFLAGS in make.conf. I've
had aggressive builds of mozilla segfault. Easing up on the
CFLAGS got through
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Here's something scary...
Linux rachael.cn.net 2.6.0-test1 #2 Tue Jul 15 11:58:53 EST 2003 i686
AMD Duron(tm) processor AuthenticAMD GNU/Linux
Jul 15 12:50:57 [kernel] Badness in pci_find_subsys at
drivers/pci/search.c:132
Jul 15 12:50:58 [kernel]
* CrPy (2003-07-15 16:22 +0200)
Am Montag, 14. Juli 2003 18:14 schrieb Thorsten Kampe:
I want to start Zope on my one computer via xinetd. This is obviously
not as trivial as [1] as the startup scripts /etc/init.d/zope-2_6_1
and /etc/conf.d/zope-2_6_1 are rather long and complicated.
Does
On Tue, 15 Jul 2003 13:47:35 -0400
Michael W. Holdeman [EMAIL PROTECTED] wrote:
OK intrying to deal with the last baselayout update problems I
created, I took my running gentoo 1.4 system and inadvertinately (I
know this seems impossible to do, and I deserve all the problems I
have) dumped
Every few seconds something accesses my harddrive, therefore a suspend
(hdparm -S1 /dev/hda) is impossible. I have a notebook, so I would really
like to spin down the drive for less heat, noise and a longer battery life.
I suspect the filesystem reiserfs to do these annoying accesses. It is a
Anyone else having segmentation faults while using Evolution 1.4.3?
Mostly while using the 'contacts' but also in the 'calendar' and
'tasks'. Don't think I have had any while just checking email.
But ever since I have used Evolution (under RedHat and Gentoo), the
'contacts' have always generated
On Tuesday 15 July 2003 13:00, Patrick Börjesson wrote:
When trying to emerge mozilla or mozilla-firebird the compilation
seg-faults.
This usually means you are having some hardware problems.
Is there some way I can verify this? I've heard of some mem-testing
software but I've
On Tuesday 15 July 2003 17:47, Michael W. Holdeman wrote:
OK intrying to deal with the last baselayout update problems I created, I
took my running gentoo 1.4 system and inadvertinately (I know this seems
impossible to do, and I deserve all the problems I have) dumped my
baselayout!. Now all
First off, I'll apologise if this has already been covered.
For some reason, mod_php-4.3.2-r3 fails to build. I don't use java so that's
not the problem. The error I get is:
configure: error: can not run test program while cross compiling
!!! ERROR: dev-php/mod_php-4.3.2-r3 failed.
!!! Function
Yeah, i have the same problem too.
Andrew Dacey wrote:
First off, I'll apologise if this has already been covered.
For some reason, mod_php-4.3.2-r3 fails to build. I don't use java so that's
not the problem. The error I get is:
configure: error: can not run test program while cross compiling
Hello,
Am Dienstag, 15. Juli 2003 19:59 schrieb Mark Knecht:
Hi,
I don't know how to check things like masked packages yet, but there has
been a new alsa-driver package on CVS for a few weeks now. Is there and
ebuild for it? I'm not finding it yet.
Yes, there is a ebuild for alsa-0.9.5 in
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tuesday 15 July 2003 13:22, Andrew Dacey wrote:
First off, I'll apologise if this has already been covered.
For some reason, mod_php-4.3.2-r3 fails to build. I don't use java so
that's not the problem. The error I get is:
configure: error:
[quote]
OK intrying to deal with the last baselayout update problems I created, I took
my running gentoo 1.4 system and inadvertinately (I know this seems
impossible to do, and I deserve all the problems I have) dumped my
baselayout!. Now all I get isinit # when booting. I tried to mount
Every few seconds something accesses my harddrive, therefore a suspend
(hdparm -S1 /dev/hda) is impossible. I have a notebook, so I
would really
like to spin down the drive for less heat, noise and a longer
battery life.
I suspect the filesystem reiserfs to do these annoying
accesses. It is a
I was installing PHP andemerge start to
compile QT. And he made on error while compiling QT, qt is a graphical library
why does php requires it
Loopingz
begin quote
On Tue, 15 Jul 2003 10:02:51 -0400
Prabhat Gupta [EMAIL PROTECTED] wrote:
Hi All,
It looks like my root partition is almost used. Is it possible to move
the portage tree to some other location?
Yep, there is:
mv /usr/portage /mnt/bigdisk/portage
ln -s /mnt/bigdisk/portage
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tuesday 15 July 2003 6:47 pm, Loopingz wrote:
I was installing PHP and emerge start to compile QT. And he made on error
while compiling QT, qt is a graphical library why does php requires it
PHP has many functions used manipulate images, if
begin quote
On Tue, 15 Jul 2003 13:47:35 -0400
Michael W. Holdeman [EMAIL PROTECTED] wrote:
OK intrying to deal with the last baselayout update problems I
created, I took my running gentoo 1.4 system and inadvertinately (I
know this seems impossible to do, and I deserve all the problems I
That's cool :)
Spider wrote:
begin quote
On Tue, 15 Jul 2003 10:02:51 -0400
Prabhat Gupta [EMAIL PROTECTED] wrote:
Hi All,
It looks like my root partition is almost used. Is it possible to move
the portage tree to some other location?
Yep, there is:
mv /usr/portage
Not necessarily. If the legacy /dev entries got nuked, you'll need to
mount your filesystems manually with the devfs names.
Example:
mount -t reiserfs /dev/ide/host0/bus0/target0/lun0/part3 /usr
and such. Unfortunately, dev entries aren't protected by portage, so if
devfsd isn't setup to
Thanx Andrew,
the problem was libwww, i remerge this package
Take a look on this link:
http://forums.gentoo.org/viewtopic.php?t=66626highlight=run+test+program+programme+while+cross+compiling
LM
Andrew Dacey wrote:
First off, I'll apologise if this has already been covered.
For some
Ricardo Nuno [EMAIL PROTECTED] writes:
can you be more specific?
hm, I though we'd have an ebuild for it, sorry.
what is TTCP and here can i get it.
TTCP (Test TCP) has become more a concept than a single application
these days. the basic idea is that you put up a sender and a
Spider [EMAIL PROTECTED] writes:
[ ... ]
boot with init=/bin/sash
very sound advice, and thank you Gentoo for having /bin/sash
installed by default. :-)
mount -o remount,rw /
you probably want to run 'devfsd' at this stage.
mount /usr/
emerge baselayout
if mount fails,
Kurt V. Hindenburg [EMAIL PROTECTED] writes:
Here's something scary...
Linux rachael.cn.net 2.6.0-test1 #2 Tue Jul 15 11:58:53 EST 2003 i686
AMD Duron(tm) processor AuthenticAMD GNU/Linux
Jul 15 12:50:57 [kernel] Badness in pci_find_subsys at
drivers/pci/search.c:132
Jul 15 12:50:58
Is there no longer support for Davicom NICs using the dmfe driver? I
can't seem to find it anywhere in menuconfig. I even searched through
the .config and can't seem to find anything in the net section that has
anything to do with it.
--
Andrew Gaffney
--
[EMAIL PROTECTED] mailing list
On Tuesday 15 July 2003 13:15, Martin Gramatke wrote this in an attempt
to be witty and informative:
Every few seconds something accesses my harddrive, therefore a
suspend (hdparm -S1 /dev/hda) is impossible. I have a notebook, so I
would really like to spin down the drive for less heat, noise
Michael W. Holdeman [EMAIL PROTECTED] writes:
Did anyone solve this yet?
I messed up BIG time and unmerged baselayout on my desktop!
this shouldn't be such a big deal? boot from the installation CD,
mount your installation under /mnt/gentoo as usual, and chroot to
/mnt/gentoo.
Citando Collins Richey [EMAIL PROTECTED]:
On Mon, 14 Jul 2003 09:33:17 -0500
Ian Truelsen [EMAIL PROTECTED] wrote:
On Mon, 14 Jul 2003 05:21:43 -0600
Collins Richey [EMAIL PROTECTED] wrote:
On Sun, 13 Jul 2003 22:28:21 -0500
Ian Truelsen [EMAIL PROTECTED] wrote:
Andrew Gaffney [EMAIL PROTECTED] writes:
Is there no longer support for Davicom NICs using the dmfe driver? I
can't seem to find it anywhere in menuconfig. I even searched
through the .config and can't seem to find anything in the net
section that has anything to do with it.
since Davicom
Terje Kvernes wrote:
Andrew Gaffney [EMAIL PROTECTED] writes:
Is there no longer support for Davicom NICs using the dmfe driver? I
can't seem to find it anywhere in menuconfig. I even searched
through the .config and can't seem to find anything in the net
section that has anything to do with it.
I think a ACCEPT_KEYWORDS=~86 emerge -p alsa-driver would do the trick.
You can always look in /usr/portage/category/package to see,
if there are
updates to packages you are interested in.
Michael,
Thanks very much. That does work and it is found. My tired brain is not
adjusting well to
- Original Message -
From: Luis Morales [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, July 15, 2003 4:14 PM
Subject: Re: [gentoo-user] Can't emerge mod_php-4.3.2-r3
Thanx Andrew,
the problem was libwww, i remerge this package
Take a look on this link:
Definitely. One popular choice (my own favorite) is postfix. The default
configuration requires just a few small edits to one configuration file -
very easy to setup and use.
emerge postfix
edit /etc/postfix/main.cf
/etc/init.d/postfix start
Error: could not get dependency info for postfix
I have the same error starting up through new init scripts started by
packages, but they start up anyway for me. Are you sure postfix isn't
running?
On Tue, 2003-07-15 at 17:24, MIKE MacMartin wrote:
Definitely. One popular choice (my own favorite) is postfix. The default
configuration
On July 15, 2003 05:22 pm, Bryan D. Stine wrote:
I have the same error starting up through new init scripts started by
packages, but they start up anyway for me. Are you sure postfix isn't
running?
It won't let me stop it. I just checked and it is not started
MIKE
--
Beware the JabberOrk
1 - 100 of 115 matches
Mail list logo