On 10/15/2010 12:23 PM, Mike Diehl wrote:
On Friday 15 October 2010 11:40:34 am Florian Philipp wrote:
Am 15.10.2010 19:29, schrieb Mike Diehl:
Hi all.
I've never had this much trouble with a server before, but I've been
pulling my hair out.
The install seemed to go well, but when I
On 10/08/2010 03:36 PM, Maciej Grela wrote:
2010/10/8 Mick michaelkintz...@gmail.com:
I want to install MSWindows in a VM. I want to be able to use the guest
MSWindows OS to connect to a website run on apache on the Gentoo host OS on
the same machine.
What is the recommended network
On 10/04/2010 10:49 PM, Walter Dnes wrote:
On Thu, Sep 30, 2010 at 12:37:10PM -0700, walt wrote
On 09/30/2010 05:30 AM, Mark David Dumlao wrote:
On Thu, Sep 30, 2010 at 8:00 PM, Johannes Kimmeljohannes.kim...@gmx.de
wrote:
On 09/30/2010 12:58 PM, Mark David Dumlao wrote:
Heya,
I noticed
On 09/30/10 20:07, Christopher Koeber wrote:
Hello,
I have a system with two network cards. The cards are configured for
DHCP for two separate networks and they get their respective IP
addresses from the different DCHP servers.
The problem is that the network access on Ieither/I network
On 09/28/10 05:58, James wrote:
Mark Knecht markknecht at gmail.com writes:
I'm curious if there's a way to capture the exact set of command
that my machine executes as it boots up.
Hello Mark,
maybe 'app-admin/showconsole', is a good (quick) place to
start by logging console output
On 09/24/10 05:38, dhk wrote:
On 09/24/2010 07:06 AM, Albert Hopkins wrote:
On Fri, 2010-09-24 at 06:47 -0400, dhk wrote:
After a recent xorg upgrade my display hasn't been quite right. It's
all usable, but it looks like the resolution is wrong. The resolution
is now set at the highest
On 09/24/10 09:48, Kevin O'Gorman wrote:
On Tue, Sep 21, 2010 at 3:23 PM, Beau Henderson b...@thehenderson.com
mailto:b...@thehenderson.com wrote:
On 09/22/10 07:31, Peter Humphrey wrote:
On Monday 20 September 2010 16:38:05 Paul Hartman wrote:
I haven't had any
On 09/24/10 09:56, Kevin O'Gorman wrote:
On Fri, Sep 24, 2010 at 9:51 AM, Bill Longman bill.long...@gmail.com
mailto:bill.long...@gmail.com wrote:
On 09/24/10 09:48, Kevin O'Gorman wrote:
On Tue, Sep 21, 2010 at 3:23 PM, Beau Henderson
b...@thehenderson.com mailto:b
On 09/22/10 16:40, me wrote:
On Wed, Sep 22, 2010 at 7:00 PM, Bill Longman bill.long...@gmail.com wrote:
I have a new workstation running 64 bits 2.6.34 gentoo sources. It's an
HP p6520y (AthlonIIX4) with 6GB and lsusb reports an Alcor Micro 21-in-1
Flash Card Reader.
I have no usb storage
: -- code: 0xf0, key: 0x2, ASC: 0x3a, ASCQ: 0x0
usb-storage: Not Ready: Medium not present
usb-storage: scsi cmd done, result=0x2
usb-storage: *** thread sleeping.
Any ideas who/what is doing this? How to debug?
Bill
--
Bill Longman
Εν αρχη ην ο λογος
On 09/17/2010 12:01 PM, Volker Armin Hemmann wrote:
On Friday 17 September 2010, Nils Larsson wrote:
fredag 17 september 2010 05.21.42 skrev meino.cra...@gmx.de:
Hi,
short question:
My PC runs a AMD Phenom II X6 1090T (E0 stepping, Black Edition).
cat /proc/cpuinfo claims, that the
under 64bit. Rendering becomes 30% faster!
Oh yeah! ;)
Best regards,
mcc
So, in the long run, would you say you saved any time? How fast can you
install fresh 64 bit gentoo compared to your hop-step-jump that you did? I'd
be interested to know.
--
Bill Longman
On 09/13/2010 12:33 PM, meino.cra...@gmx.de wrote:
Paul Hartman paul.hartman+gen...@gmail.com [10-09-13 21:27]:
On Sat, Sep 11, 2010 at 12:15 AM, meino.cra...@gmx.de wrote:
On the Inet I found some, but not very clear infos, which say, that
the temperature sensing diodes of the AMD Phenom
it, too, when testing the kernel before I do it for real.
This way, the code stays owned by root and I can make to my hearts content,
with different kernels going into different directories that I control.
--
Bill Longman
post a grub.conf file that uses labels? Sort of a example to look
at and go by.
Dale, there are two examples of fstabs in this message (actually three). But
you only want to see those you didn't write. You just need to put
LABEL=somelabel in the first column.
--
Bill Longman
keyboards on my desk - one for the Sun
box and the other on the KVM for the Linux boxes. Innumerable times I've
wondered why my screensaver password never got accepted. Until I realized I
was on the wrong keyboard.
Thanks for the grin, Allan.
--
Bill Longman
I have a broken Firefox-3 reference in my KDE favorites menu. Is there a
tool to fix these broken items because I haven't found one.
--
Bill Longman
Εν αρχη ην ο λογος
On 08/27/2010 01:10 AM, J. Roeleveld wrote:
On Friday 27 August 2010 09:49:41 Nikos Chantziaras wrote:
Anyway, make sure you have a bootable Linux CD/DVD handy. That way, you
won't be able to blow anything up and can boot from it in order to
change your /etc/fstab and grub conf.
On 08/27/2010 12:58 AM, Konstantinos Agouros wrote:
Hi,
I am currently running a guest with VMware-Server-1. However the modules
needed for that on the host are no longer supported and I am stuck with 2.6.31
for the moment.
So I am thinking of alternatives. My requirements:
It should
On 08/27/2010 09:10 AM, J. Roeleveld wrote:
On Friday 27 August 2010 18:03:51 Bill Longman wrote:
On 08/27/2010 01:50 AM, Nikos Chantziaras wrote:
On 08/27/2010 10:37 AM, Dale wrote:
Snipped
Yet another way to use labels:
When you make the filesystem, apply the name then i.e
On 08/27/2010 01:50 AM, Nikos Chantziaras wrote:
On 08/27/2010 10:37 AM, Dale wrote:
I been putting this off but it looks like the newer kernels are going to
push me to changing this real soon. I have a older system, Abit NF7 2.0
motherboard with the older IDE drives. I'm still using the older
On 08/27/2010 09:06 AM, Nikos Chantziaras wrote:
On 08/27/2010 07:02 PM, J. Roeleveld wrote:
Actually, you can:
http://www.ibm.com/developerworks/linux/library/l-boot-rootfs/index.html
And this is similar to the syntax in the kernel's
Documentation/intel_txt.txt file.
(Read the section below
On 08/27/2010 09:06 AM, Nikos Chantziaras wrote:
On 08/27/2010 07:02 PM, J. Roeleveld wrote:
On Friday 27 August 2010 17:57:01 Bill Longman wrote:
On 08/27/2010 01:10 AM, J. Roeleveld wrote:
On Friday 27 August 2010 09:49:41 Nikos Chantziaras wrote:
Anyway, make sure you have a bootable Linux
On 08/25/2010 01:40 PM, Robert Bridge wrote:
On Wed, Aug 25, 2010 at 8:33 PM, Kevin O'Gorman kogor...@gmail.com wrote:
Sorry, but that has several bits of misinformation.
xdm is not a generic term, or at least I didn't mean it that way. It's the
package x11-apps/xdm.
Gentoo uses the term
On 08/26/2010 06:07 AM, Aaron Bauman wrote:
All,
I bought a new Toshiba T215D-S1150 with a AMD Athlon II Neo
Processor. I am currently having issues with the livecd not booting.
Everything seems to get stuck on an NeT RPC error while the kernel is
booting. I was able to successfully
On 08/24/2010 03:17 PM, tpar...@etherstorm.net wrote:
On 8/24/2010 5:45 PM, Zeerak Mustafa Waseem wrote:
A good idea might be to install the package app-portage/eix. It allows
you to, amongst other things, to search for packages in case you're
uncertain about a package name. The search will
On 08/24/2010 08:36 PM, Kevin O'Gorman wrote:
In order to make progress on this thing, it's useful to be able to
control the display manager. My problem has been that going to /etc/init.d
and commanding ./xdm stop seems to work, but has no effect on KDE.
Manually killing kde (ps -ef | grep
On Mon, Aug 23, 2010 at 7:27 PM, Kevin O'Gorman kogor...@gmail.com wrote:
I had to replace an 4:3 Westinghouse monitor this weekend. I got a new
ASUS VH242H, which is very wide. But Xorg is still running 1280x1024,
instead of the monitor's normal 1920x1080, according to xorg logs because of
On 08/19/2010 04:38 PM, Peter Humphrey wrote:
On Thursday 19 August 2010 21:21:20 Kevin O'Gorman wrote:
So I looked up auto-hinter in the flagedit(1) program. It says:
auto-hinter: Local Flag: Use the unpatented auto-hinter instead
of the (recommended) TrueType bytecode interpreter (media-
On 08/19/2010 08:44 AM, Florian Philipp wrote:
Am 18.08.2010 21:30, schrieb Elmar Hinz:
1.) Is there a Map: modules to configration parameters?
lspci -k lists me all modules of the running genkernel.
Unfortunately the configuration parameters of the kernel have
different names.
2.) Which
On 08/20/2010 07:58 AM, Peter Humphrey wrote:
On Friday 20 August 2010 14:20:35 Bill Longman wrote:
On 08/19/2010 04:38 PM, Peter Humphrey wrote:
On Thursday 19 August 2010 21:21:20 Kevin O'Gorman wrote:
So I looked up auto-hinter in the flagedit(1) program. It says:
auto-hinter: Local Flag
On 08/20/2010 11:44 AM, Marc Joliet wrote:
Am Fri, 20 Aug 2010 07:43:40 -0700
schrieb Bill Longman bill.long...@gmail.com:
[...]
I find it amazing, though, that even if I copy my old .config, it still
takes me so much time to make sure all the settings are correct for a
given machine
On 08/19/2010 05:37 AM, Florian CROUZAT wrote:
On 19 août 2010, at 14:27, Graham Murray wrote:
Elmar Hinz oss.el...@googlemail.com writes:
2010/8/18 Alan McKinnon alan.mckin...@gmail.com:
Apparently, though unproven, at 23:25 on Wednesday 18 August 2010, Elmar
Hinz
did opine thusly:
On 08/19/2010 06:53 AM, Elmar Hinz wrote:
2010/8/19 Andrea Conti a...@alyf.net:
On the other hand LINGUAS is still a general variable AFAIK and not
portage specific.
LINGUAS is strictly portage-specific.
Really?
Researching the web I understand it origins from gettext and portage
has
On 08/19/2010 04:37 AM, Walter Dnes wrote:
On Mon, Aug 16, 2010 at 05:55:04PM -0500, Paul Hartman wrote
I had a similar message, it was there because of the fact that i
specified the wrong (or failed to specify?) mtrr method in my kernel
boot parameters for the framebuffer. I'm using uvesafb
On 08/17/2010 04:38 PM, walt wrote:
Well, not quite true. I did change my /etc/fstab, but I'm now using disk
labels in fstab instead of device names. If you still use device names
you'll need to change /dev/hd* to /dev/sd* in fstab when using the new
disk drivers.
I'm an old-timer with *nix
On 08/18/2010 04:53 AM, Nganon wrote:
I did not know that. I was thinking of, in couple of months, buying a
notebook
with two HDDs with RAID1 installed and using the usb drive as a backup
destination. So if RAID got corruped, the backups, made since then,
would be
useless? How would you
On 08/18/2010 11:03 AM, Nganon wrote:
Clear now, thanks.
If you want a robust filesystem, look into ZFS/BTRFS.
AFAIK ZFS is unmaintained and BTRFS is not stable, am I wrong?
Not really. ZFS is only available on Solaris right now. I seem to
remember it was running on one of the
On 08/18/2010 11:49 AM, Joerg Schilling wrote:
Bill Longman bill.long...@gmail.com wrote:
On 08/18/2010 11:03 AM, Nganon wrote:
Clear now, thanks.
If you want a robust filesystem, look into ZFS/BTRFS.
AFAIK ZFS is unmaintained and BTRFS is not stable, am I wrong?
Why do you
On 08/17/2010 03:57 AM, Elmar Hinz wrote:
I am new in Gentoo. I installed Gnome.
Portage: 1,6 GB + Rest: 5,5 GB = 7,1 GB
Sorry:
Portage: 1,6 GB + Rest: 3,5 GB = 5,1 GB
I guess to best answer this question you need to ask what you want to
do. What are you trying to speed up? Booting?
On 08/17/2010 10:56 AM, Albert Hopkins wrote:
On Tue, 2010-08-17 at 19:20 +0200, meino.cra...@gmx.de wrote:
Hi,
on YouTube there was a Blender-2.5 tutorial with audio.
There was an interesting detail: While there were spoken
instructions one can hear one typing on its keyboard.
Each
On 08/17/2010 06:43 AM, Mike Edenfield wrote:
On 8/16/2010 2:13 PM, Stéphane Guedon wrote:
I have read several things about this, but never really solved !
Can I emerge a 32bits software on 64bits platform with a multilib profile ?
All my web browsers (konqueror, opera, chromium, firefox)
On 08/17/2010 02:44 PM, Mick wrote:
On Tuesday 17 August 2010 20:34:05 Albert Hopkins wrote:
On Tue, 2010-08-17 at 20:43 +0200, meino.cra...@gmx.de wrote:
Bill Longman bill.long...@gmail.com [10-08-17 20:16]:
On 08/17/2010 10:56 AM, Albert Hopkins wrote:
On Tue, 2010-08-17 at 19:20 +0200
On 08/14/2010 12:32 PM, Jarry wrote:
On 13. 8. 2010 21:05, Enrico Weigelt wrote:
* Bill Longmanbill.long...@gmail.com wrote:
Basically just run VMWare/Virtualbox etc and put the services in there.
well, these solutions are way bigger (iow: more resource
intensive), since they run a
On 08/15/2010 01:11 AM, Adam Carter wrote:
why backup mbr? installing grub takes less time then the backup and
restore of
the mbr.
And dd for backups? Why wasting space? Why suffering from problems
when the new
harddisk has a different size?
Just tar up
On 08/15/2010 05:32 PM, Daniel D Jones wrote:
On Sunday, August 15, 2010 12:45:06 Marc Joliet wrote:
Am Sun, 15 Aug 2010 12:15:57 -0400
schrieb Daniel D Jones ddjo...@riddlemaster.org:
Is there any way to run genkernel without it running the oldconfig
command? I can work around the issue by
On 08/15/2010 08:02 PM, Kevin O'Gorman wrote:
My underling thing, if anyone can make other suggestions, is that my
camera broke, and I had to get
one in a hurry, and didn't really know what to look for. I wound up
with a fairly good Sanyo 1080p camera
and video recorder that's super light,
On 08/15/2010 09:07 PM, James wrote:
Stroller stroller at stellar.eclipse.co.uk writes:
So what happens when you try `sudo mount -v /dev/sr0 /mnt/cdrom/`?
mount -v /dev/sr0 /mnt/cdrom/
mount: you didn't specify a filesystem type for /dev/sr0
I will try all types mentioned in
On 08/16/2010 02:57 AM, Alan McKinnon wrote:
lots of good stuff snipped
Which all goes to say you should resist the creation of any such lookup tool
with every fibre of your being :-)
Alan, if I ever get near your part of your continent, I'm going to buy
you a beer
On 08/16/2010 09:07 AM, Jarry wrote:
On 16. 8. 2010 17:29, Mark Knecht wrote:
On Mon, Aug 16, 2010 at 7:16 AM, Bill Longmanbill.long...@gmail.com:
That is why I picked up Linux-VServer (actually, first I tried
OpenVZ but could not make it run). It is a kind of compromise,
where all guests
On 08/16/2010 12:47 PM, Stéphane Guedon wrote:
nspluginwrapper currently doesn't allow flash player to work, don't know
why...
You could look at swfdec-gnome too.
On 08/16/2010 02:29 PM, Mark Knecht wrote:
Hi all,
I know nothing about this sort of stuff so I don't know where to
even start looking. Thanks in advance for any pointers.
Here's the setup: My desktop machine is a new, fast Core i7 980x
processor. It is capable of doing emerge -e
On 08/13/2010 07:09 AM, Tamer Higazi wrote:
Hi people!
I am in front of a disaster updating my gentoo system. Now the system
is shot, and I am not capable starting the gnome-manager:
at the end it says only:
checking Pango flags... configure: error:
*** Pango not found. Pango built with
On 08/13/2010 08:22 AM, Tamer Higazi wrote:
As you told me I merged lafilefixer and ran lafilefixer --justfixit
then I executed revdep-rebuild which wants to remerge a huge amout of
packages who because libpangocairo-1.0.so.0 was missing, or couldn't
be linked at the end, revdep-rebuild
On 08/13/2010 10:58 AM, BRM wrote:
- Original Message
On 13 August 2010 09:08, Neil Bothwick n...@digimed.co.uk wrote:
On Thu, 12 Aug 2010 22:10:02 -0700 (PDT), BRM wrote:
but even so - they are saying this has to be done on every reboot, and
that's not much of a solution.
Put
On 08/11/2010 07:37 PM, James wrote:
Baseline- I'm lazy and not very smart:
So my console output upon booting berated me
about continuing to use sysfs. OK. So I removed
it and built a new kernel (AMD 64).
Everything works but the DVD. Ok, so
I need a udev rule to fix it? Googling
has
snip
What's different between my root environment and the one in which cron
runs (with respect to ruby and its gems)? Where should I start looking?
No direct answer, sorry, Michael.
You might want to use:
/bin/bash -l -x -c /root/src/mailshears/bin/mailshears
to at least help debug it.
On 08/11/2010 01:30 PM, Alan McKinnon wrote:
I refuse to implement password expiration policies and have a vast array of
literature to back me up when some dimwit damager gets on his expiration high
horse.
My users pick their own passwords - I present a list of 5 from apg and let
them
On Wed, Aug 11, 2010 at 4:09 PM, Alan McKinnon alan.mckin...@gmail.comwrote:
On Thursday 12 August 2010 00:11:12 Bill Longman wrote:
On 08/11/2010 01:30 PM, Alan McKinnon wrote:
I refuse to implement password expiration policies and have a vast
array
of literature to back me up when
On 08/10/2010 02:06 PM, Jarry wrote:
Hi,
I am facing this problem: I have subdirectory, let's say
/some/dir. I would like to create some kind of dynamic
and preliminary link, so that any future subdirectories,
created later in /some will in fact be links, pointing to
/some/dir.
So if
On 08/09/2010 01:08 PM, Robert Bridge wrote:
On Mon, Aug 9, 2010 at 8:09 PM, Mick michaelkintz...@gmail.com wrote:
There have been discussions on this list why sudo is a bad idea and sudo on
*any* command is an even worse idea. You might as well be running everything
as root, right?
sudo
On Sun, Aug 8, 2010 at 1:01 PM, Manuel Klemenz m.klem...@gmx.at wrote:
On Sunday 08 August 2010 20:21:13 CJoeB wrote:
Hi,
I'm getting better recently updated to KDE 4.4 - 200+ packages that
needed to be updated (including those that weren't KDE apps) and I had a
bit of jumping
On 08/04/2010 12:15 AM, Chen Huan wrote:
Hi,everybody, I got a very very strange problems.
I have install gnome, and when I try to add xdm to default runlevel, use
command rc-update add xdm default, it is normal
and output of rc-update show is right
but when I restart computer, the xdm
On 08/03/2010 09:20 AM, Valmor de Almeida wrote:
Hello,
After a recent sync and new kernel built, I get these messages from
fdisk -l that did not use to get before. Searching the web, it appears
that fdisk is listing my LVM partitions. Why is it doing now? It has
never done it before.
On 08/03/2010 02:16 PM, pk wrote:
On 2010-08-03 18:20, Valmor de Almeida wrote:
fdisk -l
Disk /dev/dm-0 doesn't contain a valid partition table
Why are you using fdisk on a logical volume? To my knowledge (which of
course may be outdated/wrong) an LV doesn't contain a partition table so
On 08/02/2010 01:02 PM, pk wrote:
On 2010-08-02 17:49, Bill Longman wrote:
I just saw, this weekend in fact, that the newer Phenoms, in fact most
of the recent K10 CPUs, do not work accurately with the atk0110 so when
the driver starts to load, it flatly refuses. I have a 9750 Phenom
On 08/01/2010 07:51 AM, Xi Shen wrote:
thanks a lot. i am using asus mb, and asus_atk0110 works for me too. :)
On Sun, Aug 1, 2010 at 7:52 PM, pk pete...@coolmail.se wrote:
On 2010-08-01 11:01, Xi Shen wrote:
Aug 1 16:56:03 david-gentoo kernel: [ 715.671669] ACPI: If an ACPI
driver is
On 08/02/2010 01:02 PM, pk wrote:
On 2010-08-02 17:49, Bill Longman wrote:
I just saw, this weekend in fact, that the newer Phenoms, in fact most
of the recent K10 CPUs, do not work accurately with the atk0110 so when
the driver starts to load, it flatly refuses. I have a 9750 Phenom
and then unregistering the whole set again. I can kill kglobalaccel and it
stops the printout, but I still get the weird linefeed when I use the right
control key in a terminal.
--
Bill Longman
On 07/29/2010 08:58 PM, Walter Dnes wrote:
2) If you really really need the X-integration features, you can use the
xhost command to enable all users on your machine to run X apps on
your X session. E.g. my machine is 192.168.123.249 so I ran...
xhost +192.168.123.249
...to allow a
On 07/30/2010 04:57 AM, Mark David Dumlao wrote:
diff between the eix --dump of my PC and the server
===
madum...@trixie ~ $ diff -Naur PC server
--- PC2010-07-30 19:54:38.0 +0800
+++ server2010-07-30 19:55:05.0 +0800
@@ -126,7 +126,7 @@
# STRING
# The
On 07/30/2010 07:46 AM, Mark David Dumlao wrote:
On Fri, Jul 30, 2010 at 9:47 PM, Bill Longman bill.long...@gmail.com wrote:
What does eselect profile list show you on both hosts?
home PC
madum...@trixie ~ $ eselect profile list
Available profile symlink targets:
[1] default/linux/amd64
On 07/30/2010 09:26 AM, Mark David Dumlao wrote:
On Fri, Jul 30, 2010 at 11:51 PM, Bill Longman bill.long...@gmail.com wrote:
The profile affects the default USE settings. This is a very important
Gentoo concept.
emerge --info eix on both machines:
PC:
app-portage/eix-0.20.5 was built
On 07/28/2010 06:42 AM, Mick wrote:
On 28 July 2010 09:50, KH gentoo-u...@konstantinhansen.de wrote:
I installed grub by connecting the hdd to my workstation. This did not
change anything.
Also I changed /etc/fstab . Now I have 0 0 for every partition. The pc
boots fine now. I can use it
On 07/28/2010 07:04 AM, Mick wrote:
On 28 July 2010 14:53, Bill Longman bill.long...@gmail.com wrote:
On 07/28/2010 06:42 AM, Mick wrote:
On 28 July 2010 09:50, KH gentoo-u...@konstantinhansen.de wrote:
I installed grub by connecting the hdd to my workstation. This did not
change anything
On 07/28/2010 07:56 AM, KH wrote:
Am 28.07.2010 15:45, schrieb Bill Longman:
On 07/28/2010 01:50 AM, KH wrote:
Hi,
I installed grub by connecting the hdd to my workstation. This did not
change anything.
Also I changed /etc/fstab . Now I have 0 0 for every partition. The pc
boots fine now
On 07/28/2010 08:18 AM, KH wrote:
Am 28.07.2010 16:04, schrieb Mick:
On 28 July 2010 14:53, Bill Longman bill.long...@gmail.com wrote:
On 07/28/2010 06:42 AM, Mick wrote:
On 28 July 2010 09:50, KH gentoo-u...@konstantinhansen.de wrote:
I installed grub by connecting the hdd to my workstation
On 07/28/2010 09:37 AM, KH wrote:
Am 28.07.2010 17:27, schrieb Bill Longman:
On 07/28/2010 07:56 AM, KH wrote:
Am 28.07.2010 15:45, schrieb Bill Longman:
Konstantin, please post what your kernel has for IDE support. If you
have /proc/config.gz, then please post the results from zgrep IDE
On 07/28/2010 11:54 AM, Mick wrote:
On Wednesday 28 July 2010 17:35:44 KH wrote:
Am 28.07.2010 17:30, schrieb Bill Longman:
On 07/28/2010 08:18 AM, KH wrote:
Hi Mick,
but typing ls /dev/hd* or ls /dev/sd* should show up something.
Shouldn't it? df -h shows /dev/hda3 is mounted on /
For me
On 07/28/2010 01:52 PM, Alan McKinnon wrote:
On Wednesday 28 July 2010 22:20:17 Andrey Vul wrote:
Creating files in /tmp, /etc, /lib32, and /var return ENOENT (touch
/tmp/foo = strerror(ENOENT)).
However, this is done as root and the dirs are marked 755 root:root.
df -i shows only 2% inode
.
I'm pretty sure the menu is the same for both. Then again, I have updated
KDE a couple times since then too.
Dale
:-) :-)
I see it on the new version (KDE 4).
--
Bill Longman
On 7/22/10, Arnau Bria ar...@emergetux.net wrote:
On Thu, 22 Jul 2010 10:53:54 +0200
Alan McKinnon wrote:
On Thursday 22 July 2010 10:04:46 Arnau Bria wrote:
Hi all,
long time since last update. I was trying to update my system and it
failed at netpbm with this error:
Yes, I can see
On 07/22/2010 01:09 AM, Alan McKinnon wrote:
Looks like a quad cpu, each one dual core. I've got one of those in the Data
Centre next door and each core is running that new fancy hyper-threading that
actually works:
It's quad CPU TWELVE core. Just putting four CPUs into the thing will
cost a
On 07/22/2010 12:49 PM, walt wrote:
On 07/21/2010 03:18 PM, Bill Longman wrote:
Might I suggest a small hardware upgrade:
http://www.supermicro.com/Aplus/motherboard/Opteron6100/SR56x0/H8QGi-F.cfm
Hey, where's the parallel port for my Epson MX-80 printer?
You're aging yourself, Walt
On 07/21/2010 03:22 AM, Dale wrote:
Alan McKinnon wrote:
On Wednesday 21 July 2010 10:53:19 fajfu...@wp.pl wrote:
Hi
I've just switched to gcc 4.3.4 from 4.1.2 using gcc-config tool. I
don't
want to rebuild any package now. As time goes on my packages will be
compiled with new version.
On 06/23/2010 01:59 PM, Stefan G. Weichinger wrote:
Am 23.06.2010 00:27, schrieb Bill Longman:
- core i7 @ 1.6GHz gives me eight threads. The RAM is really fast, too,
so the overall system is very responsive. Great power savings stuff.
quite a plus with the box running for 10 hrs a day
On 07/21/2010 12:39 PM, Alan McKinnon wrote:
On Wednesday 21 July 2010 17:49:46 Bill Longman wrote:
And to play devil's advocate, I'll chime in with my experience. The 4.4
GCC, at least on AMD CPUs, creates noticeably faster code. I recompiled
all my packages after I upgraded to 4.4
On 07/13/2010 09:48 AM, Jarry wrote:
Hi,
subject says it all: I'm using gentoo over rather slow line,
and while syncing portage tree, lines keep scrolling so fast
it saturates my connection. How can I make emerge --sync
somehow less verbose?
I know, I can use --quiet, but then I do not see
On 07/11/2010 01:47 PM, Alan McKinnon wrote:
On Sunday 11 July 2010 20:42:54 cov...@ccs.covici.com wrote:
# unless a new maintainer can be found, this package is
# slated for removal.
#
# Removal on 2010-08-23
This is what I use for my mail reader -- with the emacs interface -- so
I am
Have I just misconfigured several of my KDE boxes or is there a problem
with KDE 4.4.4's system settings? The font installer worked fine in 4.3,
but whenever I go into system settings and try to get a list of the
fonts, it's just a blank box, whether I choose personal or system fonts.
No amount
On 07/12/2010 11:51 AM, Andy Wilkinson wrote:
Hi all,
I have been fiddling on and off for a few months now trying to get
Unicode font display in Terminal, which per the Gentoo Unicode docs as
well as its own, supports UTF-8 character sets. However, special
characters are not displayed.
On 07/12/2010 01:38 PM, Andy Wilkinson wrote:
On 07/12/2010 12:09 PM, Bill Longman wrote:
Try en_US.UTF-8 instead.
That did it. Thanks!
I am confused, though. Why am I setting LANG, etc, to en_US.UTF-8
when locale -a says en_US.utf8?
That's probably what the kernel thinks. If you
On 07/12/2010 01:52 PM, Mick wrote:
On Monday 12 July 2010 19:28:46 Bill Longman wrote:
Have I just misconfigured several of my KDE boxes or is there a problem
with KDE 4.4.4's system settings? The font installer worked fine in 4.3,
but whenever I go into system settings and try to get a list
On 07/12/2010 01:38 PM, Andy Wilkinson wrote:
For now I am happy that it works. Thanks again.
-Andy
For what it's worth, Andy, here's my setup:
/etc/locale.gen has:
en_US ISO-8859-1
en_US.UTF-8 UTF-8
el_GR.UTF-8 UTF-8
el_GR ISO-8859-7
and in /etc/env.d/02locale I have:
LANG=en_US.UTF-8
As for libpng I've straightened it out on 3 other machines to date,
all 64-bit, but this last machine is causing me fits. Fortunately I
have two of these machines with the same motherboard, processor, VGA.
Only sound is different. The other one worked out OK with libpng so
I'll likely just
On 07/07/2010 10:37 AM, Jarry wrote:
Hi,
I would like to see in console current network transfer rate
for given interface, similar as I can see cpu-loading in [%]
with top command.
Just single overall value in [bytes/second] or similar unit
would be enough for me, averaged over certain
On 07/01/2010 06:35 PM, meino.cra...@gmx.de wrote:
* Call stack:
* ebuild.sh, line 54: Called src_compile
* environment, line 5365: Called python_src_compile
* environment, line 5150: Called python_execute_function '-d' '-s' '--'
* environment, line 4058: Called die
*
On 07/01/2010 08:44 AM, SpaceCake wrote:
So, it solves the first problem, identifiying the device, but how can I
tell to udev to use always /dev/sds (for example) for this device? Also
I'm thinking how can I instruct udev to turn off swap when the device is
removed, but this is another story
On 07/01/2010 08:59 AM, SpaceCake wrote:
that's good if I want to mount at a specific location, but for swap I
need the device name, but this is changes depending on how many other
usb drives are connected. Looks lik this is a tricky question :)
No, you don't *NEED* the device name to mount
On 06/30/2010 08:03 AM, Grant Edwards wrote:
On 2010-06-30, Shoka sh...@gmx.ch wrote:
I'm trying to build kind of a minimal gentoo setup with X support. All I
need is
- X11 and a Window Manager
- Mozilla Firefox
- Lighttpd
I use Gnome at this time.
Gnome?!?!
That's like saying all
101 - 200 of 223 matches
Mail list logo
