Hey Everyone,
I have been at this for a week now, going from amd64 to x86. I still want to
use 2.6.30-r5. When trying to build vmware-server this is the error I am
presented with:
/var/tmp/portage/app-emulation/vmware-modules-1.0.0.15-r2/work/vmmon-only/linux/driver.c:
In function
Hey William,
Thanks again for your help I have attached the complete build log file. I
know with the layman overlay vmware-server 2 is easily done but I woule
rather vmware-server 1x. I know there are a few pathces for this I just want
to make sure after shcking with you guys what I should do.
Now for the real build log (oops)
vmware-modules-1.0.0.15-r2.ebuild
Description: Binary data
Arghhh to early in the morining here in Toronto. This is the build.log
build.log
Description: Binary data
Hey Guys,
I really apperciate your help but as it sits I am unable to compile
vmware-server 1.x or XEN. I have attached the build log. Basically I know I
can larman the new version of vmware-server2 but I heard it is a clunker. I
really need to get virtual servers up on the server before I get
Hello Everyone,
I have been at this for a week, and I am stumped. Trying to emerge
vmware-server 1.0.9 using x86 environment and 2.6.30 kernel. I gave up on
amd64 earlier this week please help. Attached is the build.log
Thanks In Advanced!
Ninus.
build.log
Description: Binary data
Hello Group,
I do not meean to be persistent regarding this problem but I am unable to
emerge vmware-server or xen. the error I am experioencing is attached at a
the build.log.
Environment: x86, 2.6.30-r5
Your Help is Greatly Appreciated,
Ninus
build.log
Description: Binary data
Hey Walt,
Thank you for your response, I know that there is a number of patches out
there but I just want to know which one to use. Surely someone has
vmware-server 2 or XEN, or Virtual box running off of the 2.6.30-r5 kenrel.
I know that I can uise layman and emerge vmware-server 2 the problem
Do any of the emulators work with 2.6.30r5 kernel? I am not bound to only
vmware, what about XEN, VirtualBox etc...
Thanks In Advnaced,
Ninus.
Hey Neil,
I tried to compile virtualbox using intructions here
http://en.gentoo-wiki.com/wiki/VirtualBox;. And it was unsuccesful, I have
attached the build.log
Regards,
Ninus.
build.log
Description: Binary data
Hello Everyone,
I have a fresh isntall x86 and I am trying to emerge vmware-server 1.0.9,
and I am presented with the follwoing:
* Checking for suitable kernel configuration options...
* CONFIG_UNUSED_SYMBOLS: is not set when it should be.
* Please check to make sure these options are
Hey Stefan,
I figured that much, I am in .config - Linux Kernel v2.6.30-gentoo-r5
Configuration right now and I cannot find CONFIG_UNUSED_SYMBOLS. Where the
hell is this things.
Thanks In Advanced!
Ninus
Hello Everyone,
I moddified the CONFIG_UNUSED_SYMBOLS paramter and when trying to emerge
vmware-server I am presented with another error:
*
* ERROR: app-emulation/vmware-modules-1.0.0.15-r2 failed.
* Call stack:
* ebuild.sh, line 49: Called src_compile
*
Hello Everyone,
I moddified the CONFIG_UNUSED_SYMBOLS paramter and when trying to emerge
vmware-server I am presented with another error:
*
* ERROR: app-emulation/vmware-modules-1.0.0.15-r2 failed.
* Call stack:
* ebuild.sh, line 49: Called src_compile
*
I emerged vmware-modules with no problem but still have a hard time with
vmare-server:
* ERROR: app-emulation/vmware-modules-1.0.0.15-r2 failed.
* Call stack:
* ebuild.sh, line 49: Called src_compile
* environment, line 3723: Called linux-mod_src_compile
*
Hey Everyone,
I emerged vmware-modules with no problem but still have a hard time with
vmare-server:
* ERROR: app-emulation/vmware-modules-1.0.0.15-r2 failed.
* Call stack:
* ebuild.sh, line 49: Called src_compile
* environment, line 3723: Called
Hello Everyone,
I am having no luck at all trying to emerge vmware-server 1.0.9 using kernel
.30 r5. I know vmware 2 can be instlled easily using layman but I do not
want that clunker on this 16 core server. The show must go on... what is my
safest bet XEN? I need an emulator that can handle
I was thinking XEN how will that par up compared to virtualbox?
Hello Everyone,
what emerge parameters recompiles everything in my gentoo environment afer
changing use flags
emerge --update --deep --*newuse* world?
I issued a
emerge -e world
and I saw it was installing 450 things so I ctrl+c the process, did I
kill everything.
Anyhow I would like to
Hello Everyone,
I am recieving the following message when trying to compile virtualbox. I
receieved the same error when trying to compile vmwareserver
*
* ERROR: app-emulation/virtualbox-modules-1.6.6-r1 failed.
* Call stack:
* ebuild.sh, line 49: Called src_compile
*
I have a kernel recompiled here, and I would like to copy over the bz to
boot. I have a /boot that I can access but I do not think this is it (there
is nothing in there). When I 'mount /boot' I get unkown filesystem type
'ext2'. I have followed Gentoo Handbook direction for the installation of
the
Hell Sir,
Thank You for your response, I did add it after I sent the original message,
chrooted, mounted, and copied over trhe new bzimage file to the /boot
partition. Now I am getting special device dev/sda1 does not exist when
trying to issue a mount /boot
Thanks In Advnaced,
Ninus
Hello Everyone,
Thank you all for your help, im an idiot everything works perfect. The only
problem I am having is that when xdm is loading I am using nvidia-drivers,
xdm loads and nothing works no keyboard etc... I am almost there xorg.conf
looks ok, modprobe nvidia with no issues. I cannot
I am using a Dell D820 ICH7 family, I am chking to see if appropriate
modules have been selectd in the kernel right now.
Reagrds,
Ninus.
Exactly!
In console everything is find. but when I issue startx my keybaord and mouse
are non functional. I did remerge xf86 mouse and keyboard and still nothing.
I looking into xorg.conf.
Regards,
Ninus
Hello Everyone,
I got gnome to fire with some problems:
1) startx startx gnome but rc-update add xdm default starts xdm:
~/.xinitrc: exec gnome-session
/etc/conf.d/xdm: DISPLAYMANAGER=gdm
That is not my problem, the reason why I am almost getting blue in the face
is because when I issue a
dbus is running yes.
Please Help :)
hald is running too
When I do a:
rc-update add xdm default
Gentoo does not fire up but rather xdm, and my root login fails even thought
I know its the right username password.
Regards,
Ninus.
No direcotry, logging in with HOME=/ is this a mount issue. Ican start
gentoo but nothing works, cannot start firefox, console etc... I get the no
direcotry message when I log in using console.
Regards,
Ninus
I was considering something as is pointed out at the following link:
http://www.howtoforge.com/setting-up-a-loadbalanced-mysql-cluster-with-mysql5.1
Regards,
Ninus
Hello Sir,
~/.xinitrc: exec gnome-session
/etc/conf.d/xdm: DISPLAYMANAGER=gdm
Thank You For Your Response, I did do that. I had Gnome fireed up and
working fine, then I am not sure what was it I did that now it fires up
using startx but nothing works, my session is not loaded etc..
Thanks In
oops I did mean gnome
I just created a new user and the home firecotry is fine. However my root
user has no home. I did not rename it and /dev/sda3 is mounted. I tries
useradd -m root, I am getting useradd:user root exists.
fstab - dev/sda3/ ext3 noatime
Thanks in Advnaced,
Ninus
oops, i'm stupid, I tries to login xdm using root, I saw this was possible
using gnome so I figures what the heck. So that is fine (not being able to
login xdm using root). But I still have a problem in regard to gnome not
being able to work. Firefox does not start, nothing starts not even
Yes of course Now when I fire up gnome, I see nothing on my desktop and
nothing is working (cannot open console, or firefox etc..). I When I
load gnome I see:
please contact your system administration to resolve the follwoing issue:
could not resolve the address xml:readwrite:d/.gconf in the
Ok I just created a new user and gnome works fine, but with my root it is
getting the errors described above.
Yes for sure, hmmm but its broken an I want to fix it. I have logged into X
using root just earlier today and now when I log into console using root I
get the No direcotry, logging in with HOME=/. I would like to fix this.
fstab is as per the gentoo documentation.
Regards,
Ninus
oops. I think trying to fiz my original problem of gnome+root, I invented a
new one root console + error message (No direcotry, logging in with HOME=/).
This is not an error root has /root not home so when someone logs into
console using root this message will always show? Sorry about that
Hello Everyone,
Please disregard any previous emails from me, I was using a differnt
computer to send emails then my almost alive gentoo box (can't wait)
Just a few porblems with this fresh install:
When logging into gnome I presented with the follwoing messagebox:
There was an error starting
Hey Walt,
Thank you so much for your response, I am sitting behind the machine right
now. (I know we are not suppose to but I just want it to be working as
expected) Basically when using root user and logging into console I get my
first suspicious message, No direcotory, logging in with HOME=/,
That does not fail. I can cd /root/Desktop perfectly. What I decided to do
is a fresh install to see where it was that I went wrong. fstab and mtab
looked ok.
I did load the live cd, mounted and chrooted over and saw that echo $HOME
did return /root.
If I do not make mistakes I will not learn.
We are looking to set up a cluster that uses MySQL, UltraMonkey and yours
truly Gentoo. Where best to check first then the group of the O.S. of
choice. Anyone have any feedback, comments, advice etc... please send them
this way. We are looking to set it up for free as in beer so which MySQL
The database cluster will be the backend to our own Customer Relation
Management System that needs to be scaled to size and performance. In
terms of what is and not is avail in the portage tree can we not just build
5.1 from binary source how hard is this lb_curses etc The problem
with MySQL 5
I should also point out that we are interested in load balancing and high
availability.
Regards,
Ninus.
Hello Everyone.
Long time user not the first time fu_ _ up. I emerge --umerrge e2fsprogs
because I was trying to emerge gnome-light. Anyhow I forgot to
emerge e2fsprogs now I am recieving the libbkid.s0.1 cannot open error
message. proc mounting proc [oops] at bootup. Can I fix this without
Hello Everyone.
I am trying to update-python and I am stuck at checking for working
mkstemp. for ever, what should I do.. This is a fresh install AMD64.
Thanks in Advanced,
Ninus.
I did not change CHOST just CFLAGS and CXXFLAGS as per the manual.
h
Regards,
Ninus
Not a problem
--
W. Nick Pappin
On Thu, Jul 9, 2009 at 7:03 PM, Dave dave.meh...@gmail.com wrote:
Hello,
I had the LSI driver loading as a module. I recompiled the kernel
and made it monolithic, put in the raid and other drivers in that way and
rebooted. It is working
Do you have the lsi fusion kernel driver installed?
--
W. Nick Pappin
On Thu, Jul 9, 2009 at 12:44 PM, Dave dave.meh...@gmail.com wrote:
Hello,
Thanks for your reply. I did change the type of the partitions on
both disks to fd linux raid autodetect. When i rebooted in to the live CD i
has a
point when you ran fdisk did you change the partition type to auto detect
raid.
--
W. Nick Pappin
On Wed, Jul 8, 2009 at 6:35 AM, Neil Bothwick n...@digimed.co.uk wrote:
On Wed, 8 Jul 2009 08:07:04 -0400, Dave wrote:
Upon reboot i'm seeing mdadm
trying to detect the two disks
Its been a while since ive used paludis, but do you have the folder
permissions set correctly? Normally paludis will (or it used to anyway)
complain loudly when the permissions werent set correctly.
If they are set correctly what happens when you try to pull the git repo
manually?
- Nick
2009/5
, but make sure to do a full search, as
there are misunderstandings of depclean all over b.g.o.
Nick
would recommend against
running it as a script, but rather do the steps individually (also, if
you aren't running amd64, be sure to change the architecture of the
binaries you are downloading).
Read this line as typical warnings of your mileage may very etc.
Nick
#Version 0.2, written by Nick
/xscreensaver
gnome-extra/gnome-screensaver
x11-misc/xlockmore ) )
so either gnome-screensaver or xlockmore will be pulled in to compensate.
Nick
to do
here, but I won't post it since I'm not terribly sure. Someone with more
expertise could help here, but I suspect either method 1 or 2 will work.
Nick
is installed as part of this upgrade, and
then the block is resolved. The output of equery list -p gail should
tell you if gail-1000 is masked for some reason. Unmasking gail-1000
should resolve the block, but why it is masked in the first place is
rather a mystery.
Nick
Michael P. Soulier wrote:
On 21/03/09 Nick Fortino said:
It seems like you are reading the message correctly, but you are focusing
on the wrong part. The problem here is gail, not gtk+. What should happen
is gail-1000 is installed as part of this upgrade, and then the block is
resolved
might have
Listening to your hard drive grind away should convince you it's doing
what you want. It should also convince you to use eix.
Either way you do it, media-video/keno is the only one
Nick
be useful (im not saying anything about paludis before any flamewars
start, just wanting to rule out the package manager as a cause).
It looks like its failing on something to do with webkit maybe, so try
rebuilding webkit first?
Just some ideas to get you started :)
- Nick
emerging).
Of course, all these things wont stop you causing breakages, but if you work
cautiously and have some idea of what your doing then gentoo does work very
well as a server.
- Nick
, there may have been something on the forums too that helped trim
the tree down aswell so theres no harm in searching there.
- Nick
explaining how to work around it and
get mysql working so amarok2 builds ok.
- Nick
that if you try this it is
totally unsupported and will likely get you flamed/ignored/laughed at if you
encounter problems :)
- Nick
it, it was very raw (you'll lose
data/formatting when converting).
Paul
I believe if you build OO from source using portage you get GO-OO, however
if you use OO-bin you just get the plain OO package.
- Nick
this, however i dont recall if
transmission has this option.
- Nick
of useful
programs to install, and then updated them all to build from ~ARCH and use
the funtoo portage tree. My only problem now that im figuring out is how to
use the script in the sysrescd repo to combine the x86 and amd64 cds into
one unified final cd.
- Nick
believe theres a qt-copy in the THE overlay, although i havent had a
chance to confirm it.
- Nick
from baselayout 1 they may not be automatically
added to the right runlevels.
- Nick
-localization.xml
It may not fix your problem but it should help you at least ensure your
system is setup correctly for the languages you want to use.
- Nick
on the gentoo forums and the wiki i think for
setting up binpkg hosts.
- Nick
(and especially low RAM) machine is ill-advised and can often
be the cause of build failures as OO is well known to require a lot of RAM
and hdd space while it compiles.
- Nick
with my
hardened kernel settings?
- Grant
That looks suspiciously like its to do with your hardened setup.
I too have 64bit FF and 64 flash working nicely here, so glad to be done
with nspluginwrapper, which barely ever worked for me anyway :(
- Nick
of well tested packages from ARCH, or the chance to
get newer packages, but with a chance of bugs and potential breakage by
using ~ARCH.
Im a happy ~ARCH user myself, and have been for a long time, however i do
stick to using plain ARCH on my little server just to keep it stable and
happy.
- Nick
have to add them to /etc/portage/package.keywords aswell as i think
they are still ~ARCH only.
If you not sure whats needed then emerge the program autounmask and that
will add all the entries (including any dependancies) automatically.
- Nick
migration guide or you risk severely hosing
your system!
http://www.gentoo.org/doc/en/openrc-migration.xml
- Nick
the 0.9.3 ebuilds attached to
bugzilla [1], however if your feeling brave the live - ebuilds do work
quite well.
- Nick
[1] http://bugs.gentoo.org/show_bug.cgi?id=232036
solution is to move to the new gecko-mediaplayer which is
built for firefox 3 and is the successor to mplayer-plugin.
- Nick
imagine once portage 2.20 goes stable we'l see great set adoption.
An easy way to see what sets are available is to use the emerge --list-sets
command.
-Nick
2009/1/13 Chris Lieb chris.l...@gmail.com
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Nick Cunningham wrote:
2009/1/13 Chris Lieb chris.l...@gmail.com mailto:chris.l...@gmail.com
I've noticed lately on the ML that people have been talking about
using
package sets
2009/1/13 Paul Hartman
paul.hartman+gen...@gmail.compaul.hartman%2bgen...@gmail.com
On Tue, Jan 13, 2009 at 1:37 PM, Chris Lieb chris.l...@gmail.com wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Nick Cunningham wrote:
2009/1/13 Chris Lieb chris.l...@gmail.com mailto:chris.l
like sourceforge that may cause you problems.
- Nick
of baselayout (and openrc if you run ~arch).
For reference xdm should be the 2nd to last (or thereabouts) script to run,
normally just before local.
(also, are you sure this is X starting and not just a framebuffer splash?)
- Nick
!
rc_parallel=NO
Ideally you want it set to NO to ensure everything starts when it is meant
to.
Hopefully one of these suggestions will help, if not the next idea is to
move to openrc if your not already as that may help, although there is some
risk involved in the upgrade.
- Nick
read the migration
guide and follow it to the letter otherwise you risk being left with an
unbootable system: http://www.gentoo.org/doc/en/openrc-migration.xml
- Nick
On Sat, Oct 25, 2008 at 01:34:36PM +0200, Volker Armin Hemmann wrote:
On Samstag 25 Oktober 2008, Nikos Chantziaras wrote:
Nick Stinemates wrote:
On Sat, Oct 25, 2008 at 02:07:20AM +0300, Nikos Chantziaras wrote:
My router has big problems assigning the correct IPs to Gentoo boxes
On Sat, Oct 25, 2008 at 02:07:20AM +0300, Nikos Chantziaras wrote:
My router has big problems assigning the correct IPs to Gentoo boxes. If
the NIC in the box has a MAC address of, say, 01:00:12:11:41:49:1e,
dhcpd reports something else to router: ff:42:54:59:20:00:1c:21:e0:42:c2
Why is
I would second all of this I use gentoo-wiki almost everyday and it is
killing me that it isnt up. I think this would be a great service if
we can give it to the community.
--
W. Nick Pappin
IT Staff
Latah Federal Credit Union
208.874.4394
On Thu, Oct 23, 2008 at 6:43 AM, Steven Susbauer
well could you use wget to get the files because they have a built in
rate limiter so you can say 120K or whatever
Nick
On Wed, Aug 20, 2008 at 8:57 AM, Neil Bothwick [EMAIL PROTECTED] wrote:
On Wed, 20 Aug 2008 15:21:48 +0100, [EMAIL PROTECTED] wrote:
Maybe I should upgrade to the latest
directory to the $PYTHONPATH.
To see what that is:
[EMAIL PROTECTED] ~ $ echo $PYTHONPATH
/usr/lib/portage/pym
Next option is to put it in /usr/lib/python2.4(or 2.5)/site-packages
Last, but certainly not least, put the python module in your python
projects root directory
--
Nick Stinemates
?
I don't have a direct answer, but it depends on the configuration of the
firewall. You can analyze for content and you can also allow all traffic.
--
==
Nick Stinemates ([EMAIL PROTECTED])
http://nick.stinemates.org
AIM: Nick Stinemates
MSN: [EMAIL PROTECTED]
Yahoo: [EMAIL
for a while so I assume it
needs qt3 but yet KDE 4.0 needs qt4 if I understand correctly. What's
the best thing to do here?
Thanks
Dale
:-) :-)
Are you sure you didn't unmask your qt package using
/etc/portage/package.keywords and install the wrong version?
--
==
Nick Stinemates
-nl -pl
-pt_BR -ru -se -zh_CN
* media-libs/win32codecs [R 20071007-r2] target
-real
Does anyone have any suggestions?
Perhaps if nothing comes to light in the next few days you could
open a bug report?
Good luck,
Nick
--
GPG Key : www.njw.me.uk/nick.gpg.asc GPG Key ID
; fixing.
Evidently it doesn't do a very good job of fixing, as the message
appears every time. I tried mkfontcache etc to no avail, and was
wondering if anyone else experiences this, what it means, and how to
stop it complaining?
Thanks for any advice / clues.
Nick
--
GPG Key : www.njw.me.uk
bet for the firmware route, which I'd
recommend (AFAIK breaking css is illegal under the dmca anyway, so
I can't see this as being a much bigger legal issue than playing any
encrypted DVD under Linux). IANAL, of course. If in doubt, move to
Finland.
-Nick
Can't find rpcl.org
breaking css is illegal under the dmca anyway, so
I can't see this as being a much bigger legal issue than playing any
encrypted DVD under Linux). IANAL, of course. If in doubt, move to
Finland.
-Nick
--
GPG Key : www.njw.me.uk/nick.gpg.asc GPG Key ID: 04E4653F
GPG Fingerprint: 9732 D7C7 A441 D79E
)(-a52 -debug dvd
-ffmpeg -flac gnome -hal -lirc -mad -mpeg nsplugin -nvtv ogg
-seamonkey -theora vorbis -xulrunner -xv)
Homepage:http://gnome.org/projects/totem/
Description: Media player for GNOME
--
[EMAIL PROTECTED] mailing list
--
Nick Rout
--
[EMAIL
I have a much abused gentoo system on which I was trying to update eix.
I get quite a few errors and i am not sure how far back up the output to
go. Heres the last bits anyway. Can anyone tell me what I can do to fix
that?
../../src/search/redundancy.h:37: error: syntax error before `,' token
On Wed, Jun 20, 2007 at 09:50:04AM +0200, Alan McKinnon wrote:
On Wednesday 20 June 2007, Nick wrote:
So, I'm planning to run sudo emerge --sync and sudo glsa-check -f
new from a cron job, perhaps once a week.
I can set up the sudoers part all fine, but is there anything I
should
, perhaps once a week.
I can set up the sudoers part all fine, but is there anything I
should watch out for / consider when running these maintenance tools
from a cron job?
Thanks,
-Nick
--
GPG Key : www.njw.me.uk/nick.gpg.asc GPG Key ID: 04E4653F
GPG Fingerprint: 9732 D7C7 A441 D79E FDF0 94F6
101 - 200 of 933 matches
Mail list logo
