On Tue, 5 May 2009 16:23:13 -0700 (PDT), maxim wexler wrote:
grub.conf:
default 0
timeout 10
title Gentoo
root (hd0,0)
kernel /boot/kernel root=/dev/sda2 # 'kernel /kernel' also works
kernel /kernel is the correct setting when you have a separate /boot, the
other only works because of
On Wed, 6 May 2009 06:24:08 +0600, Mike Kazantsev wrote:
But you don't have to!
Just setup first apache to forward requests to the second one in any
way you like using mod_rewrite:
If the second server is only serving HTTPS, you don't even need that.
Just have the router forward port 80 to
Hi,
kde:3.5 poses me a Gordian knot which I cannot cut.
Besides the whole kde:4.2 packages I still have kde:3.5 packages.
Trying to re-emerge e.g. kde-base/kdepim:3.5 I get blocking packages.
Many packages are built with kde-base/kdelibs-3.5.10-r2 but some
are in use with were built with
On Mittwoch 06 Mai 2009, Helmut Jarausch wrote:
Hi,
kde:3.5 poses me a Gordian knot which I cannot cut.
Besides the whole kde:4.2 packages I still have kde:3.5 packages.
Trying to re-emerge e.g. kde-base/kdepim:3.5 I get blocking packages.
Many packages are built with
Hi. I upgraded to python 2.6 -- at the time I didn't know that this
would break mailman, buut there is a version of mailman compatible
with 2.6 -- is there any ebuild for this? I doubt it would be
possible todowngrade to 2.5 -- at least not without great difficult.
Please correct me if I am
Volker Armin Hemmann writes:
On Dienstag 05 Mai 2009, Alex Schuster wrote:
I cannot access /dev/dsp once Amarok 2 has started playback, even if
the playback was stopped. I have to close Amarok, then /dev/dsp is
accessible again. Does anyone know why this is?
[...]
no problem here. So..
On Mittwoch 06 Mai 2009, Alex Schuster wrote:
Volker Armin Hemmann writes:
On Dienstag 05 Mai 2009, Alex Schuster wrote:
I cannot access /dev/dsp once Amarok 2 has started playback, even if
the playback was stopped. I have to close Amarok, then /dev/dsp is
accessible again. Does anyone
Neil Bothwick wrote:
If the second server is only serving HTTPS, you don't even need that.
Just have the router forward port 80 to the first server and port 443 to
the second.
That leaves the HTTPS server open to the public though, which is
specifically not allowed to the OP.
I would say
On Wed, 06 May 2009 11:09:50 +0100, Anthony Metcalf wrote:
If the second server is only serving HTTPS, you don't even need that.
Just have the router forward port 80 to the first server and port 443
to the second.
That leaves the HTTPS server open to the public though, which is
On Wed, 06 May 2009 07:29:51 +0200
Robert Cernansky wrote:
...[snip]...
Back to 8x13... I must admit now it's a mystery for me why X does
not find 8x13 while it finds 6x13. Try following:
1. Do 'equery belongs /usr/share/fonts/misc'
This gives you list of all packages that have some files
On Wed, 6 May 2009 05:06:51 -0400
John covici wrote:
Hi. I upgraded to python 2.6 -- at the time I didn't know that this
would break mailman, buut there is a version of mailman compatible
with 2.6 -- is there any ebuild for this? I doubt it would be
possible todowngrade to 2.5 -- at least
Neil Bothwick wrote:
On Wed, 06 May 2009 11:09:50 +0100, Anthony Metcalf wrote:
If the second server is only serving HTTPS, you don't even need that.
Just have the router forward port 80 to the first server and port 443
to the second.
That leaves the HTTPS server open to
on Wednesday 05/06/2009 David Relson(rel...@osagesoftware.com) wrote
On Wed, 6 May 2009 05:06:51 -0400
John covici wrote:
Hi. I upgraded to python 2.6 -- at the time I didn't know that this
would break mailman, buut there is a version of mailman compatible
with 2.6 -- is there any
On Wed, 6 May 2009 05:06:51 -0400, John covici wrote:
Hi. I upgraded to python 2.6 -- at the time I didn't know that this
would break mailman, buut there is a version of mailman compatible
with 2.6 -- is there any ebuild for this? I doubt it would be
possible todowngrade to 2.5 -- at least
Hi,
On Wed, May 6, 2009 at 3:42 AM, Alan McKinnon alan.mckin...@gmail.com wrote:
Here's my current policy file for comparison (mostly untouched
from default):
Thanks for pasting that. Comparing your config to mine, I noticed my
MaxTapMove was set to 2000, much higher than yours. Somehow I
On Wed, May 6, 2009 at 01:31, maxim wexler bliss...@yahoo.com wrote:
You gotta use a delay (or wait, can't remember exactly)
parameter
for the kernel to wait while the disc is recognized, dunno
exactly,
but 2 to 5 seconds should be enough. I have an EEE 701 and
Well there's a 10 sec
on Wednesday 05/06/2009 Neil Bothwick(n...@digimed.co.uk) wrote
On Wed, 6 May 2009 05:06:51 -0400, John covici wrote:
Hi. I upgraded to python 2.6 -- at the time I didn't know that this
would break mailman, buut there is a version of mailman compatible
with 2.6 -- is there any
On Wed, 6 May 2009 09:52:08 -0400, John covici wrote:
There is a bug filed for this, so an updated ebuild should appear
shortly. Meanwhile, what's wrong with installing Python 2.5? It's
slotted, so you can have 2.5 and 2.6 installed together, or simply
switch back to 2.5 until a new
On Wed, 6 May 2009 10:46:15 -0300, Daniel da Veiga wrote:
Yeah, the kernel must wait for the root device to be ready, the root
device on EEE is on a USB bus. Add rootwait to the kernel line.
Are you sure about that? On my 900, lshw shows sda and sdb to be ATA
devices. Only sdc, the card slot,
On Wed, May 6, 2009 at 11:03, Neil Bothwick n...@digimed.co.uk wrote:
On Wed, 6 May 2009 10:46:15 -0300, Daniel da Veiga wrote:
Yeah, the kernel must wait for the root device to be ready, the root
device on EEE is on a USB bus. Add rootwait to the kernel line.
Are you sure about that? On my
On Wed, 6 May 2009 09:52:08 -0400
John covici cov...@ccs.covici.com wrote:
The question is, I would not mind switching back to 2.5, but how do I
do this -- I had to run pythonupdater to switch from 2.5 to 2.6, what
is the procedure to do the reverse?
Make sure python-2.5 is installed:
emerge
On Wed, 6 May 2009 14:59:40 +0100, Neil Bothwick wrote:
otherwise you only need to use
python-config to switch back.
That should be eselect python, as Peter outlined in his post.
--
Neil Bothwick
WinErr 005: Multitasking attempted - System confused
signature.asc
Description: PGP
on Wednesday 05/06/2009 Neil Bothwick(n...@digimed.co.uk) wrote
On Wed, 6 May 2009 14:59:40 +0100, Neil Bothwick wrote:
otherwise you only need to use
python-config to switch back.
That should be eselect python, as Peter outlined in his post.
--
Neil Bothwick
WinErr
Volker Armin Hemmann wrote:
On Dienstag 05 Mai 2009, Mark Knecht wrote:
On Mon, May 4, 2009 at 4:23 PM, Volker Armin Hemmann
volkerar...@googlemail.com wrote:
On Dienstag 05 Mai 2009, Mark Knecht wrote:
SNIP
Thanks Brandon. I'm up in X now on the 6200 AGP so it's functional.
glxgears seems
7v5w7go9ub0o wrote:
FWICT, NVidia 180.51 appears to be working on this box without the
consolekit.
# glxinfo | grep direct
direct rendering: Yes
GL_EXT_depth_bounds_test, GL_EXT_direct_state_access,
nvidia is masked on my hardened overlay/AMD64; on a lark tried the .run
script
The kernel takes a little time to detect and settle the bus
to detect
the devices. At least adding rootwait and
rootdelay=10 to the
kernel line solved my problems.
Tried rootwait by itself and with rootdelay=10 and rootdelay=10 by itself
Well, the triple E still don't boot: either it
On Wed, May 6, 2009 at 14:11, maxim wexler bliss...@yahoo.com wrote:
The kernel takes a little time to detect and settle the bus
to detect
the devices. At least adding rootwait and
rootdelay=10 to the
kernel line solved my problems.
Tried rootwait by itself and with rootdelay=10 and
Am Mittwoch, 6. Mai 2009 19:11:56 schrieb maxim wexler:
VFS: Cannot opent root device sda2 or unknown-block(0,0)
Please append a correct root= boot option: here are the available
partitions:#doesn't say what they are Kernel panic = not syncing:
VFS: Unable to mount root fs on
Hi list,
I have VPN connection to private network with non-public
*.private.mydomain.tld.
*.private.mydomanin.tld has to be translated throu 1.2.4.3 and
everything else throu 2.3.4.5 , how to define that?
Thanks,
krasko
Hi,
would you please be so kind not to hijack other threads.
Thanks...
Dirk
signature.asc
Description: This is a digitally signed message part.
On Wed, May 6, 2009 at 16:51, maxim wexler bliss...@yahoo.com wrote:
Well, it seems your kernel lacks support for the disks. Are
you sure
you compiled in all the necessary USB, SATA disk support?
Still panics
chrooted, ran make menuconfig, make make modules_install and copied over
the
maxim wexler bliss...@yahoo.com writes:
Are you
using an initrd?
No, never used one on a gentoo box before. That's a fedora thing, isn't it?
Nope! Its not distribution specific. It's a kernel feature.
Regards,
Masood Ahmed
--
Promptness is its own reward, if one lives by the clock instead
# CONFIG_BLK_DEV_IDE_SATA is not set
deprecated, possible conflict but I set it anyway
# CONFIG_SATA_AHCI is not set
doubtful if I need it but set it anyway
# CONFIG_SATA_PMP is not set
definitely nothing to do with my system, didn't set it.
Not sure, anyway, try it...
Still
On Wed, May 6, 2009 at 4:38 PM, maxim wexler bliss...@yahoo.com wrote:
# CONFIG_BLK_DEV_IDE_SATA is not set
deprecated, possible conflict but I set it anyway
# CONFIG_SATA_AHCI is not set
doubtful if I need it but set it anyway
# CONFIG_SATA_PMP is not set
definitely nothing to do
cd ../devices/pci:00/:00:1f.2/
ls -al driver
(should show something like)
lrwxrwxrwx 1 root root 0 May 6 16:49 driver -
../../../bus/pci/drivers/ata_piix
From this I can tell that it is the ata_piix
Mine too! Yippee!
The eeebox has landed! Thanks man!
MW
Hi,
I have an external USB IBM ThinkPad UltraNav keyboard[1] attached to
my laptop and I'd like to get scrolling to work. Currently to scroll I
mouse over the scrollbar, click and move the pointer. I have looked at
some resources[2][3][4] but was unsuccessful.
I'll append some information on my
36 matches
Mail list logo
